|
The mixture of rosewater and lemonade gives this soap a tantelizing fragrance that will delight everyone. With a cool layered design, this soap is sure to be a hit!
Recipe Ingredients:
Measure ingredients with a scale or precise measuring tool.
Equipment From Home:
• (1) Safety Equipment (goggles,mask,gloves)
• (1) Polypropylene Pitcher
• (1) Polypropylene Container for lye
• (1) Scale - Digital Display
• (1) Spatula
• (1) Microwave-Safe Container
• (1) Microwave
• (1) Stove Top and Metal Pot
• (1) Thermometer - Digital
• (1) Stick Blender
• (1) Container for Mixing Color
• (1) Fine Mesh Tea Strainer
• (1) Metal Spoon for texturing
Recipe Disclaimer:
We are not responsible for the products you create from our supplies.
You alone are responsible for product and recipe testing to
ensure compatibility and safety.
|
Directions:
NOTE: This project and these instructions have been written for someone who has experience making soap and knows the potential dangers due to working with sodium hydroxide. It will not outline safety methods of working with dangerous chemicals, it is simply a soap recipe for advanced soapmakers.- Prepare the lye solution by weighing the water and lye in two separate containers. Pour the lye into the water, carefully mix in a well-ventilated area and set aside to cool while you prepare your oils.
- Melt the solid oils either by microwave or stovetop. Melt just until melted and no more.
- Add the liquid oils to the melted oils to bring down the temperature. Add the fragrance oil to the oil mixture and stir.
- Once the lye water has cooled down to 90°F, pour the lye solution into the oils.
- With stick blender, blend with small bursts and stirring until it is emulsified to a light trace.
- Pour half of the mixture into a separate container. Add pink colorant and use the stick blender to thicken. Pour into the mold.
- Using a tea strainer with charcoal powder, sprinkle a layer of charcoal over the layer of soap in the mold. You don't want it to completely cover the soap or the soap layers will not stick. Make sure you have some bottom layer of soap peaking through.
- Lightly spoon the remaining soap over the charcoal. It will help spread the charcoal into a solid line.
- Use a craft stick or spoon to make fluffy peaks in the soap.
- Allow your soap to harden overnight and unmold the next day. If the soap is too soft to remove from mold, allow soap to harden an additional 24 hours.
- When soap is removed from mold, cut into 1 inch slices. To reduce dragging the charcoal line during the cut, put soap on its side to cut.
- Cure your soap for a minimum of 4 weeks.
To Use: Lather onto wet skin and rinse with warm water. Avoid contact with eyes.
Ingredient Label: Olive Oil, Coconut Oil, Water, Sodium Hydroxide, Cocoa Seed Butter, Avocado Oil, Castor Seed Oil, Rose Hip Seed Oil, Fragrance, Activated Charcoal, Red 28, Red 22.
|
