|
|
15 Cavity Euro Rectangle Silicone Soap Mold 1613 |
|
|
|
 |
Additional
Information |
|
Directions &
Ingredients |
|
SDS &
Documents |
|
|
This silicone soap mold allows for soapers to create a modern version of the classic rectangle soap. The soap made with this mold is slightly narrower and slightly thicker than a traditional bar.
Common Uses:
Melt & Pour Soap (MP). Cold Process Soap (CP). Cold Process Oven Process Soap (CPOP). Hot Process Soap (HP). Lotion Bars.
Points of Interest:
Maximum Temperature: 500ºF
Manufacturer: Crafter’s Choice®
Material: Silicone
Country of Origin: China
Country Of Origin: China
|  | This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a). |
|
|
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.
Directions:
Melt & Pour Soap: Pour melted soap into silicone mold cavities. Allow soap to cool at room temperature until hard. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Cold Process Soap: Pour soap at trace into the mold cavities. After at least 24 hours, gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface and gently push on the bottom of mold until the soap starts to release. Grab hold of the soap with a gloved hand, and allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Cold Process/Oven Process Soap: Pour soap at trace into the mold cavities. Preheat oven to 170ºF then place mold in oven. Turn oven off, and keep soap in oven overnight. The next day remove mold from oven. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Allow soap to cure for 2 to 4 weeks.
Hot Process Soap: Scoop hot process soap into mold cavities. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Lotion Bars: Pour melted lotion bar mixture into mold cavities. Allow mixture to solidify. Carefully remove lotion bars from mold by gently pulling the sides away from the lotion bars, and then push on the bottom of the mold until the lotion bars starts to release. Grab hold of lotion bar and carefully pull out of mold.
Care:
Hand wash in warm sudsy water.
| Average Customer Rating: |
 |
(45 Reviews) |
|
Natassia • New York
Date Submitted: 04/15/2021
I Recommend This Product!
|
|
"Amazing" |
|
COMMENTS: used it for my cold process soap and its super cute! I didn't need a wooden box to hold it up which was great and soaps were easy to remove. Will buy more!
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Christine • Georgia
Date Submitted: 05/08/2020
I Recommend This Product!
|
|
"My favorite mold" |
|
COMMENTS: This is by far my favorite mold. It's well made--not too stiff, not too soft. I've never had a problem with the soap releasing from it, it's a perfect size that fits in your hand comfortably and makes a nice presentation when wrapped with a cigar band. The one time I saw it on sale, I bought two; wish I had bought five. A great mold.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Good number of cavities.
• Well-made mold with easy soap release.
|
|
|
|
|
|
Vicky • West Virginia
Date Submitted: 10/13/2019
I Recommend This Product!
|
|
"Love the bar shape" |
|
COMMENTS: This is an excellent mold. Don't let the dimensions throw you off. It produces a bar of soap no less than 4.5 ounces depending on the soap formula. Love, love, love this mold!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP
|
|
|
|
|
Gio84 • Connecticut
Date Submitted: 05/02/2019
I Recommend This Product!
|
|
"Great Soap Mold!" |
|
COMMENTS: Fantastic soap mold! Very easy to use and nice size.
Very happy with the product
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• how easy it is
|
|
|
|
|
|
Tammy / Todd • California
Date Submitted: 01/19/2019
I Recommend This Product!
|
|
"15 Cavity Euro Rectangle Silicone Soap Mold 1613" |
|
COMMENTS: This mold is a must when making larger batches. Soap releases easily and the next batch is ready
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Casita • Texas
Date Submitted: 12/23/2018
I Recommend This Product!
|
|
"Juuust Right." |
|
COMMENTS: I have a medical issue that causes my hands to shake. That’s turned out to be a problem with making loaves of soap - with all the unmolding and cutting, even with a cutter. I still wanted a somewhat hefty bar that could comfortably fit in my hands. And this sealed the deal. I’m back to order the 5 pack and I’m so excited! Very very highly recommended! I immediately a cp batch of 95% shea butter and 5% avocado oil and a few additives and unmolded in less than 12 hours. This is officially my go-to mold. Happy. Happy. Happy.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Shape
• Heft
• Size
|
|
|
|
|
|
Felicia • Pennsylvania
Date Submitted: 09/25/2018
I Recommend This Product!
|
|
"Perfect size and shape bars" |
|
COMMENTS: The cavity size and shape for this mold is perfect for my use. You can make a batch to fill all or only some of the mold. I am new to making CP soap and like to use this mold for a test batch where I can see what a recipe will do without making a ton of bars. As with any silicone based product, if you use fragrance this mold will retain the fragrance. IT WILL NOT effect the next batch of soap. Be sure and fill the cavities with the mold on a level, flat, transportable surface, Once full with soap batter I do not recommend moving the mold without a board or pan underneath until the soap sets (of course).
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• non conventional bar size/unique
• very sturdy, no need for props/supports
|
|
|
|
|
|
Mia • Ohio
Date Submitted: 09/13/2018
I Recommend This Product!
|
|
"Great mold" |
|
COMMENTS: I love that I can make more than one type of soap! I also love the shape!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• indivividual bars
• No cutting
|
|
|
|
|
|
Melanie • United Kingdom
Date Submitted: 07/20/2018
I Recommend This Product!
|
|
"Second to None" |
|
COMMENTS: These crafters choice moulds are superb. They are one of the few moulds purpose built to make soap rather than cakes etc, and so they are actually large enough to produce a decent bar of bath soap. I live in England, and the postage was seamless: it took a week (!) and since the duty was pre-paid, I had no problems with the post office. The lady who contacted me about the order was charming. I can't recommend this firm enough.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Shape. Size. Ease of use.
|
|
• Nothing.
|
|
|
|
Amy • South Carolina
Date Submitted: 07/30/2017
I Recommend This Product!
|
|
"Great!" |
|
COMMENTS: Each cavity is of decent size- each of my bars weighed over 5 oz before curing. They make a nice, solid block of soap which my friends and family seem to find more appealing than the standard "homemade" cut of soap. I don't think it would work for more complicated swirl work, but it's worked great for a basic bar of soap.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP
|
|
|
|
|
Emily • Virginia
Date Submitted: 07/26/2017
I Recommend This Product!
|
|
"Great product" |
|
COMMENTS: This mold is SO sturdy! I use it for both CP and HP most often, but sometimes MP. The MP comes out better, because of the liquid state of the pour. I have an issue with HP leaving large air pockets, but that is the name of the game!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Hot Process
|
|
|
|
|
Lisa • North Carolina
Date Submitted: 07/08/2017
I Recommend This Product!
|
|
"A great mold" |
|
COMMENTS: I love the bars this mold makes. It's a bit larger than a loaf soap bar so the weight will but this gives me more options if I don't want to make a whole loaf of soap and want to try out a few bars in different scents, colors and additions of additives I am wanting to try.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Celeste • Tennessee
Date Submitted: 06/21/2017
I Recommend This Product!
|
 |
"Crafters Choice 15 Cavity Euro Rectangle Silicone" |
|
COMMENTS: Product appears durable and well made. I expect I will be satisfied with its functionality. How well it holds up over time is to be determined.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Ginger • Kentucky
Date Submitted: 05/24/2017
I Recommend This Product!
|
|
"Euro Mold" |
|
COMMENTS: Great!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Gion • Nevada
Date Submitted: 05/05/2017
I Recommend This Product!
|
|
"15 cavity Euro rectangle silicone soap mold 1613" |
|
COMMENTS: I LOVE this soap mold!!! The vars are nice and thick, and the mold releases them easily without a fight. It makes 15, wonderful bars at a time and is perfect to make batches with. The shape is rectangular but the edges are soft and slightly rounded, not sharp and overly pointed. I totally recommend this product for beginning soap makers or an expert. In fact I am planning on getting a second one to boost my batches!!!9
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Freda • Ohio
Date Submitted: 12/02/2016
I Recommend This Product!
|
|
"Excellent investment " |
|
COMMENTS: Love this mold! Great size bars, releases easily.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Mona • Texas
Date Submitted: 11/14/2016
I Recommend This Product!
|
|
"15 cavity mold" |
|
COMMENTS: I cannot rave enough about this mold. I used this for salt bars and was easy to fill, transfer from table to tray and bar release was a breeze.
The info says 72os but this is not weight of oils but 72 oz/9 cups of liquid. It holds, roughly, over 3 lbs of soap.
Will definitely be doing more with these molds man may have to get more for future large batches.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• ease of use
|
|
• nothing
|
|
|
|
karla • Florida
Date Submitted: 10/27/2016
I Recommend This Product!
|
|
"Very good quality" |
|
COMMENTS: Definetly will buy it again. Very good quality
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Julie • Virginia
Date Submitted: 09/23/2016
I Recommend This Product!
|
|
"silicone mold" |
|
COMMENTS: 15 cavity
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• size
• number of molds
• ease of use
|
|
|
|
|
|
Michelle • Missouri
Date Submitted: 09/15/2016
I Recommend This Product!
|
|
"I love this mold!" |
|
COMMENTS: I find this mold to be perfect. Not hard to release soap. I use it to make saltwater soaps that would otherwise be very hard to cut.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Everything
|
|
|
|
|
|
Amber • Washington
Date Submitted: 08/23/2016
I Recommend This Product!
|
|
"Perfect" |
|
COMMENTS: Perfect size for making bars of soap or shampoo bars! Super easy to make a big batch with this mold.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Shampoo Bars
|
|
|
|
|
Teresa • Oregon
Date Submitted: 06/29/2016
I Recommend This Product!
|
|
"Euro Soap Mold" |
|
COMMENTS: I really like this quality mold! The shape of the bars at first glance appear to be small but in reality are a good chunk size that fit nicely in your hand. I had no issues when it came time to unmold and I've received positive comments about the unique shape. It would be wonderful if there was another size option, perhaps a 9 bar mold for those who wish to make an easy to manage small batch. No doubt I will be purchasing more of these molds in the future.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Unique shape
|
|
• Nothing
|
|
|
|
Jamie • Ohio
Date Submitted: 06/19/2016
I Recommend This Product!
|
|
"MP soap" |
|
COMMENTS: I use these for melt and pour soap. Very easily to unmold and easy to clean. I love using this mold and I will probably get a few more soon!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Robin • Ohio
Date Submitted: 05/05/2016
I Recommend This Product!
|
|
"Best Ever" |
|
COMMENTS: I have been dealing with Wholesale
Supplies Plus for over 14 yrs now. I love love love this mold! It makes a very professional looking bar of soap, is easy to use once you get the hang of it. The bars pop right out. Very pleased !
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Teresa • Connecticut
Date Submitted: 01/30/2016
I Recommend This Product!
|
|
"Bars too small" |
|
COMMENTS: I like this mold, but i feel like the bars are too small
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
|
|
• bigger bars
|
|
|
|
Lori • New York
Date Submitted: 01/08/2016
I Recommend This Product!
|
|
"Great but not for me" |
|
COMMENTS: I bought these thinking they were a standard bar size although the soap comes out beautiful and perfect this product was not for me personally.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Deborah • Barbados
Date Submitted: 12/18/2015
I Recommend This Product!
|
|
"Love this mold!" |
|
COMMENTS: This mold is the perfect size for my facial soap bars and salt soap bars. I also use it for my 1lb test batches which make 5 bars. Very sturdy and soap comes out easily.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Donna • Florida
Date Submitted: 12/09/2015
I Recommend This Product!
|
|
"Awesome mold!" |
|
COMMENTS: This mold makes my soap looks like they were cut by a machine, they're easy to unmold and they present professionalism! I will definitely purchase again.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• I like everything about this mold
|
|
|
|
|
|
Ashley • New York
Date Submitted: 10/11/2015
I Recommend This Product!
|
|
"LOVE this mold!" |
|
COMMENTS: This mold is perfect. It releases the soap super easily without any fighting with it. While the mold itself did change a bit color during the process, it DIDNT hold any fragrance which is amazing. Due to that, it doesnt transfer scents from one soap to the other. I will order more of these in the furture for sure. Worth every penny.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Doesnt transfer scent.
• Easy to demold.
|
|
|
|
|
|
Lynne • New Mexico
Date Submitted: 08/07/2015
I Recommend This Product!
|
|
"Nice size and shape" |
|
COMMENTS: Although it's a bit different than the usual bar shapes...I like it and use it exclusively for my shampoo bars...and my soap stamp fits perfectly on it. I would be nice though if this mold came in a smaller quantity of molds, instead of 15 cavities, 8 would be easier to handle.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• size and shape
|
|
• less cavities
|
|
|
|
Mary • California
Date Submitted: 07/27/2015
I Recommend This Product!
|
|
"Silicone mold" |
|
COMMENTS: This makes nice shaped bars. Have to push a bit to unmold. They have very clean edges and look professional.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Agnes • New York
Date Submitted: 07/06/2015
I Recommend This Product!
|
|
"Love this mold!" |
|
COMMENTS: This is a fantastic mold. Easy to unmold, a nice sized bar, somewhat different shape than folks are used to, and 15 soaps at one time! I bought 2 of these during the moving sale...so glad I didn't get just one...they are really worth the money. Highly recommend the Crafter's Choice silicone molds in general, but especially this one.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Fran • Florida
Date Submitted: 07/02/2015
I Recommend This Product!
|
|
"Euro mold (15 bars)" |
|
COMMENTS: I was skeptical at first glance. No way will my soap weigh ~5oz. BUT it did! And the shape of the bars are different. Reviewed other comments and added salt so the bars would harden quicker for easier release (in 2 days). Will definitely use for brine/salt bars. I'm pleased.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP
|
|
|
|
|
Taniece • Florida
Date Submitted: 04/10/2015
I Recommend This Product!
|
|
"Euro mold " |
|
COMMENTS: Will buy again!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Saarene • Pennsylvania
Date Submitted: 04/09/2015
I Recommend This Product!
|
|
"Individual bar mold" |
|
COMMENTS: Makes a nice sized bar. Nice to have an option to form bars instead of fighting with difficult to cut soap recipes.
I have to remember to put it on a tray so that I can move it after I pour the soap, it's too floppy to move safely otherwise.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Bar size
|
|
• Make it more stable to move more easily
|
|
|
|
Alison • Michigan
Date Submitted: 02/22/2015
I Recommend This Product!
|
|
"Love" |
|
COMMENTS: I love this mold...I love the shape of the soaps.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Amy • Kansas
Date Submitted: 02/08/2015
I Recommend This Product!
|
|
"Undecided" |
|
COMMENTS: First, things I love about this:
The size of the bar is perfect. I like being able to have a nice big hunk of soap. I like the proportions, too.
Now, for some caveats.
It is really hard to get CP soap out of the mold. Sometimes, I think a little more rigidity would help with removing the soap. I tried greasing the mold, and it helps somewhat.
I do like this mold, but it is a little unwieldy. I'm sure with experimentation, I'll get it down to a science.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
YTS • Texas
Date Submitted: 01/29/2015
I Recommend This Product!
|
|
"Great different mold" |
|
COMMENTS: I never order this kind and I am finding myself using it for a couple of special soaps ei. "all organic", "all natural". I love it!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP, Soap - Hot Process, Soap - Shampoo Bars, Soap - Shave Shampoo, Lotion Bars & Sticks
|
|
|
|
|
Mark • Wisconsin
Date Submitted: 01/24/2015
I Recommend This Product!
|
|
"15 Cavity Mold" |
|
COMMENTS: I love this mold! Very durable and soaps come out without a problem. The sides of the soap inside the cavities are very shiny too. Perfect size.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Everything
|
|
• non
|
|
|
|
Anthony • West Virginia
Date Submitted: 12/24/2014
I Recommend This Product!
|
|
"Neat and Clean" |
|
COMMENTS: Easy to unmold. Nice clean finish.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Shave Shampoo
|
|
|
|
|
Jennifer • Illinois
Date Submitted: 12/20/2014
I Recommend This Product!
|
|
"Great Size mold" |
|
COMMENTS: This mold is great releases soap with ease. You cant go wrong with this mold.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Gretchen • Virginia
Date Submitted: 10/18/2014
I Recommend This Product!
|
|
"Love it!" |
|
COMMENTS: I LOVE this mold! It is SO easy to use and I love to just push the soap out when I'm done. It's so fun! I've only used it once so I can't yet testify to it's durability, but it seems like it will be around for a while. The only disadvantage I have is that I don't usually make this deep of soap bars, so I don't fill mine all the way up. That makes it a bit more difficult to make consistent sizes. But I still love it!
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP
|
|
|
|
|
Mariluz • Florida
Date Submitted: 09/08/2014
I Recommend This Product!
|
|
"Great" |
|
COMMENTS: Perfect size soap
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
kimberley • New York
Date Submitted: 08/15/2014
I Recommend This Product!
|
|
"I love this mold" |
|
COMMENTS: I wish i ordered more than just one now out of stock.:)Will be def buying more.Very cute bars comes out perfect.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Shampoo Bars, Soap - Shave Shampoo
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
|
|
• nothing
|
|
|
|
Sharon • Nevada
Date Submitted: 08/12/2014
I Recommend This Product!
|
|
"Silicone molds....The way to go... 15 bars at once" |
|
COMMENTS: Cannot say one bad comment on this mold. I filled all 15 cavities with the microwaved soap base and all of the soaps released without one single problem. I have used plastic in the past and decided to purchase 2 silicone molds. Glad that I did. These molds made the soap making process a breeze. Plan to order more silicone molds in the near future.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Shave Shampoo
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Exceptional value for your dollar.
• 30 perfect bars at once without cutting
• Ease of use. They pop right out!
|
|
• Can't think of anything.
|
|
|
| Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information. |
 |
11 Question(s) Shown Below |
| Distributor & Drop Shipper Minimum Advertised Pricing |
As a Crafter’s Choice Distributor and/or Drop Shipper you have agreed to abide by the following Minimum Advertised Price (MAP) for each product and price level. You are permitted to advertise products at a higher price. You may not advertise the products at a lower price. Below you will find the MAP for this product.
|
|
|
|
|
