Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.
Directions:
Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.
Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.
Care:
Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
Average Customer Rating: |
|
(4 Reviews) |
Derek • Missouri
Date Submitted: 05/13/2019
I Recommend This Product!
|
|
"Love" |
COMMENTS: Perfect size and very nice quality!
|
PRODUCT USED IN: Bath Fizzies & Salts
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• everything
|
|
• nothing
|
|
|
Home • Michigan
Date Submitted: 08/23/2018
I Recommend This Product!
|
|
"Great large bar of soap" |
COMMENTS: I made bars of soap for all my friends for 4th of July and these were a big hit. Creates a large substantial bar and if you pour carefully you can alternate red and white colored soaps in the stripe cavities and blue where the stars are. For a plastic mold the soaps come out easy. Just put in the freezer for a couple minutes, turn upside down and apply pressure to create air gaps.
|
PRODUCT USED IN: Soap - Melt & Pour
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• substantial size • can pour stripes and blue star area • fairly easy to release
|
|
|
|
|
Rachelle • Colorado
Date Submitted: 10/19/2016
I Recommend This Product!
|
|
"Flag Mold" |
COMMENTS: This flag is cute for the 4th of July. The soap comes out of the mold nicely. I did the three color red, white, and blue swirl.
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy to use. • Comes out of the mold nicely.
|
|
|
|
|
Victoria • California
Date Submitted: 09/11/2016
I Recommend This Product!
|
|
"American Flag Mold" |
COMMENTS: People love this mold; I use rub on color for it and so far have made it only with a fragrance of Leather which is hugely popular.
|
PRODUCT USED IN: Soap - Melt & Pour
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• popularity with customers • size of bar
|
|
|
|
|
Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information. |
|
0 Question(s) Shown Below |
Distributor & Drop Shipper Minimum Advertised Pricing |
As a Crafter’s Choice Distributor and/or Drop Shipper you have agreed to abide by the following Minimum Advertised Price (MAP) for each product and price level. You are permitted to advertise products at a higher price. You may not advertise the products at a lower price. Below you will find the MAP for this product.
|