|
|
Filigree Bee Soap Mold (MW 01) |
The requested content cannot be found 1 / 4 Filigree Bee Soap Mold (MW 01)
|
|
 |
Additional
Information |
|
Directions &
Ingredients |
|
SDS &
Documents |
|
|
The Filigree Bee Soap Mold features a buzzing bee on a honeycomb, adorned with delicate, ornamental details.
Common Uses:
Melt & Pour Soap. Cold Process Soap. Lotion Bars.
Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC (Not Approved for Food Contact)
Country of Origin: United States
Milky Way Soap Molds can tolerate temperatures of 135-145 degrees F. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling.
Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
Country Of Origin: United States
|  | This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a). |
|
|
International Nomenclature of Cosmetic Ingredients (INCI):
This product does not need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved):
This product does not need to be listed on the product ingredient label.
Directions:
Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.
Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.
Care:
Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
| Average Customer Rating: |
 |
(14 Reviews) |
|
Raven • Wisconsin
Date Submitted: 01/05/2024
I Recommend This Product!
|
 |
"Beautiful detail" |
|
COMMENTS: I love the look of this mold and will continue to use it despite the challenges of demolding the soaps.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Details of the design
|
|
• Easier removal of product
|
|
|
|
Cindy • Tennessee
Date Submitted: 08/18/2018
I Recommend This Product!
|
|
"The bees knees" |
|
COMMENTS: This mold is super cute and works really well with lotion bars. My customers Love the cute design.
|
|
PRODUCT USED IN: Lotion Bars & Sticks
|
|
|
|
|
Rachelle • Colorado
Date Submitted: 05/31/2017
I Recommend This Product!
|
|
"Very Cute!" |
|
COMMENTS: I love the detail on this mold! It is prettier that I thought it would be. Goes well with Honey type Fragrances.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy Release
|
|
|
|
|
|
Adriana • Florida
Date Submitted: 12/06/2016
I Recommend This Product!
|
|
"Bee Mold" |
|
COMMENTS: Very cute mold. I like the details. Doesn't seem to be very sturdy though. I think after a few more times of use it seems like it will crack. Other than that I really like it.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
|
|
• make it silicone
|
|
|
|
Briony • New York
Date Submitted: 12/02/2016
I Recommend This Product!
|
|
"Love it!" |
|
COMMENTS: Love this mold, so easy to pop the soap out. After soap has hardened I pop it in the freezer for 3 minutes & run it under hot water real quick and use both thin a against the back & it pops right out. Love the design & so do my customers.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Lotion Bars & Sticks
|
|
|
|
|
Darla • Kentucky
Date Submitted: 05/12/2016
I Recommend This Product!
|
|
"Gorgeous!" |
|
COMMENTS: This is an absolutely gorgeous mold. For molds per tray. Wish it had 6. Still, it is quite beautiful. Easy to work with. One of my favorite molds.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
|
|
• More molds per tray
|
|
|
|
Ruchelle • South Carolina
Date Submitted: 02/20/2016
I Recommend This Product!
|
|
"High relief" |
|
COMMENTS: This mold is my favorite of 5 my sister gifted me from Wholesale. One of the 4 soap molds within he mold leaks. :(.but I think it will be replaced in my next order. Really pretty resulting soap that is distinctive.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Hig relief
|
|
• One mold leaks
|
|
|
|
Lynne • New Mexico
Date Submitted: 08/07/2015
I Recommend This Product!
|
|
"Awesome design" |
|
COMMENTS: I love this mold and use it exclusively for my honey soaps. Nice details and easy to remove. Just wished it produced a larger size.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• desogn
|
|
• size
|
|
|
|
Ashley • Pennsylvania
Date Submitted: 07/02/2015
I Recommend This Product!
|
|
"Filigree Bee Soap Mold (MW 01) " |
|
COMMENTS: Second time buying this mold. I love it... and, my customer's love it.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Debbie • Missouri
Date Submitted: 09/11/2014
I Recommend This Product!
|
|
"Popular" |
|
COMMENTS: I used this mold with melt & pour soap. I had a little bit of a hard time unmolding the soap, but just put it in the freezer for a little while and the soap then popped right out. Mostly the problem was my impatience. I think you need to let the soap thoroughly set up for at least 24 hours before trying to unmold it. I am pleased with the mold and will use it often for honey-based soaps. The soaps are just the right size to put in small cellophane bags for gifts.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Mona • Alabama
Date Submitted: 08/06/2014
I Recommend This Product!
|
|
"Easy to use" |
|
COMMENTS: Easier than I thought to remove soaps from this mold. I have no idea who long it will last, but so far 3 uses (12 soaps) later and no issues. Will buy again.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Camille • New York
Date Submitted: 06/16/2014
I Recommend This Product!
|
|
"Excellent design!" |
|
COMMENTS: Big, bold, sized right and just what I wanted. Couldn't ask for more with this one.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• big bold design
• size of soap
|
|
|
|
|
|
rachel • Washington
Date Submitted: 12/27/2013
I Recommend This Product!
|
|
"Love these molds!" |
|
COMMENTS: LOVE this. It makes the most gorgeous Lotion Bars and they pop out perfectly!
|
|
PRODUCT USED IN: Lotion Bars & Sticks
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• The size
|
|
|
|
|
|
Emily • Ohio
Date Submitted: 10/30/2013
I Recommend This Product!
|
|
"What a great seller!" |
|
COMMENTS: I poured the bee in white and then used the honey based soap w/o any fragrance and it was a hit! Some folks are allergic to fragrance oils and really appreciate finding something safe to use that brightens up both their bath and kitchen. I "plated" these with some of my small soaps to sell at Autumn show and sold out immediately. Thanks!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Fragrance is wonderful when I am pouring
|
|
|
|
|
| Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information. |
 |
2 Question(s) Shown Below |
| Distributor & Drop Shipper Minimum Advertised Pricing |
As a Crafter’s Choice Distributor and/or Drop Shipper you have agreed to abide by the following Minimum Advertised Price (MAP) for each product and price level. You are permitted to advertise products at a higher price. You may not advertise the products at a lower price. Below you will find the MAP for this product.
|
|
|
|
|
