|
Fleur de Lis Teardrop Guest Soap Mold (MW 86) |
|
|
|
Additional Information |
|
Directions & Ingredients |
|
SDS & Documents |
|
|
Traditionally, the fleur de lis has been used throughout history to represent French royalty, signifying perfection, light, and life. The Guest Fleur de Lis Teardrop Soap Mold features the iconic image in a striking teardrop shape with majestic detail.
Common Uses:
Melt & Pour Soap. Cold Process Soap. Lotion Bars.
Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC (Not Approved for Food Contact)
Country of Origin: United States
Milky Way Soap Molds can tolerate temperatures of 135ºF to145ºF. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling.
Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
Country Of Origin: United States
| | This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a). |
|
|
International Nomenclature of Cosmetic Ingredients (INCI): This product does not need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved): This product does not need to be listed on the product ingredient label.
Directions:
Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.
Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.
Care: Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
Average Customer Rating: |
|
(4 Reviews) |
Dawn • Nevada
Date Submitted: 02/09/2022
|
|
"Super small" |
COMMENTS: This is a gorgeous design but too small even as a hand soap. Please make it in a body bar size... 3.5 to 4.5 oz please! I LOVE the design. Just needs a size up. Also the size it about 1.3 not even close to 2 oz bar.
|
PRODUCT USED IN: Soap - Melt & Pour
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Gorgeous teardrop design • Makes 5 bars!
|
|
• Make it larger so it's actually useful
|
|
|
cortrena • West Virginia
Date Submitted: 11/30/2018
I Recommend This Product!
|
|
"Cute as can be" |
COMMENTS: Ea s to get the product out. Nice detail
|
PRODUCT USED IN: Soap - Melt & Pour, Lotion Bars & Sticks
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Everything
|
|
• Nothing
|
|
|
Our Country Home • Indiana
Date Submitted: 10/30/2015
I Recommend This Product!
|
|
"so cute" |
COMMENTS: I love this mold. The middle one can be tricky to pop out though...the smaller they are the harder I have found in general to pop out of the plastic. These are about 1.50 oz, not 2 oz each.
|
PRODUCT USED IN: Soap - Melt & Pour
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• design
|
|
• make a little larger to full 2 oz • skip putting one in the middle
|
|
|
Ann • Oklahoma
Date Submitted: 12/03/2014
I Recommend This Product!
|
|
"Love this" |
COMMENTS: Finally! A perfect Fleur de Lis guest mold. I've been searching everywhere for one. Great job, as usual!
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information. |
|
1 Question(s) Shown Below |
Distributor & Drop Shipper Minimum Advertised Pricing |
As a Crafter’s Choice Distributor and/or Drop Shipper you have agreed to abide by the following Minimum Advertised Price (MAP) for each product and price level. You are permitted to advertise products at a higher price. You may not advertise the products at a lower price. Below you will find the MAP for this product.
|
|
|
|
|