|
|
Heart Guest Silicone Mold 1612 |
|
|
|
 |
Additional
Information |
|
Directions &
Ingredients |
|
SDS &
Documents |
|
|
Share some soap love with the guest-sized soap hearts created from this silicone mold. We love using this mold for crafting Valentine's Day inspired soaps. Mold comes in a natural semi-translucent color.
Common Uses:
Melt & Pour Soap. Cold & Hot Process Soap.
Points of Interest:
Material: Food Grade Silicone
Maximum Product Pour Temp: 500ºF
Makes (12) Individual Bars
Approximate Bar Weight: 1.25 oz
Measures: 1.75" x 1.75" x .75"
Fits in our 4 x 6 cello and shrink bags!
Country Of Origin: China
|  | This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a). |
|
|
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.
Directions:
Melt & Pour Soap: Pour melted soap into silicone mold cavities. Allow soap to cool at room temperature until hard. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Cold Process Soap: Pour soap at trace into the mold cavities. After at least 24 hours, gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface and gently push on the bottom of mold until the soap starts to release. Grab hold of the soap with a gloved hand, and allow soap to cure for 4-8 weeks. Note that some cold process soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Cold Process/Oven Process Soap: Pour soap at trace into the mold cavities. Preheat oven to 170ºF then place mold in oven. Turn oven off, and keep soap in oven overnight. The next day remove mold from oven. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Allow soap to cure for 2 to 4 weeks.
Hot Process Soap: Scoop hot process soap into mold cavities. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Lotion Bars: Pour melted lotion bar mixture into mold cavities. Allow mixture to solidify. Carefully remove lotion bars from mold by gently pulling the sides away from the lotion bars, and then push on the bottom of the mold until the lotion bars starts to release. Grab hold of lotion bar and carefully pull out of mold.
Care: Hand wash in warm sudsy water.
| Average Customer Rating: |
 |
(29 Reviews) |
|
Shaunel • Michigan
Date Submitted: 02/12/2019
I Recommend This Product!
|
|
"A very nice mold" |
|
COMMENTS: this is a very nice mold i used it for valentines day heart shaped soaps. very nice and sturdy. easy to wash out also
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Dvorak • Maryland
Date Submitted: 05/28/2017
I Recommend This Product!
|
|
"Perfect size " |
|
COMMENTS: Perfect for sample size soap bars or lotion bars
|
|
PRODUCT USED IN: Soap - Cold Process, Lotion Bars & Sticks
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size
• Easy to unmold
|
|
• Nothing
|
|
|
|
Ginger • Kentucky
Date Submitted: 02/13/2017
I Recommend This Product!
|
|
"Heart Mold" |
|
COMMENTS: Very Sturdy!
|
|
PRODUCT USED IN: Bath Fizzies & Salts
|
|
|
|
|
Jessica • California
Date Submitted: 01/17/2017
I Recommend This Product!
|
|
"Sturdy mold" |
|
COMMENTS: A very good quality mold. Not too soft like some silicone molds are. I foresee this lasting a long time.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Bath Fizzies & Salts, Lotion Bars & Sticks
|
|
|
|
|
Milky • Pennsylvania
Date Submitted: 12/08/2016
I Recommend This Product!
|
|
"Super Cute" |
|
COMMENTS: This heart mold is super cute, makes wonderfully shaped and sized heart soaps--or bath bombs--that are very popular due to their shape! Great for shower melts, too.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Susan • Arizona
Date Submitted: 10/28/2016
I Recommend This Product!
|
|
"Cute and sturdy!" |
|
COMMENTS: Adorable little heart mold. Have ordered some other molds online and they are flimsy and unstable at holding their shape. I'm sticking to Crafter's Choice molds from now on.
|
|
PRODUCT USED IN: Bath Fizzies & Salts
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Sturdy and perfect size for bath fizzles
|
|
|
|
|
|
linda • California
Date Submitted: 06/14/2016
I Recommend This Product!
|
|
"HEART GUEST SILICONE MOLD 1612" |
|
COMMENTS: Love this mold,perfect size for guests. I have tried other guest soaps but this is the perfect size!
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Mary • Washington
Date Submitted: 06/06/2016
I Recommend This Product!
|
|
"Silicone Guest Heart mold" |
|
COMMENTS: Great for sample size soaps and great for lotion bars, we even did bath bombs in these and they came out great
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP, Soap - Shampoo Bars, Lotion Bars & Sticks
|
|
|
|
|
Elizabeth • California
Date Submitted: 04/07/2016
I Recommend This Product!
|
|
"heart guest silicine mold" |
|
COMMENTS: This is my work horse. I love all the guest size molds. They clean well. They unmold well. I love this mold.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Bath Fizzies & Salts, Exfoliants & Sugar Scrubs, Lotion Bars & Sticks, Candles - Soy
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• soft
• versatile
• size
|
|
|
|
|
|
Laura • Virginia
Date Submitted: 02/17/2016
I Recommend This Product!
|
 |
"silicone heart mold " |
|
COMMENTS: This mold was bigger than I expected. I used it to create my heart shaped fizzies. Over all I liked the mold but will probably order another so I can make more and be more patient while my fizzies dry.
|
|
PRODUCT USED IN: Bath Fizzies & Salts
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• large and thick in size
|
|
|
|
|
|
Janice • New Jersey
Date Submitted: 02/11/2016
I Recommend This Product!
|
|
"Perfect" |
|
COMMENTS: I often have a small amount of batter left over and this mold is perfect to put it to good use. I dislike waste. Easy to unmold the soap
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Perfect size
• Unmolds easy
|
|
• None
|
|
|
|
Pamela • Ohio
Date Submitted: 02/06/2016
I Recommend This Product!
|
|
"great mold" |
|
COMMENTS: I use the mold to make jelly soap for Valentines Day for my kids. They were a hit. Will use it for favors, bath fizzies, truffles, etc.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Bath Fizzies & Salts
|
|
|
|
|
Sean • Iowa
Date Submitted: 01/19/2016
I Recommend This Product!
|
|
"mmmm, i love hearts" |
|
COMMENTS: I love anything hearts and couldn't resist when I saw this mold. I am glad I bought it.
|
|
PRODUCT USED IN: Bath Fizzies & Salts
|
|
|
|
|
Joan • Nevada
Date Submitted: 01/09/2016
I Recommend This Product!
|
|
"fizzies" |
|
COMMENTS: Like this mold for my fizzies and melt and pour soaps
|
|
PRODUCT USED IN: Bath Fizzies & Salts
|
|
|
|
|
cassie • Indiana
Date Submitted: 12/22/2015
I Recommend This Product!
|
|
"Like this mold" |
|
COMMENTS: I used this mold to make Debbie's favorite heart shaped bath fizzies with the Pink Sugar scent. The first time I used the mold, they popped right out. The second time, they crumbled while I was working them out of the mold. I put the mix back in the bowl and sprayed with more rubbing alcohol and put back in the mold. They came out fine. Just have to make sure that you have enough moisture for them to set up properly. Will probably order another mold so I can make these fizzies twice as fast.
|
|
PRODUCT USED IN: Bath Fizzies & Salts
|
|
|
|
|
YTS • Texas
Date Submitted: 06/01/2015
I Recommend This Product!
|
|
"Great Molds! " |
|
COMMENTS: Great Molds! I absolutely love all the Crafters Choice molds. They last, don't bow, easy to clean, and even safe in the oven!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP, Soap - Hot Process, Soap - Shampoo Bars, Soap - Shave Shampoo, Bath Fizzies & Salts, Exfoliants & Sugar Scrubs, Lotion Bars & Sticks
|
|
|
|
|
Linda • North Carolina
Date Submitted: 11/24/2014
I Recommend This Product!
|
|
"Love this mold" |
|
COMMENTS: This heart shape mold is a must have for me. I have made wedding favors, soaps, lotion bars, and bath fizzies with great success. The heart shape makes a very nice product. The silicone mold is easy to use and to remove your product from it. This mold seems to be holding up well after a number of uses.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Bath Fizzies & Salts, Lotion Bars & Sticks
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Perfect size for products
• Good quality and works well
|
|
|
|
|
|
Judd • California
Date Submitted: 09/21/2014
I Recommend This Product!
|
|
"High quality, High Gloss, Perfect Size" |
|
COMMENTS: The gloss on these molds makes popping out products very easy and the cavities are small and cute but not too small. Perfect for embeds and gifts so it comes in quite useful when you craft a lot. Still no tears after many different batches just like all the other molds as long as you don't peel the corners back it wont break. I just hope these don't go out of stock, sometimes Crafters Choice can take months to restock molds if they even do make more. Take advantage of these while you can.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Bath Fizzies & Salts, Exfoliants & Sugar Scrubs, Lotion Bars & Sticks
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Gloss
• Durability
• Thickness to prevent bowing
|
|
• Nothing
|
|
|
|
Katy • North Carolina
Date Submitted: 09/09/2014
I Recommend This Product!
|
|
"classic small heart mold, must have" |
|
COMMENTS: good size for guest soaps and bath fizzies. not too big and not too small.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Bath Fizzies & Salts, Lotion Bars & Sticks
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• nice size
|
|
• nothing
|
|
|
|
Chanda • Missouri
Date Submitted: 09/06/2014
I Recommend This Product!
|
|
"well used & loved!" |
|
COMMENTS: versatile uses with the ease of easy removing & washing of silicone!Just the right size for samples & many other things!!!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Bath Fizzies & Salts, Lotion Bars & Sticks
|
|
|
|
|
skipcat • Idaho
Date Submitted: 08/11/2014
I Recommend This Product!
|
|
"The PERFECT Size!" |
|
COMMENTS: This silicon mold makes a perfect gift-sized lotion bar! Just for reference, I filled the molds all the way to the top and the completed lotion bars came out to be about 1.5" tall and 2" across.
Fuctionality-wise, it releases products very easily and was no problem to clean.
|
|
PRODUCT USED IN: Lotion Bars & Sticks
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size
• Easy-release
• Easy to clean
|
|
|
|
|
|
julie • North Carolina
Date Submitted: 07/17/2014
I Recommend This Product!
|
|
"Good Size" |
|
COMMENTS: This product is a quality soap mold which I use for making wedding favors. It is the perfect size . . .not too big and not too small.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Judy • Pennsylvania
Date Submitted: 04/09/2014
I Recommend This Product!
|
|
"heart shaped tarts" |
|
COMMENTS: I love this mold for my soy wax melts. I package 3 in a bag since they are 1 ounce each. Have been selling a lot of these. Very easy to unmold and clean.
|
|
PRODUCT USED IN: Candles - Soy
|
|
|
|
|
Marie • South Dakota
Date Submitted: 03/18/2014
I Recommend This Product!
|
|
"Just the right size" |
|
COMMENTS: I am using this mold to make gold and purple hearts. I will be adding it to the top of pastel lavender and pastel yellow melt and pour. I fill the mold halfway. Makes the perfect size for an embed in the top of my loaf mold.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Well made
• Size
• Hearts are easy to remove from mold
|
|
• nothing
|
|
|
|
Judy • Illinois
Date Submitted: 02/13/2014
I Recommend This Product!
|
|
"Makes the prettiest little hearts!" |
|
COMMENTS: Used this mold to make the most perfect little hearts! Can use all year round, not just for Valentine's Day - releases easily!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
DENISE • Virginia
Date Submitted: 02/13/2014
I Recommend This Product!
|
|
"Perfect time of the year!" |
|
COMMENTS: This mold makes wonderful heart shaped soaps. Soaps form in mold and release easily.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy to use!
|
|
|
|
|
|
Patsy • Texas
Date Submitted: 01/16/2014
I Recommend This Product!
|
|
"Crafters Choice™ Heart - Guest - GLOSSY Silicone M" |
|
COMMENTS: These are so cute and so easy on releasing your soap.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• How cute they are
• How easy they release your soaps.
|
|
|
|
|
|
Adrienne • California
Date Submitted: 11/11/2013
I Recommend This Product!
|
|
"Great Mold" |
|
COMMENTS: Used this for bath fizzies and wax tarts. Held up well and both items popped right out.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Bath Fizzies & Salts, Candles - Paraffin
|
|
|
|
|
Michelle • Oregon
Date Submitted: 09/11/2013
I Recommend This Product!
|
|
"Heart works nicely" |
|
COMMENTS: I use these molds to make soaps and bath fizzies and they work so easily. I like that I can make a few at a time or a whole bunch at once with me making custom orders on everything it makes my job easier.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Bath Fizzies & Salts
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• nice in size
• perfect heart
• easy to use
|
|
|
|
|
| Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information. |
 |
2 Question(s) Shown Below |
| Distributor & Drop Shipper Minimum Advertised Pricing |
As a Crafter’s Choice Distributor and/or Drop Shipper you have agreed to abide by the following Minimum Advertised Price (MAP) for each product and price level. You are permitted to advertise products at a higher price. You may not advertise the products at a lower price. Below you will find the MAP for this product.
|
|
|
|
|
