Heart Mini Column Silicone Soap Mold 2014

International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Directions:
Melt & Pour Soap: Close the mold by firmly pressing the edges together. Stand the mold in a sturdy measuring cup. Slowly pour melted soap into mold, and allow soap to harden. Open mold and remove soap. Trim edges with a potato peeler or spatula. Embed mini column into a loaf. Embed multiple mini columns for a unique design.

Cold Process Soap: Close the mold by firmly pressing the edges together. Stand the mold in a sturdy measuring cup. Slowly pour traced soap into mold. After at least 24 hours, open mold and remove soap with gloved hands. Trim edges with a potato peeler or spatula. Embed soap into a loaf. Allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Care: Hand wash mold in warm, sudsy water.

   • Non-Hazardous Statement
   • Animal Testing Statement

Average Customer Rating:

(24 Reviews)

PRODUCT REVIEWS

Pamela • Virginia Date Submitted:  07/03/2024 I Recommend This Product!

"Works well" COMMENTS:  Tiny heart mold that is perfectly sized. Snaps together easily. PRODUCT USED IN:   Soap - Melt & Pour THINGS I LIKE   THINGS I'D LIKE TO CHANGE • Ease of use • Size

Donna • Florida Date Submitted:  06/25/2020 I Recommend This Product!

"love it" COMMENTS:  Makes perfect little heart columns PRODUCT USED IN:   Soap - Cold Process

Mary • New Mexico Date Submitted:  12/28/2018 I Recommend This Product!

"Super cute!" COMMENTS:  This mini heart column mold makes tiny hearts when cut up, they're about the size of a dime. Great for embeds! PRODUCT USED IN:   Soap - Melt & Pour THINGS I LIKE   THINGS I'D LIKE TO CHANGE • Tiny heart embeds • I wish it was longer!

Kari • New Mexico Date Submitted:  02/05/2018 I Recommend This Product!

"Tiny Hearts" COMMENTS:  Working great for embeds. This is tiny so if you want something larger go with the larger one. Otherwise this is a great product. PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process, Bath Fizzies & Salts THINGS I LIKE   THINGS I'D LIKE TO CHANGE • Seals great • Could be longer

Lisa • North Carolina Date Submitted:  02/03/2018 I Recommend This Product!

"Valentines" COMMENTS:  I enjoyed the ease of this mold. It did require a bit of a clean up on the edges from a little leaking under the closure but a simple knife down the seam was easy. PRODUCT USED IN:   Soap - Melt & Pour

Dr Kem  • Pennsylvania Date Submitted:  09/04/2017 I Recommend This Product!

"Great Mold!" COMMENTS:  Love this handy mold for embeds. PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process

SoapBunny • Peru Date Submitted:  05/30/2017 I Recommend This Product!

"excellent buy!!!" COMMENTS:  This mold is very necessary and super practical. The price is pretty good also. It is very useful to start practicing how to embedded objects. PRODUCT USED IN:   Soap - Melt & Pour

Shirley • Pennsylvania Date Submitted:  11/22/2016 I Recommend This Product!

"Easy to use" COMMENTS:  I used for embeds in my melt and pour and CP soaps. Very easy to use. PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process

Kathleen • Ohio Date Submitted:  09/23/2016

"Super small" COMMENTS:  I had been so excited to receive this product, but I was disappointed in the size. It really is mini size. It's dimentions are true to size I just hadn't realized how small they were. I have used it to make single use hand soaps and that works well. I would definitely recommend buying the larger size heart column though if you are intending to make average size soap bars. PRODUCT USED IN:   Soap - Melt & Pour

Donna • Florida Date Submitted:  09/08/2016 I Recommend This Product!

"so pretty" COMMENTS:  I made my heart mold with melt and pour and made several to put into a white base melt and pour in a short tall and skinny mold. They fit perfectly with out having to cut them at all. The silicone mold is great. No difficulty using the mold at all. It works well and doesnt leak at all. Great mold, i got to buy more of them. This is a small, petite heart mold. Works great. And looked fabulous in my soap, everyone just loved it. PRODUCT USED IN:   Soap - Melt & Pour THINGS I LIKE   THINGS I'D LIKE TO CHANGE • Its a heart!!

Tami • California Date Submitted:  08/08/2016

"Little Heart" COMMENTS:  I really do love the silicone molds but honestly this one I think may be defective...The heart shape so far has not lined up quite right and its very very small...I'm kinda disappointed in this one. PRODUCT USED IN:   Soap - Melt & Pour

Caroline • New York Date Submitted:  05/14/2016 I Recommend This Product!

"Easy to use, great mold!" COMMENTS:  I love this mold, it is easy to use and came out perfect with little effort! What more could you ask for? :-) Everyone loved the look of my finished soap with this mold, Wonderful product, I recommend it! PRODUCT USED IN:   Soap - Melt & Pour THINGS I LIKE   THINGS I'D LIKE TO CHANGE • Easy use, perfect heart every time. • Nothing

Ruby • Kentucky Date Submitted:  03/01/2016 I Recommend This Product!

"Very cute!" COMMENTS:  This tiny heart is very cute! The mold is easy to put together, and take apart. Also very easy to clean! PRODUCT USED IN:   Soap - Melt & Pour

Gail • North Carolina Date Submitted:  02/27/2016 I Recommend This Product!

"Hidden in the Hearts" COMMENTS:  I adore this mold. I have made many hearts and have colored them different colors and added them to a white base CP soap. Just amazing. I have also used the LS M&P and added those to a white base CP.. another beautiful saop! PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process THINGS I LIKE   THINGS I'D LIKE TO CHANGE • Love the thickness of the silicone • Stands up nicely in a glass • Easy to remove soap and no leaking!! • Not a thing!

Anne • North Carolina Date Submitted:  01/30/2016 I Recommend This Product!

"Tiny, but cute" COMMENTS:  I use this mold to embed hearts in a couple of my soaps. It ends up being a great size and the soaps sell great. My only issue is that you have to use binder clips to keep the mold closed when you pour in the soap and while it cures. PRODUCT USED IN:   Soap - Cold Process

Iris • Florida Date Submitted:  01/27/2016 I Recommend This Product!

"Very good mold" COMMENTS:  I use this mold for embed mini heart in my soap CP. The best way it works is using a formula that harden very well then the shape will be well defined. PRODUCT USED IN:   Soap - Cold Process

YTS • Texas Date Submitted:  08/16/2015 I Recommend This Product!

"I love these molds!" COMMENTS:  I love these molds! PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP

CarolAnn • New Mexico Date Submitted:  08/13/2015 I Recommend This Product!

"Heart Mini Column Mold" COMMENTS:  This is a very cute mold. Makes adorable little hearts. Extremely easy to use. Let it cool and if unsure you can put it in the freezer for a few minutes after cooling. Slice your little hearts to the size you want. Washes up very easily with warm water. Try the next size up for larger hearts as well. These column molds are terrific. They last for years. Excellent quality and value PRODUCT USED IN:   Soap - Cold Process, Lotion Bars & Sticks THINGS I LIKE   THINGS I'D LIKE TO CHANGE • Ease of use and washing.

Debbie • Missouri Date Submitted:  07/07/2015 I Recommend This Product!

"Great for embeds" COMMENTS:  I use this to make embeds for my cp soap. The mold holds up well, and there is no problem unmolding the soap. Embeds are small enough to use in guest-size soaps for wedding favors. PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process

Tia • Ohio Date Submitted:  06/15/2015 I Recommend This Product!

"Nice size" COMMENTS:  This mold fit together well, and I had no need for rubberbanding it. I would use it again. Liked results. PRODUCT USED IN:   Soap - Melt & Pour THINGS I LIKE   THINGS I'D LIKE TO CHANGE • easy to use

Kirsten • Indiana Date Submitted:  05/03/2015 I Recommend This Product!

"So far my favorite mold EVER!!" COMMENTS:  I have used this mold to make inbeds over and over since I got it. I have a few other in beds, but now I have enough heart sticks to make at least 5 3lb loaves of soap! I have made them in all colors, some with glitter, some transluscent, some solid colors! I love, love, love it! Why are the other small column molds not out yet though??? I am dying for a couple of more shapes????? CC Response: We are just waiting for the final inspection and testing to be done...stay tuned! They should be released soon. PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process THINGS I LIKE   THINGS I'D LIKE TO CHANGE • size is just right • snaps together well and avoids leaking • made from solid, substantial material • pressure your suppliers about others!!

Tosha • Utah Date Submitted:  03/13/2015 I Recommend This Product!

"Great Mold" COMMENTS:  I love this little heart mold. It is perfect for making little hearts of course to put in to soap later on. I can see I am going to have loads of fun with it. PRODUCT USED IN:   Soap - Cold Process THINGS I LIKE   THINGS I'D LIKE TO CHANGE • Ease of use • Ease of cleaning it

michele • Nevada Date Submitted:  02/27/2015 I Recommend This Product!

"Great little mould " COMMENTS:  When this first came I thought " oh no, it's REAL tiny!" It's going to take forever to make my embeds. I was wrong. Dead wrong. Yes it holds just shy of an ounce but I can fill it & put it in the freezer for a minute maybe 3 max if I poured really hot and I can take the little guy out. There is a bit of cleanup but it's very easy. The mold is ready to go in a few seconds again. I did a rainbow progression roygbiv style just changing colors and by adding the next colour in progression to what was left over in my heating cup. Blasted thru it quickly. By the time I cut more mp & mixed in color the mold was ready to come out give or take. Even if you take it out a little wiggly it's small enough to easily lay straight. I want all of these little guys, like right now!!! PRODUCT USED IN:   Soap - Melt & Pour THINGS I LIKE   THINGS I'D LIKE TO CHANGE • Small • Seals well • Holds MP even when pretty hot • Could be a few inches longer

Shana • Alabama Date Submitted:  02/26/2015 I Recommend This Product!

"Super Cute" COMMENTS:  This is just the cutest little mold! I'm using it to make embeds out of melt n pour soap to put in cp soap and they came out very good. My only complaint is the alignment; it's just a little off but not a major issue. PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process THINGS I LIKE   THINGS I'D LIKE TO CHANGE • So cute • Better alignment

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.
	6 Question(s) Shown Below

CC Questions And Answers

"I favor using the hot process method of soap making but occasionally will do CP for specialty molded soaps. Is there a reason why I couldn't use cp in this mold and then embed the whole thing in a HP loaf? I have searched and don't see any information about this subject. Thank you" Click Here To View 1 answer(s) Posted By: Tammy   |   March 24, 2022 Email Me When This Question Gets Answered

Staff Answer This is something you can do!   Posted By: WSP Staff   |   Date: April 01, 2022 Was this answer helpful? Yes | No

---

"The dimensions under the additional information are misleading and erroneous. Is the mold capacity truly only .9 oz. ? .9 oz. is extremely small even for a “mini” column mold. Is this a volume or weight measurement?" Click Here To View 1 answer(s) Posted By: Kerstin   |   November 08, 2020 Email Me When This Question Gets Answered

Staff Answer That is a weighted measure using melt & pour soap. We just retested and we were able to fill the mold with 0.95 oz of detergent free oatmeal soap. These are mini column molds.   Posted By: WSP Staff   |   Date: November 09, 2020 Was this answer helpful? Yes | No

---

"Does this mold need to be filled in thirds or layers to prevent bowing? " Click Here To View 1 answer(s) Posted By: Ila   |   April 19, 2019 Email Me When This Question Gets Answered

Staff Answer Yes, this method will help to prevent bowing, in addition to pouring at lower temperatures.   Posted By: WSP Staff   |   Date: April 22, 2019 Was this answer helpful? Yes | No

---

"I've checked and double checked the dimensions, but I still don't see how long the entire mold is. Is it 8" long so that one column of soap from this mold fits exactly into a 1501 loaf mold? I think you could make the description a little more detailed. Thanks!" Click Here To View 1 answer(s) Posted By: Cindy   |   February 03, 2017 Email Me When This Question Gets Answered

Staff Answer Yes, all of the column molds are designed to fit into the 1501 loaf mold. They may to be trimmed slightly but they are made to fit snuggly into the silicone loaf mold. We will add additional information to our description so this is more understandable. Thanks for bringing to our attention.   Posted By: WSP Staff   |   Date: February 14, 2017 Was this answer helpful? Yes | No

---

"Are these small enough that you could make these hearts and fit them into the LARGER heart mold as imbeds in that mold? Could three of the mini column hearts fit in the larger column heart mold? Thank you." Click Here To View 1 answer(s) Posted By: MLVM   |   February 21, 2016 Email Me When This Question Gets Answered

Staff Answer Yes three of the Heart Mini Column Silicone Soap Mold 2014 hearts would fit easily inside of our Heart Column Silicone Soap Mold 2001.   Posted By: WSP Staff   |   Date: February 23, 2016 Was this answer helpful? Yes | No

---

"What is the dimension of this mold? How many ounces does it hold?" Click Here To View 1 answer(s) Posted By: Christopher   |   February 17, 2015 Email Me When This Question Gets Answered

Staff Answer The dimensions have been added to the Additional information page for this product on our website. This mold will hold 0.9oz by weight.   Posted By: WSP Staff   |   Date: February 19, 2015 Was this answer helpful? Yes | No