International Nomenclature of Cosmetic Ingredients (INCI):
This product does not need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved):
This product does not need to be listed on the product ingredient label.
Directions:
Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.
Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.
Care:
Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
| Average Customer Rating: |
 |
(9 Reviews) |
|
Charlene • Minnesota
Date Submitted: 01/03/2022
|
 |
"Not recommended for Melt and Pour" |
|
COMMENTS: I bought this for MP soap using crafters choice. Its almost impossible to get the soap out. Tried using it for CP soap with the samp issue. Might be good for bathbombs.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Its cute
|
|
• Everything else
|
|
|
|
Eric4Hemp • Alabama
Date Submitted: 02/14/2019
I Recommend This Product!
|
 |
"Love this mold" |
|
COMMENTS: At first it seemed a little hard to get the soap out of the mold, but firm pressure on the back and it pops right out. Love the shape. My customers love it as well.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Theresa • Tennessee
Date Submitted: 05/30/2018
I Recommend This Product!
|
|
"Very Different" |
|
COMMENTS: Works well
|
|
PRODUCT USED IN: Soap - Cold Process, Bath Fizzies & Salts
|
|
|
|
|
cheryl • Missouri
Date Submitted: 02/23/2018
I Recommend This Product!
|
|
"Hemp oil soap" |
|
COMMENTS: I love this mold. Crisp and clear image and makes a nice round bar.now I need another mold I sold out of my hemp and patchouli before I got my soap to the shop.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Nice bar
• Clear image
|
|
• Make a more cavity mold
|
|
|
|
Ginger • Kentucky
Date Submitted: 02/06/2018
I Recommend This Product!
|
|
"Hemp Mold" |
|
COMMENTS: Great
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Joanne • Kentucky
Date Submitted: 12/07/2017
I Recommend This Product!
|
|
"Love the turn out" |
|
COMMENTS: I was not sure how this would be welcomed by customers. But I gave it a shot and I can't keep the soaps made with mold on the shelf. I wish I got two!!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Kathleen • Oregon
Date Submitted: 07/27/2017
I Recommend This Product!
|
|
"Perfect" |
|
COMMENTS: I ordered this mold to obviously make the hemp oil soap bars and it is just the right size and the detail comes out sharp & clean. The reason it received 4 stars is the bars didn't release from the mold quite as
easy ad I had hoped, but upon releasing the bar was good and like I mentioned the detail was sharp.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Detail comes out well defined
• makes good size bar approx 4.7 oz
|
|
|
|
|
|
Joanna • Pennsylvania
Date Submitted: 04/23/2017
I Recommend This Product!
|
|
"Great hemp mold" |
|
COMMENTS: This mold is great! I will have to order a couple more, the cavities are bigger than I expected!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Sharine • Kentucky
Date Submitted: 07/08/2016
I Recommend This Product!
|
|
"Hemp Oil Mold" |
|
COMMENTS: Love this mold! Very detailed & easy to use.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Lotion Bars & Sticks
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Highly detailed
• Cavity size
• Durability
|
|
• NOTHING
|
|
|
| Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information. |
 |
1 Question(s) Shown Below |
| Distributor & Drop Shipper Minimum Advertised Pricing |
As a Crafter’s Choice Distributor and/or Drop Shipper you have agreed to abide by the following Minimum Advertised Price (MAP) for each product and price level. You are permitted to advertise products at a higher price. You may not advertise the products at a lower price. Below you will find the MAP for this product.
|
