|
|
Hibiscus Soap Mold Tray (MW 150) |
|
|
|
 |
Additional
Information |
|
Directions &
Ingredients |
|
SDS &
Documents |
|
|
Known for its showy flowers that can grow to 10", the hibiscus (or mallow) plant is treasured for its ability to attract butterflies, hummingbirds, and bees. The hibiscus is also the flower of Kali, Hindu goddess of Time and Change.
Common Uses:
Melt & Pour Soap. Cold Process Soap. Lotion Bars.
Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC Plastic (Not Approved for Food Contact)
Country of Origin: United States
Milky Way Soap Molds can tolerate temperatures of 135ºF to145ºF. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling.
Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
Country Of Origin: United States
|  | This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a). |
|
|
International Nomenclature of Cosmetic Ingredients (INCI):
This product does not need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved):
This product does not need to be listed on the product ingredient label.
Directions:
Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold, and slice into bars. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.
Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Slice into bars. Allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Lotion Bars: Pour melted lotion bar mixture into mold at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold. Slice into lotion bars.
Care:
Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
| Average Customer Rating: |
 |
(10 Reviews) |
|
Theresa • Tennessee
Date Submitted: 10/24/2024
I Recommend This Product!
|
|
"Nice" |
|
COMMENTS: Another nice,easy to use mold that makes slicing easy.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Lori • New Jersey
Date Submitted: 05/07/2024
|
 |
"Does NOT make individual bars! Not a 6 cavity mold" |
|
COMMENTS: BUYER BEWARE! This is one mass-sized block that you have to cut yourself. It is NOT 6 cavities of individual bars. Furthermore, the edge on one size of the bar is angled making it impossible to have the other sides hand cut to look the same. This should be much more specified or not even sold at all. A total waste of money and I am so disappointed! Look at the reviews. I am not the only one who feels this way. I bought another mass one bar mold here that clearly looked like 6 cavities and left the same poor review.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Mary • Florida
Date Submitted: 03/08/2024
|
 |
"Hibiscus Mold " |
|
COMMENTS: I didn’t understand when I purchased this mold that the 6 bars would be one large block of soap that had to be cut into individual bars. The flowers are pretty but I would have preferred to make them individually so that I could make different colors and scents. This is my mistake having never purchased a solid mold before. I also learned I prefer a silicone mold over a plastic mold. It is much easier to remove the soap from silicone.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Flower design
|
|
• Separated bars
• Silicone instead of plastic.
|
|
|
|
Amanda • Michigan
Date Submitted: 06/07/2019
I Recommend This Product!
|
 |
"Waiting to use" |
|
COMMENTS: I bought this when it was 50% off because it was so cute! I plan on making hibiscus tea soaps with it. I haven’t used it yet, but its really cute and seems study just like the rest of my Milky Way molds. Will update when I use it.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Cute
• Seems sturdy
• Has cut lines
|
|
|
|
|
|
Catherine • California
Date Submitted: 12/13/2016
I Recommend This Product!
|
|
"Perfect!" |
|
COMMENTS: Gorgeous, as always with Milky Way. Detail, artistry, strength, ease-of-use. Milky way is the best!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
|
|
• I'd prefer bigger bars
|
|
|
|
Mary • Nevada
Date Submitted: 08/22/2015
I Recommend This Product!
|
|
"Hbiscus Mold" |
|
COMMENTS: Lovely mold. Makes a beautiful soap bar.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
|
|
• Nothing
|
|
|
|
Lynne • New Mexico
Date Submitted: 08/07/2015
I Recommend This Product!
|
|
"Beautiful mold" |
|
COMMENTS: This is another beautiful soap mold that's very detailed and the finished product is gorgeous.
I would love to see this done as individual modls instead of a tray mold.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• details
|
|
• would individual molds not tray
|
|
|
|
Leah • Kentucky
Date Submitted: 12/30/2014
I Recommend This Product!
|
|
"Easy to get soap from molds!" |
|
COMMENTS: I have worked with quite a few tray molds in the past and this was one of the easiest I have ever had with getting your soap out. No warming required. Maybe this was just the batches I worked with but I am in love with this mold. The designs are so crisp. Once you cut the bars you can barely tell that was from a tray and not individual cells. This saves so much time getting 6 bars from a mold rather than the typical 3-4 you would get from an individual cell mold of equal quality.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
veronica • Texas
Date Submitted: 10/08/2014
I Recommend This Product!
|
|
"Beautiful mold" |
|
COMMENTS: Beautiful mold. I used this mold to make my mom some soap. She likes it so much she wont use the soap. Mold releases very easy.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Maria • Pennsylvania
Date Submitted: 06/25/2014
I Recommend This Product!
|
|
"Lovely & Delicate " |
|
COMMENTS: Makes beautiful soaps which for this being a hard plastic comes out with a breeze,...no complains with this mold.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• pops soap right out
• Makes Nice Soaps
• perfect soap size
|
|
|
|
|
| Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information. |
 |
0 Question(s) Shown Below |
| Distributor & Drop Shipper Minimum Advertised Pricing |
As a Crafter’s Choice Distributor and/or Drop Shipper you have agreed to abide by the following Minimum Advertised Price (MAP) for each product and price level. You are permitted to advertise products at a higher price. You may not advertise the products at a lower price. Below you will find the MAP for this product.
|
|
|
|
|
