|
Honeycomb Loaf Silicone Mold 1506 |
|
|
|
Additional Information |
|
Directions & Ingredients |
|
SDS & Documents |
|
|
Create a honeycomb design on the top of your soap bars with this silicone mold! You can save your bubble wrap for packaging the cute honey inspired soaps you'll create with this mold. The depth of the honeycomb design is roughly 1/8".
Common Uses:
Melt & Pour Soap (MP). Cold Process Soap (CP). Cold Process Oven Process Soap (CPOP). Hot Process Soap (HP).
Points of Interest:
Maximum Temperature: 500ºF
Manufacturer: Crafter’s Choice®
Material: Silicone
Country of Origin: China
Country Of Origin: China
| | This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a). |
|
|
International Nomenclature of Cosmetic Ingredients (INCI): This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved): This product does need to be listed on the product ingredient label.
Directions:
Melt & Pour Soap: Pour melted soap into silicone mold. Allow soap to cool at room temperature until hard. Carefully remove loaf from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the loaf and carefully pull out of the mold. Slice into bars.
Cold Process Soap: Pour soap at trace into mold. After at least 24 hours, gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface or cookie sheet and gently push on the bottom of mold until the soap starts to release. Grab hold of the loaf with a gloved hand. Slice into bars and allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Cold Process/Oven Process Soap: Pour soap at trace into the mold. Preheat oven to 170ºF then place mold in oven. Turn oven off, and keep soap in oven overnight. The next day remove mold from oven. Carefully remove loaf from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Slice into bars, and allow soap to cure for 2 to 4 weeks.
Hot Process Soap: Scoop hot process soap into mold. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Carefully remove loaf from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the loaf and carefully pull out of mold. Slice into bars.
Care: Hand wash mold in warm, sudsy water.
Average Customer Rating: |
|
(17 Reviews) |
Krystal • Ohio
Date Submitted: 07/07/2020
I Recommend This Product!
|
|
"signature " |
COMMENTS: my company is called the salty hive so this is perfect for my signature scented honey ale soaps! i own 2 of them and plan on getting a couple more for larger batches!
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
Dawn • Texas
Date Submitted: 11/02/2019
I Recommend This Product!
|
|
"Crafters Choice Honeycomb Loaf Silicone Mold" |
COMMENTS: I really like this mold. It was so easy to get the soap out of and the honeycomb on top looks awesome.
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
Tracy • Massachusetts
Date Submitted: 02/03/2019
I Recommend This Product!
|
|
"Love it" |
COMMENTS: I really like this mold and I anticipate that this soap will be an excellent seller
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
Lesa • Missouri
Date Submitted: 06/14/2018
|
|
"will not buy again" |
COMMENTS: the honeycomb is really tiny
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Hot Process
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• nothing
|
|
• make honeycomb bigger
|
|
|
Theresa • Tennessee
Date Submitted: 04/28/2018
I Recommend This Product!
|
|
"Love it" |
COMMENTS: I love this one,it come out of the mold very easy.
|
PRODUCT USED IN: Soap - Cold Process
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• The shape
|
|
• Nothing
|
|
|
Dawn • California
Date Submitted: 04/15/2018
I Recommend This Product!
|
|
"love this honeycomb mold" |
COMMENTS: I just got this mold and used it in my honey and oat CP soap recipe. It turned out so nice! I love the honeycomb design and it was super easy to unmold. I'm dreaming of a bumble bee column mold to put down the center of this one. Wouldn't that be so perfect in the honey soap? The mold is very sturdy and holds it's shape great. The bars are nice and big. It makes me very happy.
|
PRODUCT USED IN: Soap - Cold Process
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• the honeycomb motiff • easy to use • sturdy and nice
|
|
• nothing
|
|
|
Tracy • Ontario
Date Submitted: 03/25/2018
I Recommend This Product!
|
|
"I love Love Love this soap mold!" |
COMMENTS: I use this for co soap and love the final look of my soaps.
|
PRODUCT USED IN: Soap - Cold Process
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Quality
|
|
• Nothing
|
|
|
patti • Pennsylvania
Date Submitted: 03/16/2018
I Recommend This Product!
|
|
"perfect top" |
COMMENTS: works great with my Oats and Honey soap
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
Destiny • New York
Date Submitted: 11/24/2017
I Recommend This Product!
|
|
"Leaves a nice impression!" |
COMMENTS: This soap mold leaves an excellent impression of honeycombs on melt&pour soap. It is very easy to unmold and the mold itself is well made. I absolutely love using it for my oatmeal soaps! I would recommend it to anyone who makes soaps!
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
DeShawn • Florida
Date Submitted: 01/18/2017
I Recommend This Product!
|
|
"What a cool mold" |
COMMENTS: This is a fun mold to get a new look for your soap. Works great, I've only used it with glycerin soap so not sure how the release would be with CP.
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• look • easy release
|
|
• nothing
|
|
|
Missy • Colorado
Date Submitted: 12/30/2016
I Recommend This Product!
|
|
"Love the look of this mold" |
COMMENTS: I really really like the look of this honey comb mold. Makes the soap look like it came from a honey comb!
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
Barbara • Oregon
Date Submitted: 09/30/2016
I Recommend This Product!
|
|
"Makes great soap for my OMH soap" |
COMMENTS: I make a Oatmeal, Goat Milk & Honey soap so I bought this mold. I like it ok but I think the bubble wrap method gave it more character
|
PRODUCT USED IN: Soap - Melt & Pour
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
|
|
• more like you used bubble wrap for the g
|
|
|
Home • Washington
Date Submitted: 09/09/2016
I Recommend This Product!
|
|
"Perfect for beeswax soap" |
COMMENTS: This mold makes a very realistic beeswax pattern on your soap, nothing like the bubble wrap technique. The silicone releases easily. I only wish it came in a longer size! The height and width are perfect, I just wish I could make more bars at once. A great mold!
|
PRODUCT USED IN: Soap - Cold Process
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• pattern in realistic • silicone releases easily
|
|
|
|
|
Katie • California
Date Submitted: 10/18/2015
I Recommend This Product!
|
|
"Cutest mold" |
COMMENTS: I used this for the first time yesterday and am pleasantly surprised! The honeycomb pattern is absolutely adorable. The impression came out clean without a single blemish and the pattern isn't as small as I expected based on other reviews here. I prefer this look to the bubble wrap look that is really common. Great mold, highly recommend!
|
PRODUCT USED IN: Soap - Cold Process
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Sturdy • Cute • Easy to use
|
|
• Wish it came in larger size
|
|
|
Eileen • Pennsylvania
Date Submitted: 10/01/2015
I Recommend This Product!
|
|
"Love this!" |
COMMENTS: I am so happy with this mold. My honey soap came out so cute. One of the other reviewers said the honeycomb imprint was not very deep but to me they just are perfect! I would recommend this mold for honey soaps. They just come out beautiful!
|
PRODUCT USED IN: Soap - Melt & Pour
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• ease of unmolding
|
|
• nothing
|
|
|
Dorene • Georgia
Date Submitted: 09/24/2015
I Recommend This Product!
|
|
"Great Idea" |
COMMENTS: I like this mold. It is easy to use, released the soap wonderfully, sides & bottom were strong, honeycomb shapes were very noticeable, and the soap was lovely. I like the mold, but was a little disappointed in how small the shapes were, the descriptions did say 1/8", but I was thinking bubble wrap size (my fault). All in all, it is a very nice mold & I have used it twice. I just used the design on the bottom & put bubble wrap on top like always. Problem solved.
|
PRODUCT USED IN: Soap - Melt & Pour
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• thick • easy release • nice size bars that fit into hands
|
|
• larger design
|
|
|
Cathy • North Carolina
Date Submitted: 09/18/2015
I Recommend This Product!
|
|
"So Darn Cute!!!??" |
COMMENTS: I love this mold. After opening my box, I thought it was a very shallow honeycomb pattern. After unmolding my 1st batch of CP soap, I thought how cute is that. I will definitely be using these a lot. They are certainly not as deep as using bubble wrap, but still makes a very cute bar of soap. I had no trouble at all unmolding this loaf. I would definitely recommend these molds to anyone who loves making honeycomb soap.
|
PRODUCT USED IN: Soap - Cold Process
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• I love the honeycomb pattern. • Ease of use. • Easy unmolding & retains pattern.
|
|
|
|
|
Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information. |
|
5 Question(s) Shown Below |
Distributor & Drop Shipper Minimum Advertised Pricing |
As a Crafter’s Choice Distributor and/or Drop Shipper you have agreed to abide by the following Minimum Advertised Price (MAP) for each product and price level. You are permitted to advertise products at a higher price. You may not advertise the products at a lower price. Below you will find the MAP for this product.
|
|
|
|
|