International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.
Directions:
Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.
Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.
Care:
Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
Average Customer Rating: |
|
(4 Reviews) |
Majyk • Washington
Date Submitted: 12/05/2016
I Recommend This Product!
|
|
"Nice bars for Samples/Travel/or Guest Bars" |
COMMENTS: Jim makes soap on a rope and he is fixated on the dragonfly so we chose this bar to make samples to send out with each order. We just poured it shallow so we got a full 1 oz sample and our customers seem to like them.
We also will be using these to create guest bars sets.
Jim did say that they were a little difficult to get out on some soap bases.
|
PRODUCT USED IN: Soap - Melt & Pour
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• The design of the dragonfly • The beveled edges look nice • Nice size to actually use.
|
|
|
|
|
Agnes • New York
Date Submitted: 06/18/2016
I Recommend This Product!
|
|
"Sweet Little Mold" |
COMMENTS: Makes lovely guest soaps.
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
Mioshee • Pennsylvania
Date Submitted: 05/22/2016
I Recommend This Product!
|
|
"So cute!" |
COMMENTS: I love this mold for guest soaps; the only thing is, sometimes it difficult to remove the soap afterwards. I'm sure a little spray of non-stick spray will work.
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
Chelsea • Pennsylvania
Date Submitted: 04/25/2016
I Recommend This Product!
|
|
"Nice, Detailed Mold" |
COMMENTS: This mold is one large cavity with 16 square dragonly designs, so you can slice up your soap into 16 little bars. I've used it twice now and been very impressed with both it's sturdy structure and the detail of the designs. Would recommend.
|
PRODUCT USED IN: Soap - Melt & Pour
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Ease of use • Pretty Design
|
|
|
|
|
Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information. |
|
0 Question(s) Shown Below |
Distributor & Drop Shipper Minimum Advertised Pricing |
As a Crafter’s Choice Distributor and/or Drop Shipper you have agreed to abide by the following Minimum Advertised Price (MAP) for each product and price level. You are permitted to advertise products at a higher price. You may not advertise the products at a lower price. Below you will find the MAP for this product.
|