Oval Basic Silicone Mold 1606

International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Directions:
Melt & Pour Soap: Pour melted soap into silicone mold cavities. Allow soap to cool at room temperature until hard. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.

Cold Process Soap: Pour soap at trace into the mold cavities. After at least 24 hours, gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface and gently push on the bottom of mold until the soap starts to release. Grab hold of the soap with a gloved hand, and allow soap to cure for 4-8 weeks. Note that some cold process soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Cold Process/Oven Process Soap: Pour soap at trace into the mold cavities. Preheat oven to 170ºF then place mold in oven. Turn oven off, and keep soap in oven overnight. The next day remove mold from oven. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Allow soap to cure for 2 to 4 weeks.

Hot Process Soap: Scoop hot process soap into mold cavities. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.

Lotion Bars: Pour melted lotion bar mixture into mold cavities. Allow mixture to solidify. Carefully remove lotion bars from mold by gently pulling the sides away from the lotion bars, and then push on the bottom of the mold until the lotion bars starts to release. Grab hold of lotion bar and carefully pull out of mold.

Care:
Hand wash in warm sudsy water.

   • Non-Hazardous Statement
   • Animal Testing Statement

Average Customer Rating:

(37 Reviews)

PRODUCT REVIEWS

Theresa • Tennessee Date Submitted:  03/31/2018 I Recommend This Product!

"I love this mold" COMMENTS:  Soap is easier to hold when using and nor rough edges PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process THINGS I LIKE   THINGS I'D LIKE TO CHANGE • The oval shape • Nothing

Stacy • Colorado Date Submitted:  02/21/2018 I Recommend This Product!

"Good Solid Mold" COMMENTS:  I am new to soap making, but tried some melt & pour soaps and also used these for some larger lotion bars. I love that the mold is silicone and soft sided for easy popping out, but it also has nice edges and a good depth! PRODUCT USED IN:   Soap - Melt & Pour, Lotion Bars & Sticks THINGS I LIKE   THINGS I'D LIKE TO CHANGE • Easy Removal • Good Depth

Kim  • South Carolina Date Submitted:  07/15/2017 I Recommend This Product!

"oval basic silicone mold" COMMENTS:  Love it gives a break from the square mold. PRODUCT USED IN:   Soap - Melt & Pour

Shannon • California Date Submitted:  03/02/2017 I Recommend This Product!

"Easy to unmold" COMMENTS:  This is a super easy mold to unmold soap out of. I like that there is 4 per mold since similar sized mold sometimes only have 3 per mold. I also like that the silicone is so smooth that the soap also has a glossier finish. PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process, Bath Fizzies & Salts THINGS I LIKE   THINGS I'D LIKE TO CHANGE • Easy to unmold • glossy finish

ERIKA • Florida Date Submitted:  02/07/2017 I Recommend This Product!

"A man Bar" COMMENTS:  ideal for men, a right size for men. PRODUCT USED IN:   Soap - Melt & Pour

Karen • Connecticut Date Submitted:  01/26/2017 I Recommend This Product!

"Excellent mold" COMMENTS:  I used this mold for my pink ribbon kit. The soap came out smoothly. PRODUCT USED IN:   Soap - Melt & Pour THINGS I LIKE   THINGS I'D LIKE TO CHANGE • Smooth removal • Easy clean up

JACQUELYN • Kansas Date Submitted:  01/12/2017 I Recommend This Product!

"Oval Soap mold" COMMENTS:  I love this mold. A customer requested oval Soap and this is now my go to mold. PRODUCT USED IN:   Soap - Melt & Pour

Rhonda • Wisconsin Date Submitted:  01/06/2017 I Recommend This Product!

"Shampoo Bar Molds" COMMENTS:  I love the uniform shape and size I get when I make my shampoo bars in these molds. The only thing I dislike is they can be a little hard to get out, because of the way the mold is made. PRODUCT USED IN:   Soap - Cold Process

Lamonica • Michigan Date Submitted:  01/01/2017 I Recommend This Product!

"nice size soap bars" COMMENTS:  I love the size of the soap good mold PRODUCT USED IN:   Soap - Melt & Pour THINGS I LIKE   THINGS I'D LIKE TO CHANGE • size • shape

anastasia • New Jersey Date Submitted:  11/15/2016 I Recommend This Product!

"Quality Molds" COMMENTS:  Great silicone oval molds for individual soaps. Great quality and size is perfect for a 4 plus oz bar of soap. I use them frequently. Makes for a quick molded soap. Carefree unmolding due to the excellent quality silicone. Highly recommend. PRODUCT USED IN:   Soap - Cold Process

Allison • Texas Date Submitted:  07/15/2016 I Recommend This Product!

"Love them" COMMENTS:  Wonderful mold. Easy to use and remove perfect soaps PRODUCT USED IN:   Soap - Melt & Pour

Rachelle • Colorado Date Submitted:  05/01/2016 I Recommend This Product!

"These are enjoyable to work with." COMMENTS:  I bought the COMBO pack of these silicon molds. They are all easy to use and the shapes are all fun. I actually like the square and the oval more than I expected! My CP soap comes out of these very well. I have made plain bars in these already. Now I am thinking about stamping the bars for extra flare. PRODUCT USED IN:   Soap - Cold Process THINGS I LIKE   THINGS I'D LIKE TO CHANGE • Size

Jill  • Massachusetts Date Submitted:  04/25/2016 I Recommend This Product!

"Great Mold, popular with customers" COMMENTS:  My customers love the shape and generous size of these bars. PRODUCT USED IN:   Soap - Cold Process THINGS I LIKE   THINGS I'D LIKE TO CHANGE • Offer this shape/size with more cavities • An 8 or 12 bar size would be awesome

Mary • North Carolina Date Submitted:  03/06/2016 I Recommend This Product!

"high quality" COMMENTS:  This is a sturdy but bendable mold. It was easy to use and produced a nice shaped bar of soap. When the soap was hard, it popped out of the mold easily. PRODUCT USED IN:   Soap - Melt & Pour

Deborah • Illinois Date Submitted:  02/29/2016 I Recommend This Product!

"Always excellent quality." COMMENTS:  Strong molds that hold their shape well. Nice bars. PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process

Marina • Illinois Date Submitted:  01/31/2016 I Recommend This Product!

"Perfect!" COMMENTS:  Perfect size for what I needed. Easy to get my soaps out of! PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP

Julie • California Date Submitted:  12/29/2015 I Recommend This Product!

"Easy To Work With" COMMENTS:  Silcone molds are great. Very easy to work. Holds up for multi use. PRODUCT USED IN:   Soap - Melt & Pour

DORNE • Florida Date Submitted:  10/25/2015 I Recommend This Product!

"perfect" COMMENTS:  Just what I needed to put loofah in, previously sliced up. The size is perfect for this and the shape is the shape of the loofah. I had tried round and they were a bit small and the loofah is more oval so this mold, its size, sturdiness, depth and everything cannot be improved on for the use I have for it. PRODUCT USED IN:   Soap - Cold Process, Soap - CPOP THINGS I LIKE   THINGS I'D LIKE TO CHANGE • everything • nothing

Teresa • Alabama Date Submitted:  06/05/2015 I Recommend This Product!

"Crafters Choice™ Oval Basic Silicone Mold 1606" COMMENTS:  My "go to" mold for small batches and left over soap from other pours. Makes a great size bar and is easy to handle. Also a good bar for using the water soluable paper. Makes great favors for kids theme parties. PRODUCT USED IN:   Soap - Melt & Pour

YTS • Texas Date Submitted:  06/01/2015 I Recommend This Product!

"Great Molds! " COMMENTS:  Great Molds! I absolutely love all the Crafters Choice molds. They last, don't bow, easy to clean, and even safe in the oven! PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP, Soap - Hot Process, Soap - Shampoo Bars, Soap - Shave Shampoo, Bath Fizzies & Salts, Exfoliants & Sugar Scrubs, Lotion Bars & Sticks

Pamela • North Carolina Date Submitted:  02/10/2015 I Recommend This Product!

"Couldn't make my soaps without it" COMMENTS:  This mold is the perfect shape and size that I like. This mold is easy to remove the soaps from and its easy to clean up. PRODUCT USED IN:   Soap - Melt & Pour THINGS I LIKE   THINGS I'D LIKE TO CHANGE • Everything • nothing

Dorene  • Georgia Date Submitted:  02/03/2015 I Recommend This Product!

"Loving This Mold!" COMMENTS:  I love the color, transparent, so one can see underneath without guessing. The ease of use, strong sides, soap just slides out, no more pulling, pushing and almost breaking fingers and hand trying to get it out the plastic. Soap comes out beautiful without the holes from that dreadful white plastic one. Love my silicone molds! PRODUCT USED IN:   Soap - Melt & Pour THINGS I LIKE   THINGS I'D LIKE TO CHANGE • Nice Color • Able to see through it • strong and easy to use

Nikki • Texas Date Submitted:  02/01/2015 I Recommend This Product!

"Makes a nice big bar" COMMENTS:  I've been looking for an oval mold that would give me a bar over 4 ounces. This is it! Great shape and size. Soap released easily. PRODUCT USED IN:   Soap - Cold Process THINGS I LIKE   THINGS I'D LIKE TO CHANGE • Size of bar • Shape • Ease of unmolding

Home • South Carolina Date Submitted:  01/19/2015 I Recommend This Product!

"My New Lotion Bar Mold" COMMENTS:  I use this mold for my lotion bars and I love the fact that the mold holds it's shape well and is very sturdy, cleans up easy and the bars fall right out of the mold. PRODUCT USED IN:   Lotion Bars & Sticks

CHP • Texas Date Submitted:  12/23/2014 I Recommend This Product!

"The best oval mold!" COMMENTS:  This is the mold I've been looking for! I have another oval mold, but even with using sodium lactate & waiting a week, the soap wouldn't come out easily. Because this mold is so flexible, I was able to unmold after just 2 days & no sodium lactate!! I will buy a couple more for sure! PRODUCT USED IN:   Soap - Cold Process THINGS I LIKE   THINGS I'D LIKE TO CHANGE • 4 bar size is perfect for small batches! • Super flexible! • Soap comes out easily, super shiny! • Don't change a thing!

Shanene  • Florida Date Submitted:  11/14/2014 I Recommend This Product!

"Perfect size to sell soap bars" COMMENTS:  The soaps come out shiny and a wonderful shape. My only issue is that they are a little troublesome to pop out at times, but still the best molds I've used so far. PRODUCT USED IN:   Soap - Melt & Pour THINGS I LIKE   THINGS I'D LIKE TO CHANGE • Shine on bars • Size and shape • Fits perfect in soap boxes

Sharon  • Nevada Date Submitted:  10/15/2014 I Recommend This Product!

"Oval Basic Silicone Mold" COMMENTS:  I liked the oval shape and the larger bar that it makes. Great sized bath bar! I like working with silicone molds as they last almost indefinitely with proper use and soap are easily unmolded. This soap mold is large enough to embed small toys. I'm using this mold for molding a clear cast soap colored with a small amount of orange, embedding plastic spiders and using the black glitter for effect. A non-sweet treat for everyone! PRODUCT USED IN:   Soap - Melt & Pour THINGS I LIKE   THINGS I'D LIKE TO CHANGE • Bath bar size • Great for embedding small toys • Oval shape • Nothing

Timothy • West Virginia Date Submitted:  09/13/2014 I Recommend This Product!

"Great Product!" COMMENTS:  I love these for my mp soap, makes a great gift. Very popular mold I'm glad I got it!! PRODUCT USED IN:   Soap - Melt & Pour

Noblesville • New York Date Submitted:  09/12/2014 I Recommend This Product!

"Great finished product" COMMENTS:  I love this mold for the finished product. The bars are 5-5.3 ounce, this is a nice size for bath bars. Thanks again for a great product. PRODUCT USED IN:   Soap - Melt & Pour, Soap - Shave Shampoo

Zena • Tennessee Date Submitted:  08/13/2014 I Recommend This Product!

"Great Mold!" COMMENTS:  This mold produces a beautiful, professional looking finished product, and the soap pops right out with no trouble. I'll be getting a couple more of these! PRODUCT USED IN:   Soap - Melt & Pour

Brandi • Texas Date Submitted:  08/12/2014 I Recommend This Product!

"Great size, provides a beautiful shine" COMMENTS:  I love the size and look of the finished bars. This produce provides a bath sized bar of soap with plenty of room for embedding objects. It also gives a nice shine to the finished product. PRODUCT USED IN:   Soap - Melt & Pour

Debbie • Missouri Date Submitted:  08/01/2014 I Recommend This Product!

"Large" COMMENTS:  This mold makes large (5 oz.) bars of soap. I love silicone molds! I had no trouble unmolding melt and pour soap. PRODUCT USED IN:   Soap - Melt & Pour

pam • Texas Date Submitted:  07/23/2014 I Recommend This Product!

"great" COMMENTS:  Makes large family size soap the last for a long time!!! PRODUCT USED IN:   Soap - Melt & Pour, Soap - Hot Process, Liquid Soap & Washes, Exfoliants & Sugar Scrubs, Face Care, Hair Care, Lip Care, Lotion Bars & Sticks, Lotions, Creams & Butters, Mineral Makeup

Eileen • Pennsylvania Date Submitted:  06/22/2014 I Recommend This Product!

"Makes Perfect Soap!" COMMENTS:  I just can't say enough about this mold. It turned out 4 beautiful, big, and perfect oval bars of soap. I made m&p soap in them. They easily came out of the mold and really look professional. PRODUCT USED IN:   Soap - Melt & Pour THINGS I LIKE   THINGS I'D LIKE TO CHANGE • easily unmolds • made big bars of soap • look professional

Rebecca • New York Date Submitted:  06/16/2014 I Recommend This Product!

"Easy release" COMMENTS:  This silicone mold works great for my M&P soaps, it releases them with ease. No freezing required and they very flexible. I liked the all blue ones better though. PRODUCT USED IN:   Soap - Melt & Pour THINGS I LIKE   THINGS I'D LIKE TO CHANGE • go back to the blue ones

Andrea • North Carolina Date Submitted:  04/01/2014 I Recommend This Product!

"Perfect mold for larger bars" COMMENTS:  This is the perfect mold for larger bars. The oval shape still fits in the hand well even though the bars are well over 5 ounces. Great silicone release, too. PRODUCT USED IN:   Soap - Melt & Pour THINGS I LIKE   THINGS I'D LIKE TO CHANGE • Nice large size bars • Easy release

Ann  • Oklahoma Date Submitted:  03/18/2014 I Recommend This Product!

"Easy Out!" COMMENTS:  Crafter's Choice silicone molds are so easy to use. No more struggling trying to unmold soaps. PRODUCT USED IN:   Soap - Melt & Pour THINGS I LIKE   THINGS I'D LIKE TO CHANGE • Ease of use

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.
	6 Question(s) Shown Below

CC Questions And Answers

"Is this the largest oval bar mold in silicone that you carry? Thank you!" Click Here To View 1 answer(s) Posted By: Susie   |   October 25, 2021 Email Me When This Question Gets Answered

Staff Answer The Crafter's Choice™ Body Bar Oval Silicone Mold 1626 is larger.   Posted By: WSP Staff   |   Date: October 26, 2021 Was this answer helpful? Yes | No

---

"What box do these fit in?" Click Here To View 1 answer(s) Posted By: Synthia   |   March 14, 2021 Email Me When This Question Gets Answered

Staff Answer This fits in the following: Crafters Choice™ Soap Box - Oval Window Crafters Choice™ Soap Box - No Window Crafters Choice™ Soap Box - Rectangle Window   Posted By: WSP Staff   |   Date: March 15, 2021 Was this answer helpful? Yes | No

---

"Can I use the 4x6 shrink wrap for these bars?" Click Here To View 1 answer(s) Posted By: Renee    |   April 22, 2019 Email Me When This Question Gets Answered

Staff Answer Yes, the 4 x 6 shrink wrap will work for this size bar.   Posted By: WSP Staff   |   Date: April 23, 2019 Was this answer helpful? Yes | No

---

"Good Evening, does tis box fit the soap from mold 1606?" Click Here To View 1 answer(s) Posted By: Shanene    |   October 08, 2017 Email Me When This Question Gets Answered

Staff Answer Yes, this box will fit the oval soap made from the silicone mold 1606.   Posted By: WSP Staff   |   Date: October 11, 2017 Was this answer helpful? Yes | No

---

"I just got these molds and i do like them , but when i made the salt spa bars cp soap the bottom of the soap crumble a little around edges, In one of the soap answers someone said to spray them , with what ? " Click Here To View 1 answer(s) Posted By: connie lucialla   |   June 04, 2014 Email Me When This Question Gets Answered

Staff Answer When making CP Soap: Spray or grease mold before use. This will help make unmolding easier. May also need to keep soap in mold for at least 24 hours before unmolding.   Posted By: WSP Staff   |   Date: June 06, 2014 Was this answer helpful? Yes | No

---

"What is the difference between the Basic and the Classic Oval molds? They look the same to me and are the same price. Is there an advantage of one over the other?" Click Here To View 2 answer(s) Posted By: Lisa   |   August 20, 2013 Email Me When This Question Gets Answered

Staff Answer There is an embossed edge on all of the classic silicone molds. I will pass along your question to our company photographer so that we can improve our images to show the difference. Thank you!!   Posted By: WSP Staff   |   Date: August 20, 2013 (1) Found this helpful. Was this answer helpful? Yes | No

The Oval Classic Mold has an embossed edge, but the Oval Basic Mold has a smooth edge. You can see this difference if you click on the product details and scroll through the product photos.   Posted By: Leah   |   Date: August 21, 2013 (1) Found this helpful. Was this answer helpful? Yes | No