|
|
Paisley Soap Mold Tray (MW 126) |
|
|
|
 |
Additional
Information |
|
Directions &
Ingredients |
|
SDS &
Documents |
|
|
The paisley "twisted teardrop" design originated in Iran and India but got its popular name from the town in Scotland when they started reproducing the design based on cashmere shawls brought back by soldiers serving in the colonies. The Beatles brought it to the states in the 1960s and it caught on with the psychedelic crowd. The Paisley Soap Mold Tray makes six groovy soaps.
Common Uses:
Melt & Pour Soap. Cold Process Soap. Lotion Bars.
Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC Plastic (Not Approved for Food Contact)
Country of Origin: United States
Milky Way Soap Molds can tolerate temperatures of 135ºF to145ºF. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling.
Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
Country Of Origin: United States
|  | This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a). |
|
|
International Nomenclature of Cosmetic Ingredients (INCI):
This product does not need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved):
This product does not need to be listed on the product ingredient label.
Directions:
Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold, and slice into bars. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.
Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Slice into bars. Allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Lotion Bars: Pour melted lotion bar mixture into mold at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold. Slice into lotion bars.
Care:
Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
| Average Customer Rating: |
 |
(12 Reviews) |
|
Karen • Oklahoma
Date Submitted: 07/15/2018
I Recommend This Product!
|
|
"I’m in Love! ??" |
|
COMMENTS: This probably my favorite mold for melt and pour soap, Customers too! Very detailed and easy to use. I recommend putting it in frig for 15 minutes before unmolding. It’s beautiful!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• My favorite!
|
|
• Nothing
|
|
|
|
Jamie • Arizona
Date Submitted: 12/24/2017
I Recommend This Product!
|
|
"Gorgeous Mold Design" |
|
COMMENTS: I ordered several designed molds and this one is now my favorite. The design is right up my alley, nice crisp design with finished product and a great size. I like 5 oz bars. Will be ordering some in bulk soon.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
C • New Hampshire
Date Submitted: 05/17/2017
I Recommend This Product!
|
|
"Beautiful impressions" |
|
COMMENTS: This mold made beautiful impressions and removal was easy and clean. Very nice mold.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Danielle • Massachusetts
Date Submitted: 12/31/2016
I Recommend This Product!
|
 |
"Beautiful design" |
|
COMMENTS: Very unique design and it works great with layering. I like to use contrasting colors or a nice ombré effect. I like the way the design flows from one bar to the next. It is challenging to remove the soap from the mold unless you freeze it for a half hour then run it under hot water to release.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Design
|
|
|
|
|
|
Deborah • Connecticut
Date Submitted: 11/02/2016
I Recommend This Product!
|
|
"OMG Everyone loves this mold! " |
|
COMMENTS: I normally use loaf and slab molds. Because I am a paisley fan I decided to give this a try. OMG I am in love! Nice size bars, imprint is devine! And so many ways you can do this bar, solid, or highlight the paisley! Just love, going to get more so I am never without! Soap pops right out, no freezing or prying or praying!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy soap release
|
|
• Nothing
|
|
|
|
Tisa • Ohio
Date Submitted: 05/23/2016
I Recommend This Product!
|
|
"Fabulous Design. " |
|
COMMENTS: I am so glad I finally used this mold. The soaps turned out beautifully. Easy to get out of the mold too. I may have to buy another as this only makes 6 bars at a time.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Everything.
|
|
• Make it a Silicone mold.
|
|
|
|
Jennifer • Ohio
Date Submitted: 04/15/2016
I Recommend This Product!
|
|
"Makes great soap bars!" |
|
COMMENTS: This mold made nice large bars of soap, I absolutely love the design, and it was easy to use, as always when it comes to Milky Way molds!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Sarah • California
Date Submitted: 03/29/2016
I Recommend This Product!
|
|
"Great design!" |
|
COMMENTS: I love the pattern on this mold and its the only plastic soap mold that I've been able to pop my soap out of easily. I would recommend this to anyone and I'll be trying more tray style molds from now on.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Ashley • New York
Date Submitted: 04/18/2015
I Recommend This Product!
|
|
"Love the design" |
|
COMMENTS: I love the paisley design on this mold. Super easy to cut the bars as well. Only problem I had was having to put the mold in the freezer to release the soap.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Carla • Florida
Date Submitted: 03/05/2015
I Recommend This Product!
|
|
"Nice mold" |
|
COMMENTS: This mold is great. I love the design and it really makes my soaps pop.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Love the design
• Easy to pop the soap out
|
|
• None
|
|
|
|
Kandace • Ohio
Date Submitted: 12/08/2014
I Recommend This Product!
|
|
"This mold is perfect!" |
|
COMMENTS: I really liked the look of this mold but wasn't sure at first about the intricate design. No worries, though; it unmolded beautifully with every detail intact. I love it! The size of the bars is ideal, too: nice, big bars and just right to fit in your hand comfortably. I only wish I'd bought a few more of these molds when I bought this one, because it's now one of my first choices in soapmaking. I hope Milky Way makes several more designs in this style.
|
|
PRODUCT USED IN: Soap - CPOP
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• depth of mold
• ease of unmolding
• intricate design
|
|
• nothing at all -- love it!
|
|
|
|
Maria • Pennsylvania
Date Submitted: 07/20/2014
I Recommend This Product!
|
|
"Great product" |
|
COMMENTS: makes beautiful shaped soaps
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
| Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information. |
 |
2 Question(s) Shown Below |
| Distributor & Drop Shipper Minimum Advertised Pricing |
As a Crafter’s Choice Distributor and/or Drop Shipper you have agreed to abide by the following Minimum Advertised Price (MAP) for each product and price level. You are permitted to advertise products at a higher price. You may not advertise the products at a lower price. Below you will find the MAP for this product.
|
|
|
|
|
