|
|
Rectangle Basic Silicone Mold 1601 |
|
|
|
 |
Additional
Information |
|
Directions &
Ingredients |
|
SDS &
Documents |
|
|
Silicone molds and rectangle shaped molds are favorites for many soap makers. This has both! Silicone allows for easy removal and the rectangle shape allows soapers to make a classic soap bar.
Country Of Origin: China
|  | This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a). |
|
|
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.
Directions:
Melt & Pour Soap: Pour melted soap into silicone mold cavities. Allow soap to cool at room temperature until hard. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Cold Process Soap: Pour soap at trace into the mold cavities. After at least 24 hours, gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface and gently push on the bottom of mold until the soap starts to release. Grab hold of the soap with a gloved hand, and allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Cold Process/Oven Process Soap: Pour soap at trace into the mold cavities. Preheat oven to 170ºF then place mold in oven. Turn oven off, and keep soap in oven overnight. The next day remove mold from oven. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Allow soap to cure for 2 to 4 weeks.
Hot Process Soap: Scoop hot process soap into mold cavities. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Lotion Bars: Pour melted lotion bar mixture into mold cavities. Allow mixture to solidify. Carefully remove lotion bars from mold by gently pulling the sides away from the lotion bars, and then push on the bottom of the mold until the lotion bars starts to release. Grab hold of lotion bar and carefully pull out of mold.
Care:
Hand wash in warm sudsy water.
| Average Customer Rating: |
 |
(90 Reviews) |
|
Cathie • Washington
Date Submitted: 09/29/2024
I Recommend This Product!
|
 |
"Perfect size!" |
|
COMMENTS: I needed a mold to hold silicone mats that I specially ordered from Russia. My mats fit perfectly in the cavities and popped out pretty well. They held up well even after putting them in the freezer to harden up the soap more. I do wish that they were more like silicone, more flexible but I'm very happy with them overall.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Good size
|
|
• More flexible
|
|
|
|
Lily • Pennsylvania
Date Submitted: 07/02/2019
I Recommend This Product!
|
|
"Best molds ever!!" |
|
COMMENTS: I only use these molds! They are perfect! They make very large bars of soap which I love. It is a hefty bar that lasts a long time.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Home • Georgia
Date Submitted: 03/13/2019
I Recommend This Product!
|
|
"Absolutely love this mold" |
|
COMMENTS: I've bought several silicone bar molds in an attempt to find one in which the individual cavities didn't bulge with the weight of CP soap. This mold has been the only one to hold up to multiple uses. I had found that bars cut from loaves tend to be too big to comfortably and effectively lather with a washcloth until it's been used for a week or so, but the bars made with this mold are a great size for adult hands. Not so dainty that man-sized hands can't work it and not so ginormous that lady hands have to cut it in half to maneuver.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Samantha • New York
Date Submitted: 10/15/2018
I Recommend This Product!
|
|
"A PERFECT MOLD" |
|
COMMENTS: I wasn't sure if my 2lb melt and pour would fill the mold. And it did! I had a little bit of melt and pour left over and put it another mold for sample size soaps! It held its shape really well and was super easy to work with! I also really appreciate how fast it came in the mail!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Meghan • Illinois
Date Submitted: 09/25/2018
I Recommend This Product!
|
|
"The perfect size" |
|
COMMENTS: for a nice, easy to hold but hefty bar of soap. The mold stands up well and I haven't had any issues with warping or discolouration. Although, every speck of dust does seem to cling to these when not in use, so I tend to keep these in an airtight container in between uses!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
sandra • Georgia
Date Submitted: 06/14/2018
I Recommend This Product!
|
|
"Great Molds" |
|
COMMENTS: Perfect size for larger bars of soap, high quality and soap releases easily.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• quality
• size
|
|
|
|
|
|
Theresa • Tennessee
Date Submitted: 03/31/2018
I Recommend This Product!
|
|
"I love this mold" |
|
COMMENTS: It is just right for salt bars
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• The shape
|
|
• Nothing
|
|
|
|
Teresa • Alabama
Date Submitted: 03/22/2018
I Recommend This Product!
|
|
" Rectangle Basic Silicone Mold 16" |
|
COMMENTS: My favorite mold. Friends and family like the size because it fits the hand for easier use.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size and weight of bars
|
|
• Make this in an 8 cavity item
|
|
|
|
Deb • Pennsylvania
Date Submitted: 11/05/2017
I Recommend This Product!
|
|
"Great mold!" |
|
COMMENTS: I use this mold for my cp soap with loofah. It's just the right size, and the soaps turn out nice. Easy to unmold.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
michelle • Michigan
Date Submitted: 09/07/2017
I Recommend This Product!
|
|
"Part of kit ingredients" |
|
COMMENTS: This product was part of a kit. The product performed well - Would buy for future products.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Lekesha • South Carolina
Date Submitted: 09/04/2017
I Recommend This Product!
|
|
"perfect" |
|
COMMENTS: I have been using other molds & I have no idea why it took me so long to purchase this silicon mold. The soaps are the perfect size & it couldn't be any easier to unmold. I don't know how or why I wasted my time previously, in using the other. I'll never go back!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• size
• ease of use
|
|
|
|
|
|
Brandy • Texas
Date Submitted: 08/21/2017
I Recommend This Product!
|
|
"Perfect!!!" |
|
COMMENTS: I LOVE THIS MOLD! The cavities are a little larger than I was expecting and that made it even better! The bars come out to about 6-7 oz chunky bars. Great for more intricate designs or something you can't pour from topside! Release is so easy, too! Buying more!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Monica • North Carolina
Date Submitted: 07/17/2017
I Recommend This Product!
|
|
"Love these!" |
|
COMMENTS: A simple way to make a 5 oz bar without cutting the soap. It releases with ease. Gotta love these!!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Patricia • Louisiana
Date Submitted: 06/10/2017
I Recommend This Product!
|
|
"Soap comes right out!" |
|
COMMENTS: Love this mold. Will be buying more. Only problems I have are that it retains scents pretty well. I put mine in hot water with baking soda, then soaked it in vinegar, and put it in the sun by my kitchen window for an hour or so. Did the trick.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
L. • Florida
Date Submitted: 04/25/2017
I Recommend This Product!
|
|
"Great" |
|
COMMENTS: Makes perfect rectangle bars. Easy removal.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Doreen • Maryland
Date Submitted: 03/09/2017
|
 |
"Silicon mold" |
|
COMMENTS: Good, but overpriced.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Large soap bar size
|
|
• Price
|
|
|
|
ViveHoot • New York
Date Submitted: 02/12/2017
I Recommend This Product!
|
|
"Perfect" |
|
COMMENTS: I am very happy with this mold. It comes out really easy once you soaps are ready. Perfect Size. I am ordering another so that I can make more!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
kris • Florida
Date Submitted: 01/23/2017
I Recommend This Product!
|
|
"Rectangle Basic Silicone Mold" |
|
COMMENTS: I like the wider bar width of 3.5" most others I have seen are smaller. This is a thick silicone mold and study. The soaps have released easily from the mold with both the melt and pour and the cold process.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
deborah • Ohio
Date Submitted: 01/19/2017
I Recommend This Product!
|
|
"Making the best soaps" |
|
COMMENTS: This mold made the best soap bar. My first try at it. I was a little scared but it was easy. Slid right out. The bar was large & thick. I will be buying more.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy to use
|
|
• Nothing
|
|
|
|
dondra • Maryland
Date Submitted: 01/18/2017
I Recommend This Product!
|
|
"product staple " |
|
COMMENTS: This is an all around great basic mold that can be used for anything from soap bars to cutting up for product samples. Filling is easy and the silicone is a nice thick material. Unmolding is even easier as you can basically invert each square. Soap bars come out perfectly smooth like at the stores. Love this!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Shampoo Bars, Face Care, Lotions, Creams & Butters
|
|
|
|
|
Lori • Wisconsin
Date Submitted: 01/14/2017
I Recommend This Product!
|
|
"Durable mold" |
|
COMMENTS: High quality mold, easy to clean and remove soap.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Briony • New York
Date Submitted: 12/02/2016
I Recommend This Product!
|
|
"Great mold!" |
|
COMMENTS: I'm new to making m&p soap and this mold is so easy to use. Makes a perfect size bar for what I was looking for. I definitely will get more of these
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Bridget • New York
Date Submitted: 11/06/2016
I Recommend This Product!
|
|
"A solid foundation mold" |
|
COMMENTS: A must to add to your collection. This is a very useful mold. You will use it over and over again. Everything releses so easily out of the mold. Makes a nice size bar too.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP, Soap - Hot Process
|
|
|
|
|
Christie • Kansas
Date Submitted: 10/22/2016
I Recommend This Product!
|
|
"Love this mold, easy to use" |
|
COMMENTS: Nice mold, easy to use, only 4 compartments though. Sturdy, this will last forever.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Dawn • Wisconsin
Date Submitted: 10/11/2016
I Recommend This Product!
|
|
"Rectangle Basic Silicone Mold" |
|
COMMENTS: Too many times I was asked, "don't you just make a rectangle shaped soap," so I bought this mold to appease the non-creative buyers. It's a great mold. Nice, large soap (5+ oz) and very easy to unmold. I highly recommend it.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Elizabeth • New York
Date Submitted: 09/23/2016
I Recommend This Product!
|
|
"Nice Mold!" |
|
COMMENTS: Used for the first time today and the argan oil soap came out easily.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy to manipulate
|
|
• nothing
|
|
|
|
billing • Georgia
Date Submitted: 07/16/2016
I Recommend This Product!
|
|
"Will order more" |
|
COMMENTS: I love this mold to make small batches of M&P. It has no bowing, is nice and sturdy and cleans well. makes nice and clean and smooth glossy looking bars. Definitely will be ordering another
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Mary • Ohio
Date Submitted: 06/23/2016
I Recommend This Product!
|
|
"Great mold" |
|
COMMENTS: Love this for individual bars when I don't want an entire loaf.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Allison • Texas
Date Submitted: 06/15/2016
I Recommend This Product!
|
|
"Easy to use" |
|
COMMENTS: Works great. Easy to get soap out of mold and soap looks smooth and shiny!! Quick to clean too between uses.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Cierra • Georgia
Date Submitted: 06/13/2016
I Recommend This Product!
|
|
"So far so good" |
|
COMMENTS: I have used this mold a few times and I have yet to have any issues with it. I love the size bars that this mold makes and I love the way it makes my products look uniform in size. Easy release and no tears.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
cynthia • Washington
Date Submitted: 06/01/2016
I Recommend This Product!
|
|
"Very nice molds with straight sides" |
|
COMMENTS: I bought 2 of these for my small batches. They make nice standard size bars and I find the straight sides easy to wrap cigar band labels around. Soap comes out easily and cleanly because they are flexible but I do put it in the freezer, too, before unmolding.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Rachelle • Colorado
Date Submitted: 05/01/2016
I Recommend This Product!
|
|
"Easy to use for CP" |
|
COMMENTS: I bought the COMBO pack of these silicon molds. They are all easy to use and the shapes are all fun. I actually like the square and the oval more than I expected! My CP soap comes out of these very well. I have made plain bars in these already. Now I am thinking about stamping the bars for extra flare.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size
• Shape
• Feel of the bars in your hand
|
|
|
|
|
|
Pamela • Ohio
Date Submitted: 04/13/2016
I Recommend This Product!
|
|
"great product" |
|
COMMENTS: Love this mold gives me perfect bars
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Ashley • Pennsylvania
Date Submitted: 03/11/2016
I Recommend This Product!
|
|
"Rectangle Basic Silicone Mold 1601 " |
|
COMMENTS: We love this mold as it is creates the perfect sized soap bars. We have 6 molds already and plan to order more. Great product.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Deborah • Illinois
Date Submitted: 02/29/2016
I Recommend This Product!
|
|
"Always excellent quality." |
|
COMMENTS: I love CC molds and these are no exception. Very strong and hold their shape after many uses.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Marina • Illinois
Date Submitted: 01/31/2016
I Recommend This Product!
|
|
"I love silicon molds!" |
|
COMMENTS: Easy to clean. Perfect shape.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP
|
|
|
|
|
1600 Elm Creek Dr. • Ohio
Date Submitted: 01/19/2016
I Recommend This Product!
|
|
"Great Soap Mold" |
|
COMMENTS: This is a great little soap mold if you want to test soap, or if you have a recipe and you need to put a little extra soap batter. Love it
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
|
|
|
|
|
Andrea • Texas
Date Submitted: 12/16/2015
I Recommend This Product!
|
|
"CLEAN SHARP CUT" |
|
COMMENTS: I've been soaping for over 25 years and always looking for the perfect mold. I've not used these on cold process but on quick melt and pour. The soaps come out so clean and sharp around the edges. Very easy to work with and while they are what I consider to be very expensive, they stand up to continued use so they are well worth the price. When I think of the time I would spend struggling with other plastic molds these pay for themselves. Also helpful for me now that I'm developing arthritis in my wrists. I'm back for larger ones. Oh, don't forget to put these on a cookie sheet as they are flimsy and difficult to move once filled.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Julie • California
Date Submitted: 11/04/2015
I Recommend This Product!
|
|
"Perfect Mold" |
|
COMMENTS: These molds are sturdy and easy to pop the soaps out. They are very durable.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Dana • California
Date Submitted: 09/02/2015
I Recommend This Product!
|
|
"Great Mold!" |
|
COMMENTS: I love this mold for my picture soaps. The soaps are very easy to unmold, which is great because I have rheumatoid arthritis which makes my hands hurt from time to time. Couldn't live without it!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Michele • Ohio
Date Submitted: 08/31/2015
I Recommend This Product!
|
|
"Fantastic!" |
|
COMMENTS: Love this! It cleans well, it was stable enough for both CP and MP soap. It is perfect for testing out recipes too.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
YTS • Texas
Date Submitted: 08/16/2015
I Recommend This Product!
|
|
"I love these molds!" |
|
COMMENTS: I love these molds!
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Steve • Georgia
Date Submitted: 08/14/2015
I Recommend This Product!
|
|
"Love these molds!" |
|
COMMENTS: I absolutely love these molds. The soap pops out so easily. So much better than the hard plastic molds. Such a great selection of shapes and sizes. I want them all!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Lynne • New Mexico
Date Submitted: 08/07/2015
I Recommend This Product!
|
|
"perfect large size" |
|
COMMENTS: This mold is great for making all kind of soaps, the size is large and perfect for men soaps...big hand size.. I purchased this with the mold kit but will be ordering more molds individually.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• big size
|
|
• nothing
|
|
|
|
Dorene • Georgia
Date Submitted: 07/11/2015
I Recommend This Product!
|
|
"Great Mold!" |
|
COMMENTS: Nothing beats silicone molds and this one is awesome! Strong on all four sides, easy release and deep enough to fit into a man's hands. I use this one to make soaps for men, love that it is clear & can be seen through it to measure different colors when blended. Great mold!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Jennifer • New York
Date Submitted: 05/19/2015
I Recommend This Product!
|
|
"love this product " |
|
COMMENTS: This mold makes great big bars! Love it for our manly smells.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Exfoliants & Sugar Scrubs
|
|
|
|
|
heather • Georgia
Date Submitted: 05/03/2015
I Recommend This Product!
|
|
"Love the new molds!" |
|
COMMENTS: I have the original blue molds for years, but they were starting to have some tears in the corners after hundreds of uses. The original blue ones are very, very sturdy, and I hoped I would like these new ones as much. It turns out the new translucent molds are even better than the original ones. The soap literal falls out of the mold! I make (initially) soft, sticky soap that can get stuck in the molds, but the bars just slide right out of the new ones. They are easier to wash too. The blue ones usually require at least 2 washing to get all of the oily residue off, but these new ones only need one washing. I will definitely purchase more!
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• soap slides right out
|
|
• nothing
|
|
|
|
Mia • West Virginia
Date Submitted: 02/18/2015
I Recommend This Product!
|
|
"Finally!" |
|
COMMENTS: After a lot of cheap molds or dimensions I didn't care for I finally ordered this one and it's awesome. I love silicone and the size is perfect. I have the regular loaf mold too and I like that this makes soap approx. the same dimensions as that. (I'm a little picky lol)
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Rhonda • Louisiana
Date Submitted: 01/19/2015
I Recommend This Product!
|
|
"Love this mold" |
|
COMMENTS: This is a really good mold. You have to love the silicone molds! They last and keep their shape.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• keeps shape and easy soap removal
|
|
• nothing
|
|
|
|
Becky • Utah
Date Submitted: 01/15/2015
I Recommend This Product!
|
|
"Nice size" |
|
COMMENTS: We love using this mold for our melt and pour bars of soap. They make the perfect size of bars.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Good size of bars
|
|
• Wish they would last a little longer
|
|
|
|
Krista • California
Date Submitted: 12/08/2014
I Recommend This Product!
|
|
"good size bar" |
|
COMMENTS: I have used this mold to make both MP & CP soap. It is very easy to unmold and the bar is huge!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• good size bar
|
|
|
|
|
|
Heather • Maryland
Date Submitted: 11/22/2014
I Recommend This Product!
|
|
"Perfect size bars" |
|
COMMENTS: Easy to use, easy to clean silicone tray makes 4 perfect bars of soap.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Barbara • Ohio
Date Submitted: 11/22/2014
I Recommend This Product!
|
|
"Love my new molds!!" |
|
COMMENTS: Makes great size bars that pop out of the mold great. Cleans up easy too.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP
|
|
|
|
|
Kathy • Oklahoma
Date Submitted: 11/09/2014
I Recommend This Product!
|
|
"Efficient" |
|
COMMENTS: I love having this mold for when I have too much to fit in my loaf or tray.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Home • Indiana
Date Submitted: 11/03/2014
I Recommend This Product!
|
|
"Works good" |
|
COMMENTS: Works like a charm!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Ashley • New York
Date Submitted: 10/29/2014
I Recommend This Product!
|
|
"Great" |
|
COMMENTS: I love this mold as it is extremely easy to undo the soaps from it. The only down fall is that it is very thin, and the first time one of them ripped right in half. I will be ordering another though since they do work perfectly and make very big soaps.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Jecci • Ohio
Date Submitted: 10/28/2014
I Recommend This Product!
|
|
"Salt Bars" |
|
COMMENTS: This mold is great for salt bars. They unmold easily and no more crumby salt bars.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Lisa • Illinois
Date Submitted: 10/28/2014
I Recommend This Product!
|
|
"Great size" |
|
COMMENTS: Fun and easy to use
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Trisha • Georgia
Date Submitted: 10/24/2014
I Recommend This Product!
|
|
"Wonderful big soaps!" |
|
COMMENTS: This mold was super easy to use and made very nice size soaps. The soap came out glossy and professional looking. I also like that I can make smaller batches.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Cindy • Wisconsin
Date Submitted: 08/06/2014
I Recommend This Product!
|
|
"Great Silicone Molds" |
|
COMMENTS: These silicone molds hold their shape but are easy to un-mold. By far these are the best molds I have ever used. Buy these molds and you will be happy with them.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Melissa • New York
Date Submitted: 08/03/2014
I Recommend This Product!
|
|
"So awesome!" |
|
COMMENTS: I ordered this product after using store bought plastic molds. This product has made my life so much easier and makes amazing soap molds! I couldn't be happier with the product.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Alysa • Georgia
Date Submitted: 07/19/2014
I Recommend This Product!
|
|
"Great Product" |
|
COMMENTS: Easy to use and very flexible !!!!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Katy • North Carolina
Date Submitted: 07/15/2014
I Recommend This Product!
|
|
"very easy to use, just as as WSP molds" |
|
COMMENTS: this makes a very professional looking glossy bar of soap and it is super easy to use
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• tough
• unmolding is easy
|
|
• nothing
|
|
|
|
Lori • Ohio
Date Submitted: 06/27/2014
I Recommend This Product!
|
|
"Love it!" |
|
COMMENTS: This mold is GREAT! Have no problems unmolding my MP soaps. It is a quality made product, way better than any plastic mold. It is also very easy to clean, I love it!!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Nice size bar of soap
• Unmolds easy
• Cleans easy
|
|
• Nothing at all, LOVE IT!
|
|
|
|
Marie • South Dakota
Date Submitted: 05/20/2014
I Recommend This Product!
|
|
"Another Great Mold" |
|
COMMENTS: This mold is very sturdy and the sides are perfectly squared. I recommend placing it on a cutting board or baking pan so it does not move, as all four cavities bend.
I use this to make large men's bars. It is great to make one bar if needed. I use it to make small amounts of different colored soaps to make ribbons or chunks.
I also keep it nearby in case I make too much M&P for my loaf. I can pour extra into the mold. I remove it, label it with the scent I used and can use again at a later time. NO waste!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Very Sturdy
• So Versatile
|
|
|
|
|
|
Brenda • New Hampshire
Date Submitted: 05/11/2014
I Recommend This Product!
|
|
"Love this Mold" |
|
COMMENTS: This is the perfect size for bar soap. I have used it for M&P and CP soaps. The bars come out of the mold with no problem. Great mold, will buy more.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Myssah Lee • Wisconsin
Date Submitted: 05/08/2014
I Recommend This Product!
|
|
"These Molds are Awesome!" |
|
COMMENTS: I've been making soap and candles now since 1998 and have only recently tried silicone molds. I must say I love these! The lines are clear and defined, my detergent free M&P soap unmolds fantastically, and each and every bar comes out super shiny--so shiny in fact that my colored, clear soaps look just like glass! I did notice the FO and/or EO fragrance still lingers even after washing but wiping each cavity with a light spritz of 91% alcohol takes care of that with no problem. I'll be buying more soon!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Anne • New York
Date Submitted: 05/08/2014
I Recommend This Product!
|
|
"My Favorite BUT..." |
COMMENTS: Love shape and size, but I have ripped two of them. Be very careful and patient removing soap.
| CC Response: | Great advice! |
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Rebecca • Wisconsin
Date Submitted: 04/27/2014
I Recommend This Product!
|
|
"Silicone Mold 1601" |
|
COMMENTS: This mold makes perfectly shaped bars of soap. If you are using a mix of oils that makes softer soap, make sure to left sit longer in mold or even put in freezer. Softer soaps were hard to get out of mold.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Linda • North Carolina
Date Submitted: 04/18/2014
I Recommend This Product!
|
|
"Another mold where one is not enough" |
|
COMMENTS: This is a high quality and durable mold. I needed this for some of my recipes and I love this larger size soap bar. I can tell that I need another one or two of these for larger or multiple batches. The soap was easy to turn out and the soap retained a good shape. The mold was easy to clean. This is a must have for basic soap making.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Sturdy good quality mold
• Easy to use
• Makes great soaps
|
|
|
|
|
|
Andrea • North Carolina
Date Submitted: 04/01/2014
I Recommend This Product!
|
|
"Nice mold for embedding and layering" |
|
COMMENTS: I love this mold for embedding my soaps. The cavities are deep enough that you can
put small plastic toys inside, especially for Easter, little ducks and chicks! Can't wait to give
these out at my church.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Ann • Oklahoma
Date Submitted: 03/18/2014
I Recommend This Product!
|
|
"So easy" |
|
COMMENTS: So easy to use silicone molds from Crafters Choice. No more struggling trying to get the soap out of the mold! No more freezer, no more pounding, no more prying.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Danielle • Alabama
Date Submitted: 03/05/2014
I Recommend This Product!
|
|
"Silicone Mold" |
|
COMMENTS: I ordered this mold for the size of the bars it would allow me to make. I was thrilled with the size of the bars. My customer said the bars were exactly the size her husband wanted as my smaller bars were not to his liking. The best part was how easy it was to get the bars to release from the mold. Liked it so much I ordered another mold with an oval shape!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• ease of release of bars
|
|
|
|
|
|
Stacey • Iowa
Date Submitted: 02/26/2014
I Recommend This Product!
|
|
"Quality!" |
|
COMMENTS: I've used this mold for several batches of MP soap. It has held up really well and appears to be sturdy. I hope it lasts as I really love this size. It molds the perfect bar of soap. I wish it held more bars but it does work great for smaller batches. It works well for our personal soap making. I have ordered more molds from this line and I look forward to trying them as well. Thanks for a quality product!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Price
• Quality
• Durability
|
|
|
|
|
|
Mary • North Carolina
Date Submitted: 02/16/2014
I Recommend This Product!
|
|
"Excellent product " |
|
COMMENTS: This is an excellent product. The soap mold is flexible enough to remove the soaps easily, but creates a soap with nice, sharp edges. The molds do need to be put on a flat surface or tray if you plan to move them while the soap is still setting. Unlike plastic molds, the flexible silicone molds will bend when you pick them up, creating folds in the top of your soap. However, the durability of the mold, the ability to withstand warmer temperatures and the ease of removing the soap make the silicone mold a better choice for molding the soap.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Durable, flexible, easy to use,
|
|
• I would like to see quantity pricing
|
|
|
|
Gay • South Carolina
Date Submitted: 01/24/2014
I Recommend This Product!
|
|
"My favorite mold" |
|
COMMENTS: This is the only mold I use for my basic soap line. This mold makes the perfect rectangular bar. My customers love the large size. It is easy to use and easy to clean up. The soap pops right out and leaves a nice smooth finish on the top of the soap. Love it!!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Tara • Minnesota
Date Submitted: 01/23/2014
I Recommend This Product!
|
|
"A Must Have Mold" |
|
COMMENTS: This is an excellent mold for all skill levels. It is easy to use, clean and unmold. It is durable and makes hearty-sized bars. It should be a staple for all mp soap creators.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Shanon • North Carolina
Date Submitted: 12/12/2013
I Recommend This Product!
|
|
"Silicone Mold 1601" |
|
COMMENTS: So easy to use with CP or rebatch soap. Have never had a problem unmolding soap with this mold. Easy to clean also.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
belinda • New Hampshire
Date Submitted: 11/19/2013
I Recommend This Product!
|
|
"Love" |
|
COMMENTS: I love all the crafters choice molds and that is all I order. I use them over and over and they hold up and work well Every time!!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Catherine • South Carolina
Date Submitted: 11/18/2013
I Recommend This Product!
|
|
"Rectangle Basic Glossy Silicone Mold" |
|
COMMENTS: This mold could not be easier to use. Love it.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Diane • Tennessee
Date Submitted: 11/15/2013
I Recommend This Product!
|
|
"Pretty smooth soaps!" |
|
COMMENTS: I bought 5 of these for my cold process soap making. I have used them several times with no problems at all. They have nice square corners and my soap unmolds easily with a beautiful shines appearance. When I have a batch that turns out too large for my loaf molds I get these out and pour in my left over. They have saved me several times..
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Kari • Nevada
Date Submitted: 10/19/2013
I Recommend This Product!
|
|
"Silicone mold is a must!" |
|
COMMENTS: I bought this mold as a first purchase when I started making my own soaps. So far I have tried, silicone, a muffin tin, copper and a few other molds. By far silicone is the BEST! It is flexible so you can pop your soap mold right out after it has cooled, no muss, no fuss, where the others you have to pry the soap out and it can get scuffed or scratched. The soap bars are pretty large, so I cut mine in half for this mold. Great purchase - I would recommend silicone molds over anything else when making soaps.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Janet • Indiana
Date Submitted: 10/06/2013
I Recommend This Product!
|
|
"Nice" |
|
COMMENTS: Soap releases easily in this mold. I also use this when I have extra left over from my loaf molds. Cleans up well too.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
|
|
• Wish you had a big one with 15-20 bars
|
|
|
|
Adrienne • California
Date Submitted: 09/14/2013
I Recommend This Product!
|
|
"Great Little Mold" |
|
COMMENTS: Used this last night and the soap popped right out. Good sized bars too. Will use this for special soap and new techniques.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Wendy • Pennsylvania
Date Submitted: 08/21/2013
I Recommend This Product!
|
|
"Awesome!" |
|
COMMENTS: I love this mold! It makes the classic bar of soap that never gets old! It is great to unmold and I give it a thumbs up!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Christina • Florida
Date Submitted: 08/04/2013
I Recommend This Product!
|
|
"Our favorite mold!" |
|
COMMENTS: This is a must have soap mold in our opinion! Very easy to work with, and the glossy finish leaves a nice smooth surface on finished soaps. The size is wonderful (very generous size when filled to the top, which makes for a nice, heavy bar that customers really enjoy) and the completely flat sides make it easy to wrap or box. The only issue we have had is that the silicone molds will trap certain strong fragrances in them, and we have to let them set with baking soda for a day every so often to get some of it out. But overall these are great, we own several and will be picking up more as well.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Carrie • Maine
Date Submitted: 07/29/2013
I Recommend This Product!
|
|
"Excellent Mold" |
|
COMMENTS: Just got this item and I am very pleased with the quality of this mold. Mold is well made, has nice deep cavities that will produce a 5 oz bar of soap. I have not used this yet. I ordered it for cold process soap making and intend to use it for decorative soaps. Great item to have on hand to do small test batches with or to make speciality soaps for family and friends. I was so impressed, I ordered another one the day this arrived. These molds are fantastic and have endless possibilities.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size of individual mold cavities
• Great product!
• Endless possibilities!!
|
|
|
|
|
|
Amanda • Illinois
Date Submitted: 07/25/2013
I Recommend This Product!
|
|
"perfect" |
|
COMMENTS: I use these all the time. They're great to work with and very easy to unmold. And now that they're glossy, my clear bars actually come out clear!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Elianys • Connecticut
Date Submitted: 06/15/2013
I Recommend This Product!
|
|
"best mold" |
|
COMMENTS: I loved this mold. the soap came out so easy plus their easy to clean. Gives the soap a nice professional look. When it came to the solid scrubs they were a breeze to take out even the difficult one. Looking forward to buying more of these in the future. Tip. place a cookie sheet underneath if your looking to move them. they become unstable. other then that there great. thanks for carrying these
|
|
PRODUCT USED IN: Soap - Melt & Pour, Exfoliants & Sugar Scrubs
|
|
|
|
|
Jarrett • Virginia
Date Submitted: 06/10/2013
I Recommend This Product!
|
|
"Endless possibilities! " |
|
COMMENTS: The possibilities are endless when it comes to this mold! I used this for Rainy Day, May Flowers, 3D Under the Sea (recipes) as well as my own ideas. Unlike other silicone molds, this one seems thin/flimsy along the sides near the corners but it is not. I have made at least 100 bars using this and it is still going strong! The only thing I would change is this mold tapers from top to bottom. Not very much, but my 2.5" round label fits perfectly on the bottom but wraps just a bit when I have to label the top side.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
|
|
• I wish it was not tapered
|
|
|
| Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information. |
 |
9 Question(s) Shown Below |
| Distributor & Drop Shipper Minimum Advertised Pricing |
As a Crafter’s Choice Distributor and/or Drop Shipper you have agreed to abide by the following Minimum Advertised Price (MAP) for each product and price level. You are permitted to advertise products at a higher price. You may not advertise the products at a lower price. Below you will find the MAP for this product.
|
|
|
|
|
