|
|
Regular Loaf Silicone Mold 1501 |
The requested content cannot be found 1 / 3 Regular Loaf Silicone Mold 1501
|
|
 |
Additional
Information |
|
Directions &
Ingredients |
|
SDS &
Documents |
|
|
Our most popular mold. This traditional loaf makes eight one-inch slices of soap, and the loaves will fit in Crafter's Choice Mitre Box for easier slicing.
Country Of Origin: China
|  | This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a). |
|
|
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.
Directions:
Melt & Pour Soap: Pour melted soap into silicone mold. Allow soap to cool at room temperature until hard. Carefully remove loaf from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the loaf and carefully pull out of the mold. Slice into bars.
Cold Process Soap: Pour soap at trace into mold. After at least 24 hours, gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface or cookie sheet and gently push on the bottom of mold until the soap starts to release. Grab hold of the loaf with a gloved hand. Slice into bars and allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Cold Process/Oven Process Soap: Pour soap at trace into the mold. Preheat oven to 170ºF then place mold in oven. Turn oven off, and keep soap in oven overnight. The next day remove mold from oven. Carefully remove loaf from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Slice into bars, and allow soap to cure for 2 to 4 weeks.
Hot Process Soap: Scoop hot process soap into mold. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Carefully remove loaf from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the loaf and carefully pull out of mold. Slice into bars.
Care:
Hand wash mold in warm, sudsy water.
| Average Customer Rating: |
 |
(409 Reviews) |
|
Tina • Pennsylvania
Date Submitted: 11/06/2020
I Recommend This Product!
|
|
"Bomb Diggity!" |
|
COMMENTS: I have a lot of molds, but this mold is a favorite.
The somewhat clearness of the silicone allows for some visual of your project. *Adds to the excitement!
The loaf is perfectly rectangular. I cut 7 bars at 4 + 0z,(I'm sure that's due to my bad cutting.)
A great addition to any collection.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Clear see-through color
• Sturdy material
• Size and number of bars
|
|
|
|
|
|
Maurette • Idaho
Date Submitted: 11/15/2019
I Recommend This Product!
|
|
"Great sturdy mold" |
|
COMMENTS: My husband got 2 of these molds for me several years ago. They have been used a lot and are very sturdy. I use them for cold process goat milk soap and occasionally a batch of hot process soap. They are nice because I don't have to line them with plastic and the sides of my soap come out really even and straight.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy to use
• Last a long time
|
|
• Nothing
|
|
|
|
Jen • California
Date Submitted: 06/01/2019
I Recommend This Product!
|
|
"Great product" |
|
COMMENTS: Perfect size for 8 1" bars. Nonstick surface, I love it
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Amy • Minnesota
Date Submitted: 03/20/2019
I Recommend This Product!
|
 |
"Works great" |
|
COMMENTS: It works great. Worth every penny
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Tracy • Massachusetts
Date Submitted: 01/31/2019
I Recommend This Product!
|
|
"Perfect " |
|
COMMENTS: Makes the perfect batch of soap!!
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
VIDIA • New York
Date Submitted: 01/21/2019
I Recommend This Product!
|
|
"I recommend this product" |
|
COMMENTS: This soap mold is perfect,this is a must buy product.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• easy to use
|
|
• nothing
|
|
|
|
Tammy / Todd • California
Date Submitted: 01/19/2019
I Recommend This Product!
|
|
"Regular Loaf Mold" |
|
COMMENTS: This is one of my favorite molds ever. Couldn't do without it
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Kimberly • Florida
Date Submitted: 12/09/2018
I Recommend This Product!
|
|
"Regular Loaf Mold 1501" |
|
COMMENTS: I love this mold ! Makes the perfect size soap that I slice. The sides are reinforced, so there is no bowing, washes easily and it is a work horse.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Regina • Pennsylvania
Date Submitted: 11/14/2018
I Recommend This Product!
|
|
"Great mold!" |
|
COMMENTS: Love this mold. Very firm and well made. Great for soap making.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Well Made.
• Holds shape
|
|
• Nothing
|
|
|
|
Corrina • Kentucky
Date Submitted: 10/19/2018
I Recommend This Product!
|
|
"Super easy" |
|
COMMENTS: Loved it! Super easy to use, the soap came right out without any trouble. Super easy clean up too!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Nerissa • Florida
Date Submitted: 06/15/2018
I Recommend This Product!
|
|
"Easy To Use, Exceptional Quality" |
|
COMMENTS: I have had this mold from 2015 this mold is very durable and easy to use. Unmold both CP and MP soaps a very easy. I would suggest for anyone to buy this mold
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Lotions, Creams & Butters
|
|
|
|
|
Gina • California
Date Submitted: 06/03/2018
I Recommend This Product!
|
|
"Great for newer soapers!" |
|
COMMENTS: I'm brand new to soaping, and decided to get this Crafter's Choice Regular Loaf Silicone Mold to use for my first cold process soap loaf. I liked how it seemed sturdy enough for just the mold itself, without having to need a separate wood mold to keep the shape. This was important to me because as a new soaper, I'd like to keep my costs low as I begin to stock up on the basic tools I need. This was the perfect mold for my first loaf! The soap loaf was very easy to remove from the mold, and the shape held up just wonderfully. I'm gonna get some more of these so I can make a couple different recipes at a time. I'm so happy with this purchase!
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Ease of removing soap loaf
• Shape held up perfectly!
|
|
• Nothing
|
|
|
|
Diana • Texas
Date Submitted: 05/24/2018
I Recommend This Product!
|
|
"perfect size" |
|
COMMENTS: I really liked this mold it's perfect
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• size
• thick
|
|
|
|
|
|
Jessica • New York
Date Submitted: 05/08/2018
I Recommend This Product!
|
|
"Very Sturdy!" |
|
COMMENTS: I thought this would be kind of flimsy when I bought it, but no, it stands on it's own and is made of a thick silicone.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Cam • North Carolina
Date Submitted: 04/12/2018
I Recommend This Product!
|
|
"I need an army of these!" |
|
COMMENTS: This little guy is perfect for my needs. I have two of them and will be purchasing more in the near future. They don't bow out in the middle, they don't hold scent after the soap is unmolded, and they are ridiculously easy to clean. I would love for it to be a couple inches longer & hold another ounce or two, but I'm definitely not going to complain about that. The price is great and it's a beautiful product.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• No bowing in the middle
• Easy clean-up
• Doesn't hold scents from soap batches
|
|
• Tiny bit bigger
|
|
|
|
Mom’s House • Missouri
Date Submitted: 04/10/2018
I Recommend This Product!
|
|
"Great mold" |
|
COMMENTS: As a new hobbyist soaper, this is great. It's a good size and the sides stay straight when full without additional support. Soap releases well but I do recommend sodium lactate or it may be a bit sticky (been there). No staining after multiple uses.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Jacalyn • Wisconsin
Date Submitted: 04/05/2018
I Recommend This Product!
|
|
"Crafters Choice™ Regular Loaf Silicone Mold 1501 " |
|
COMMENTS: Nice mold but it does NOT hold 44 ounces as stated in the description...more like 28 oz of oils.
|
|
PRODUCT USED IN: Soap - CPOP
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Nice for making smaller batches
• Study
|
|
• correct description re: oz amount
|
|
|
|
Omni • North Dakota
Date Submitted: 01/18/2018
I Recommend This Product!
|
|
"Hands down my favorite mold" |
|
COMMENTS: This is the best mold for small one and done batches! I get 8 1' bars and is perfect for some of my wholesale customers
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Shampoo Bars, Lotion Bars & Sticks
|
|
|
|
|
teddybear • Iowa
Date Submitted: 01/12/2018
I Recommend This Product!
|
|
"This Is awesome" |
|
COMMENTS: This is awesome
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Ms. • New York
Date Submitted: 01/03/2018
I Recommend This Product!
|
|
"Soap mold" |
|
COMMENTS: Really love this mold! Love the shape my bars come out and it is easy to work with.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Everything
|
|
• Nothing
|
|
|
|
Kristina • Virginia
Date Submitted: 12/11/2017
I Recommend This Product!
|
|
"Amazing Mold! " |
|
COMMENTS: This was the perfect mold for me as I started making cold process soap. It's durable, sturdy and easy to wash! I didn't have any bowing. It held the soap batter perfectly. I will definitely but more.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy to wash
• Sturdy
• Durable
|
|
|
|
|
|
Danielle • Pennsylvania
Date Submitted: 12/07/2017
I Recommend This Product!
|
|
"Love it! " |
|
COMMENTS: Makes perfect soap loaves, and is easy to remove. You can see through it a little bit - not enough to see similar color swirls, but enough to see thickness of layers.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Marie • Washington
Date Submitted: 12/05/2017
I Recommend This Product!
|
|
"Mold 1501 Capacity" |
|
COMMENTS: This mold is excellent in terms of its sturdiness and quality. It holds up very well without buckling or warping. It was my first purchase of a silicone loaf mold of its kind and I used it to make some Melt & Pour soap. It was great! The only problem I have is the maximum capacity. Based on the product description, it says it holds 44 ounces, which would be 2.75 pounds. This is incorrect! This mold only holds a maximum capacity of 32 ounces, which is 2 pounds. This was very disappointing for me because the batch I made was based on the 44 ounces listed in the product description. I think this needs to be corrected on the website to reflect a more realistic/truthful value. Luckily, this is M&P, so I can salvage the extras. I still give this mold a 5-star review because it truly is a fantastic mold and I will be purchasing some more.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Sturdiness, quality, and make.
|
|
• Increase the capacity to 3 lbs
|
|
|
|
Laura • North Carolina
Date Submitted: 11/28/2017
I Recommend This Product!
|
|
"Crafter's Choice regular silicone loaf mold 1501" |
|
COMMENTS: Love this size for my soap bars. Makes a nice large bar and unmolds easily. Excellent size for a beginner and I can try different swirling and artistic designs.
|
|
PRODUCT USED IN: Soap - CPOP
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Sturdy construction prevents any bowing.
• Spines on sides show where bars are cut.
• Size is easy to work with.
|
|
• Nothing.
|
|
|
|
DaniK • Idaho
Date Submitted: 11/17/2017
I Recommend This Product!
|
|
"Best mold ever!" |
|
COMMENTS: I LOVE this mold perfect size for smaller batches (8 Bars) and it doesn’t need to be supported to keep its shape and has super easy release.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
sharon • Georgia
Date Submitted: 11/10/2017
I Recommend This Product!
|
|
"cold process soap" |
|
COMMENTS: I have one line of soap made strictly with essential oils only and uniformity in shape and size is very important to achieve a higher end look. I use this mold only for this particular line.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• sturdiness
• how well it shapes my soap
• easy to unmold
|
|
• nothing
|
|
|
|
Mahaley • Louisiana
Date Submitted: 10/30/2017
I Recommend This Product!
|
|
"Great Mold" |
|
COMMENTS: Love this mold! Sturdy, cleans easily. Holds my small batch recipe perfectly!
|
|
PRODUCT USED IN: Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• How sturdy it is
|
|
• Nothing
|
|
|
|
Amy • Virginia
Date Submitted: 10/28/2017
I Recommend This Product!
|
|
"Love this mold" |
|
COMMENTS: The mold is a perfect size, and the soap just falls out, but I did have to put it in the freezer for about 30 minutes and it released very easy. I thought it looked bigger in the picture, but it is still a perfect size for my projects, because I am just starting out. It makes 8 - 1 inch bars, and it holds a little over 2 pounds, I put 28 ounces of oils in my recipe and it was perfect.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• easy to use, not to bulky
• soap releases very easy
• great for small projects
|
|
• nothing
|
|
|
|
Shari • Indiana
Date Submitted: 10/25/2017
I Recommend This Product!
|
|
"1501 Silicone Mold" |
|
COMMENTS: This mold took my soaps from nice to lovely. No bulging sides from floppy poorly made molds. It's very sturdy. I have 2 need another one. Bigger mold is much too big for what I do.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Sturdy
• See thru
|
|
|
|
|
|
Spencer • Pennsylvania
Date Submitted: 10/15/2017
I Recommend This Product!
|
|
"Love!" |
|
COMMENTS: I absolutely love this mold. The sides are reinforced well, so I didn't get bowed sides like with my other, cheaper mold. The soap was extremely easy to remove.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• well made
• easy to remove soap
• sturdy
|
|
|
|
|
|
Yeliena • Ohio
Date Submitted: 10/14/2017
I Recommend This Product!
|
|
"Great product" |
|
COMMENTS: This mold is easy to use, it is very sturdy, the sides do not bow out. The bars come out the same size as my wooden mold, so it works out great.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP, Soap - Hot Process, Soap - Shampoo Bars
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• easy to handle
• nice size
• sturdy
|
|
• nothing
|
|
|
|
Barbara J • Ohio
Date Submitted: 09/09/2017
I Recommend This Product!
|
|
"Regular Loaf Silicone Mold (1505)" |
|
COMMENTS: These are SO handy. Don't have to fight to get my soaps out of the mold. The only time I've lost a corner is when I get impatient and the soap is still a little to soft. My bad ~
|
|
PRODUCT USED IN: Soap - CPOP, Soap - Hot Process
|
|
|
|
|
Sharon • Texas
Date Submitted: 09/04/2017
I Recommend This Product!
|
|
"Silicon Loaf" |
|
COMMENTS: Easy to use and soap pops right out!! Love!!
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
|
|
|
|
|
Cheyenne • California
Date Submitted: 08/17/2017
I Recommend This Product!
|
|
"Regular Silicone Mold" |
|
COMMENTS: This was the first mold I ever used as a newbie and it worked great for me!
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Julie • Indiana
Date Submitted: 08/12/2017
I Recommend This Product!
|
|
"Great mold " |
|
COMMENTS: As someone still new to soap making get to g ready to graduate from no to do soon I loved this mold and thin it will be a great starter for me for cp also
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size and ease of use
|
|
• Change nothing. It's great
|
|
|
|
Tracy • Ontario
Date Submitted: 08/03/2017
I Recommend This Product!
|
|
"Love this soap mold!!" |
|
COMMENTS: I make CP soap and I love this silicone mold! the soap removes cleanly and easily from the mold, it is a great size and the mold cleans up perfect. I have many of these molds, they are my favorite!
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy to remove soap
• Easy to clean the mold after use
• Doesn't need additional support on sides
|
|
|
|
|
|
Pennie • Maine
Date Submitted: 07/25/2017
I Recommend This Product!
|
|
"Best silicone Loaf Molds" |
|
COMMENTS: I love these Molds, they hold up very well. I have had mine for over a year now. With Hundreds of soaps made using them they do not retain scent and are sturdy. Cleaning is a breeze with some hot soapy water. I have saved on freezer paper as I don't need any liner!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size
|
|
|
|
|
|
Monica • North Carolina
Date Submitted: 07/17/2017
I Recommend This Product!
|
|
"Love this mold" |
|
COMMENTS: I've been using this mold for a couple of years and I love them. I purchased e few more while they were on sale. I recommend this product.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Hot Process
|
|
|
|
|
Sophie • Arkansas
Date Submitted: 07/06/2017
|
 |
"buyer" |
|
COMMENTS: first time making soap did not know about molds I felt this mold is small for your reg. batch of soap
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Diane • Missouri
Date Submitted: 06/13/2017
I Recommend This Product!
|
|
"Love it!" |
|
COMMENTS: Love it for mixed colored soaps!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Everything
|
|
• Nothing
|
|
|
|
Mary • New York
Date Submitted: 06/09/2017
I Recommend This Product!
|
|
"Great product!" |
|
COMMENTS: Great quality mold! I love using this to make smaller batches, the soap releases beautifully and they are quite sturdy, I also have the mini silicone loaf mold for test batches and it is great too!
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Jody • Michigan
Date Submitted: 06/02/2017
I Recommend This Product!
|
|
"Wonderful!" |
|
COMMENTS: I am new to soap making and decided to take the plunge after watching numerous videos. I knew I needed a loaf mold to create what I was envisioning. Everything about this mold is perfect. Strong, sturdy (sides did not bulge) easy to unmold and cleaning was a breeze. I will defiantly order more of these!!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size
• Sturdy
• Easy unmold
|
|
• Not a thing!
|
|
|
|
Lady Diannaly • Texas
Date Submitted: 05/31/2017
I Recommend This Product!
|
|
"Great product" |
|
COMMENTS: I'm happy with all Crafter's Choice molds I purchased. This truly has changed the way I make my soaps. It isn't too bulky, perfect size for my current operation.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Lisa • North Carolina
Date Submitted: 05/27/2017
I Recommend This Product!
|
|
"Perfect!" |
|
COMMENTS: Loved the first batch of soaps I made using this mold!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Everything
|
|
• Nothing
|
|
|
|
Sharon • Utah
Date Submitted: 05/23/2017
I Recommend This Product!
|
|
"Good loaf size" |
|
COMMENTS: A good size for loafs, do tend to stretch over time. I have several and no 2 have an exact 8 inch inside dimension.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Randi Jowers • Maine
Date Submitted: 05/05/2017
I Recommend This Product!
|
|
"excellent" |
|
COMMENTS: Excellent. I always freeze my loaves before unmolding and these perform admirably.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Ramona • Michigan
Date Submitted: 04/25/2017
I Recommend This Product!
|
|
"Silicone Loaf Mold" |
|
COMMENTS: Sides are much stronger than the previous loaf mold. Soap releases easier too.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Peggy • Delaware
Date Submitted: 04/22/2017
I Recommend This Product!
|
|
"Regulat loaf silicone mold" |
|
COMMENTS: Love this mold! The soap fits very well in the soap cutter. Definitely will order more!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Rachelle • Arkansas
Date Submitted: 04/17/2017
I Recommend This Product!
|
|
"Sturdy and just the perfect size" |
|
COMMENTS: These molds are tough and last a long time. I will be ordering more.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Edina • California
Date Submitted: 03/29/2017
I Recommend This Product!
|
|
"Soap loaf" |
|
COMMENTS: Love it.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
kaye • Utah
Date Submitted: 03/22/2017
I Recommend This Product!
|
|
"MUST HAVE" |
|
COMMENTS: I do not know how I lived this long without this. It is very stable. Does not bow at all. Super easy to peel off the soap for removal. I am in LOVE. My job just got 10 times easier. I will be buying more.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Everything
|
|
|
|
|
|
Rhonda • California
Date Submitted: 03/16/2017
I Recommend This Product!
|
|
"LOVE THIS MOLD! " |
|
COMMENTS: I LOVE THIS MOLD! IT IS PERFECT FOR MAKING SMALLER COLD PROCESS SOAPS AND FOR THOSE OF US THAT ARE JUST STARTING OUT AND STILL IN THE LEARNING STAGES.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• PERFECT SIZE
|
|
• NOT A THING.
|
|
|
|
Shirley • Pennsylvania
Date Submitted: 03/11/2017
I Recommend This Product!
|
|
"I recommend this mold" |
|
COMMENTS: Delivery was fast, I like this mold it's easy to use & very sturdy.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Ginger • Kentucky
Date Submitted: 03/08/2017
I Recommend This Product!
|
|
"Regular Loaf" |
|
COMMENTS: Great! Sturdy!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Helana • Ohio
Date Submitted: 03/05/2017
I Recommend This Product!
|
|
"great mold" |
|
COMMENTS: This was so easy to use as a beginning soap maker. It was awesome for melt and pour and its still awesome with cp soap as well.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• easy to unmold
• doesn't stain
• easy to clean
|
|
|
|
|
|
Joanna • Pennsylvania
Date Submitted: 03/02/2017
I Recommend This Product!
|
|
"Love these molds!!" |
|
COMMENTS: I'm so happy to finally have one of these molds! This one and the tall and skinny have saved me so much time and frustration, I'm definitely ordering more!!
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Excellent quality
• Saves so much time
• Saves money
|
|
|
|
|
|
Angela • North Carolina
Date Submitted: 02/28/2017
I Recommend This Product!
|
|
"I love this little mold!" |
|
COMMENTS: This mold is perfect for beginning soap makers. It is small enough for test batches, but I still get 7 nice bars of soap. My soap unmolds easily and perfectly.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size
• How easy it is to unmold soap
|
|
• Nothing
|
|
|
|
Conrad • Colorado
Date Submitted: 02/19/2017
I Recommend This Product!
|
|
"Excellent " |
|
COMMENTS: A very sturdy mold that stand up all on its own.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Kaylynn • Ohio
Date Submitted: 02/18/2017
I Recommend This Product!
|
|
"Great small mold" |
|
COMMENTS: I'm so happy that I bought this mold. It's great for making small batches and for testing out new recipes. It's sturdy, yet flexible, and is really easy to use.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Amy • New Mexico
Date Submitted: 02/03/2017
I Recommend This Product!
|
|
"Great Mold" |
|
COMMENTS: I love this mold. It is sturdy and needs no additional support. It is durable and easy to clean. I wish it came in a longer size like 10 to 12 inches long for larger batches. I plan to buy several more of these molds.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Durability
• Does not require additional support
• Price!!!
|
|
• To have longer molds with a larger capac
|
|
|
|
Camille • Michigan
Date Submitted: 01/27/2017
I Recommend This Product!
|
|
"Five stars" |
|
COMMENTS: Great basic mold. Easy to use and very sturdy.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Theresa • Tennessee
Date Submitted: 01/26/2017
I Recommend This Product!
|
|
"Wonderful mold" |
|
COMMENTS: Very thick and sturdy, Soap comes right out.I will be ordering more!
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Thick & Heavy and soap dosen't stick
|
|
• Nothing
|
|
|
|
DeShawn • Florida
Date Submitted: 01/18/2017
I Recommend This Product!
|
|
"These molds are GREAT!" |
|
COMMENTS: Excellent mold, great release for both glycerin and cold process soaps.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• durability
• easy release
|
|
• nothing
|
|
|
|
Julie • Virginia
Date Submitted: 01/12/2017
I Recommend This Product!
|
|
"loaf mold" |
|
COMMENTS: easy to remove soap
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• ease of use
• price when buying in bulk
|
|
|
|
|
|
aboyepe • Nevada
Date Submitted: 01/04/2017
I Recommend This Product!
|
|
"Sturdy" |
|
COMMENTS: i own 6 of these moulds and they get used very often. i cant resist going back to them and plan to buy more. i find that they bow a little with my dense hp soaps but not so with cp. neat release and a breeze to clean.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
|
|
|
|
|
Isabel • Rhode Island
Date Submitted: 12/26/2016
I Recommend This Product!
|
|
"Perfect!" |
|
COMMENTS: Nice size and easy to unmold cp, mp, and hp soap. I need more of these.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Hot Process
|
|
|
|
|
Alecia • Virginia
Date Submitted: 12/07/2016
I Recommend This Product!
|
|
"Love it" |
|
COMMENTS: A must have
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Dvorak • Maryland
Date Submitted: 12/05/2016
I Recommend This Product!
|
|
"Great silicone mold" |
|
COMMENTS: Smaller then my usual silicone mold but it will do. The one I had before this one made 10-1 inch perfect bars. This one is not as big but I should have read the information more closely. Still a great mold that is sturdy and holds up to the heat in my milk soaps
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Sturdy
• Soaps release easily
|
|
• Wish it came in a bigger size
|
|
|
|
Heather • Mississippi
Date Submitted: 11/30/2016
I Recommend This Product!
|
|
"Best mold!" |
|
COMMENTS: This is the best mold I have used. I have made dozens of batches using these molds and have never had a problem. Perfectly sized for smaller batches. Easily releases soap.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Linda • New York
Date Submitted: 11/21/2016
I Recommend This Product!
|
|
"My best mold." |
|
COMMENTS: This is the best mold I have used so far. It is strong and easy to remove the soap. It was as if the mold was greased because it came out so easily. I love it.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Ease of removing soap!
|
|
• nothing
|
|
|
|
Rachel • Oregon
Date Submitted: 11/21/2016
I Recommend This Product!
|
|
"My favorite mold" |
|
COMMENTS: I have a small collection of these now. I really like the interior dimensions. The mold is sturdy, stable and easy to use. No lining, releases easily and I can even pop it in the dishwasher, if I want. I usually prep a large batch of soaping oils, split it up, and color/ fragrance/pour each.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Michelle • New York
Date Submitted: 11/20/2016
I Recommend This Product!
|
|
"Wonderful mold" |
|
COMMENTS: I LOVE THIS MOLD!!! It is a bit smaller then what I use currently using a big log wood mold. The wood mold I have to line all the time plus they do break over time I have them for a while! This mold here I just bought a few of them well more, I make a huge batch of soap and then I separate the batch to all different types of soaps then just like that I have 10 different soaps from making one huge batch and using 10 molds. They come out super easy no lining!! LOVE
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• NO LINING
|
|
|
|
|
|
Darlene • Tennessee
Date Submitted: 11/16/2016
I Recommend This Product!
|
|
"Great silicone mold!" |
|
COMMENTS: Love this mold...I have used it so many times when I need a smaller batch of soap. Holds up very well and cleans up well also! Very durable and holds it shape well! I have several of these and would purchase again if I needed more!
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
karen • Alberta
Date Submitted: 11/12/2016
I Recommend This Product!
|
|
"love this loaf mold" |
|
COMMENTS: strong, durable, makes perfect loaves
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Heather • Kentucky
Date Submitted: 10/15/2016
I Recommend This Product!
|
|
"Great mold" |
|
COMMENTS: Love this mold. Sturdy, easy to clean, soap slides right out with little pressure. Great to test out new recipes!
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Becki • Washington
Date Submitted: 10/13/2016
I Recommend This Product!
|
|
"Great mold, everyone should have a couple" |
|
COMMENTS: This mold works very well. Easily holds two pounds of soap with a little room to spare. Mold holds it's shape very well, with little to no bowing. If I use a hard recipe or sodium lactate, soaps unmold very easily. If it's a soft recipe with no sodium lactate, it is a little more difficult and it is inclined to stick. Recommend with harder recipes and/or sodium lactate. Everyone should have a couple of these.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Holds shape
• Releases soap well
• No lining
|
|
• Nothing, works great
|
|
|
|
desirae • Virginia
Date Submitted: 10/11/2016
I Recommend This Product!
|
|
"Finally the prefect size mold" |
|
COMMENTS: I've been looking for several weeks for a mold that's wide enough but not to deep and have wasted so much money buying didn't ones online only to find something about it I didn't like, but this one, I finally found exactly what I was looking for, I was surprised about how durable it is, rather then the flimsy ones I've bought before which caused my soap to end up bowing out.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Durable yet flexible
• Perfect width & depth
|
|
|
|
|
|
Pamela • Oklahoma
Date Submitted: 10/05/2016
I Recommend This Product!
|
|
"Sturdy and stable" |
|
COMMENTS: Love these molds perfect loaf size for personal use.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
corena • Oklahoma
Date Submitted: 10/04/2016
I Recommend This Product!
|
|
"Regular loaf soap mold" |
|
COMMENTS: Very easy to release my soap.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Kelly M • Nevada
Date Submitted: 09/26/2016
I Recommend This Product!
|
|
"My Favorite Mold" |
|
COMMENTS: I find myself reaching for this mold always. It doesn't bow and holds up perfectly fine in the oven. Soap processes evenly and comes out quite easily when finished. For some reason hot processed soap turns out smoother in this mold. I love it. Very easy to clean. Scent doesn't stick and color doesn't stain.
|
|
PRODUCT USED IN: Soap - CPOP, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Sturdy
• Easy to clean
|
|
|
|
|
|
Jamie • Texas
Date Submitted: 09/24/2016
I Recommend This Product!
|
|
"My Favorite Mold of All Time" |
|
COMMENTS: This mold is my favorite mold of all time and I will use this before I use any other molds. It is the perfect size to produce 8 1-inch bars. I used this for M&P and it was very easy to come out of the mold. I also really like how you can see through the silicone a little bit on the side to see how your colors look on the sides.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Jennmadden82 • Kentucky
Date Submitted: 09/03/2016
I Recommend This Product!
|
|
"Excellent" |
|
COMMENTS: These are my favorite molds. They've lasted so long without losing shape and they're easy to unmold, clean and just all around excellent!
|
|
PRODUCT USED IN: Soap - Hot Process
|
|
|
|
|
Jamie • Virginia
Date Submitted: 08/04/2016
I Recommend This Product!
|
|
"Perfect mold" |
|
COMMENTS: Durable mold, easy to clean and use.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP, Soap - Hot Process, Soap - Shampoo Bars
|
|
|
|
|
sheabutter36 • Michigan
Date Submitted: 07/29/2016
I Recommend This Product!
|
|
"Sturdy" |
|
COMMENTS: Sturdy but flexible when needed.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Hot Process
|
|
|
|
|
MARLENY • California
Date Submitted: 07/20/2016
I Recommend This Product!
|
|
"love this mold" |
|
COMMENTS: I love this soap mold, I had to buy more. The sides are sturdy and don't bow out(something I hate) It is a bit difficult at times to unmold but give it a few days or place soap in freezer for a while and soap will come out easy.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
JACQUELYN • Kansas
Date Submitted: 06/30/2016
I Recommend This Product!
|
|
"Silicone mold" |
|
COMMENTS: I love your molds. Great with my soap creations
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Tami • California
Date Submitted: 06/27/2016
I Recommend This Product!
|
|
"Large Loaf" |
|
COMMENTS: The quality on this mold is so good. I have bought a cheaper one from another website that bowed and bulged on the sides when used. This may be more expensive, buy its well worth the money!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Mary • Ohio
Date Submitted: 06/23/2016
I Recommend This Product!
|
|
"Great" |
|
COMMENTS: Loaf comes out easily - very little effort. Lovely.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Cierra • Georgia
Date Submitted: 06/13/2016
I Recommend This Product!
|
|
"Good Silicone Mold" |
|
COMMENTS: This is a good silicone mold for beginners like myself. The only thing I did not like about this product is that it is very hard to get out of the mold because of the thick silicone. The upside is because it is made of thick silicone it will not rip or tear on you easily. I have used it a few times and I am very happy with the product.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Lisa • Michigan
Date Submitted: 05/30/2016
I Recommend This Product!
|
|
"Best soap mold ever!" |
|
COMMENTS: It never fails to make beautiful bars of cold process soap with straight sides and easy to remove.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Loraine • Pennsylvania
Date Submitted: 05/30/2016
I Recommend This Product!
|
|
"Works well" |
|
COMMENTS: Great mold, especially the size, this is all I really need for small batches of soap. I do reinforce the sides but that isn't a problem, I normally wrap my molds anyway.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Great size, easy release
|
|
|
|
|
|
Mary • Colorado
Date Submitted: 05/28/2016
I Recommend This Product!
|
|
"Love this Mold" |
|
COMMENTS: This mold is very sturdy. The soap comes out easily. The mold cleans easily. The mold is a great size. Just love it. We use this mold whenever possible Our go to mold
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy clean
• Easy Unmold
|
|
|
|
|
|
Jennifer • Maine
Date Submitted: 05/10/2016
I Recommend This Product!
|
|
"Excellent heavy duty mold" |
|
COMMENTS: These are great stand alone molds. No bowing on the sides when you put your soap in. They are fairly easy to unmold although I had a little bit of my soap chip off the corners when I was unmolding it. Great fir CPOP as you can see if the soap has gelled in the corners and on the bottom.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP, Soap - Hot Process, Soap - Shampoo Bars
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Sturdy,no bowing
• Clear and easy to see soap
|
|
• Make the sides a bit easier to unmold
|
|
|
|
karen • New York
Date Submitted: 05/04/2016
I Recommend This Product!
|
|
"mold mold mold " |
|
COMMENTS: I use this in my cold process soaps very sturdy
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Stacie • Wisconsin
Date Submitted: 04/30/2016
I Recommend This Product!
|
|
"My favorite Loaf Mold" |
|
COMMENTS: Any soap mold from Crafter's Choice is well made and intended to last for many years. The description for this product is exactly true: the mold does hold 8 full-size soap bars. (roughly 40 ounce total mold capacity.) The sides are reinforced, so they don't bow out when full. The mold holds its shape and has nice square corners. The only thing I'd caution about is that your batter will want to gel in the center unless you immediately put it into the freezer after pouring. Otherwise you'll end up with a half-gelled soap. Or otherwise, you can force a gel phase on the whole loaf by setting a heating pad under it, setting a box over the mold, then covering it with blankets. Turn off the heating pad after an hour, then leave it alone for a few more hours. This will allow the whole loaf to gel, so the color and consistency of your soap is the same throughout the loaf.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• durability
• reinforced sides
• size
|
|
• be careful that your soap will gel
|
|
|
|
Alex • North Carolina
Date Submitted: 04/19/2016
I Recommend This Product!
|
|
"Very sturdy" |
|
COMMENTS: Sides are well reinforced so no issues with bowing or warping
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Sarah • Virginia
Date Submitted: 04/16/2016
I Recommend This Product!
|
|
"Awesome mold!" |
|
COMMENTS: Love this mold for CP and M&P! The silicone is sturdy and I expect it to last a long time! I would buy again!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
|
|
• More transparent
|
|
|
|
Michele • Virginia
Date Submitted: 04/12/2016
I Recommend This Product!
|
|
"Awesome Product" |
|
COMMENTS: Love this mold! It is VERY sturdy and makes for easy moving. Washes up wonderfully! Would highly recommend.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
lupe • Arkansas
Date Submitted: 04/09/2016
I Recommend This Product!
|
|
"I was really excited!!!!! " |
|
COMMENTS: Love the Mold. Does everything I need it to Do!!!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Awesome Shape!!!
|
|
|
|
|
|
Leslie • Ohio
Date Submitted: 04/07/2016
I Recommend This Product!
|
|
"Great Product" |
|
COMMENTS: My old mold broke and I purchased this one, hoping that I didn't have any issues with it bowing out like some of the reviews have said. So far so good! The bar that it produces is perfectly rectangular, no bulging anywhere, and I didn't have to shore it up with books. (I did anyway first use, just as a precaution.) The only complaint I have is that it's difficult to unmold, no matter how long I let my MP sit.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• size of bars that it produces
|
|
• difficult to unmold
|
|
|
|
Karen • Washington
Date Submitted: 04/06/2016
I Recommend This Product!
|
|
"Love The Size And Capacity" |
|
COMMENTS: This mold makes perfect sized bars when sliced into 1" bars, and I don't have to make a huge batch to fill it. I love that about it. My favorite thing to make in it is swirly bars. So much fun and the anticipation of what they will look like cut is even better. This mold is so easy to un-mold the bar. Going to get more of these!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Perfect Size For Smaller Batches
• Easy To Unmold
|
|
|
|
|
|
Jennifer • Kansas
Date Submitted: 04/03/2016
I Recommend This Product!
|
|
"Great for small batches." |
|
COMMENTS: I love wood molds best but this one is great for small batches. Another plus is that I don't have to line this one!
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy to use.
|
|
|
|
|
|
Tonya • West Virginia
Date Submitted: 04/02/2016
I Recommend This Product!
|
|
"Highly Recommend" |
|
COMMENTS: I am a new soaper, only having started a little over a year ago. I make for friends and family mostly. I started out with a hard mold from a craft store. I had been wanting to move to a silicon mold so I bought one from another site. Big mistake. It was flimsy and the soap came out misshapen. During a sale on this site, I took a chance and bought 2 of this one. WOW! I will never use my old molds again!!! Perfect shape. Durable and sturdy. You won't be disappointed I promise!
|
|
PRODUCT USED IN: Soap - Hot Process
|
|
|
|
|
Elianys • Connecticut
Date Submitted: 04/01/2016
I Recommend This Product!
|
|
"best mold ever" |
|
COMMENTS: I have a lot of molds, but this one is wonderful. No bowing on the sides and I fill this mold to the top. Love how I get clean soaps. Looking forward to getting another
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Jennifer • Minnesota
Date Submitted: 03/31/2016
I Recommend This Product!
|
|
"Great Mold" |
|
COMMENTS: Loved this mold! Plan on buying more.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Tammy • Nevada
Date Submitted: 03/15/2016
I Recommend This Product!
|
|
"I love these molds!!!!!" |
|
COMMENTS: These molds are so easy to work with! I use to line wood molds with clear trash bags and I hated the lines and I had no patience to cut paper to line my molds each time. Problem solved with these molds, they release the soap with perfect ease and clean very quick. I have bought five and I am buying another five today!!
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Cynthia • Ohio
Date Submitted: 03/14/2016
I Recommend This Product!
|
|
"my favorite new mold" |
|
COMMENTS: I purchased this for a special project and I couldn’t be happier! I love this mold! My old loaf mold buckled and bowed and my other one was impossible to get the soap out of. I would definitely recommend this mold to anyone. Plan on using for CP this summer.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Dianne • North Carolina
Date Submitted: 03/11/2016
I Recommend This Product!
|
|
"I Can See ! " |
|
COMMENTS: I love soaping with these molds. I ordered 2 because I love doing CPOP. With this mold I am able to see what stage my soap is at all times. With it being somewhat clearer then others, I can see if it is gelling all the way to the sides and corners. This mold was a little difficult to unmold, but like all molds each one has it temperaments. After using this mold, I found this molds way of wanting to release. I am glad I bought 2 right up front, because I like to make 2 loafs at a time. If my oven goes on...I might as well make the best of my time.
ONLY WISH is that it was totally clear. Maybe one day someone will develope a clear mold that can be put in the oven. As "Acrylic" at this time can not.
I would recomend this mold. I did not buy one when I first started soaping because I bought the cheaper flexible silicone molds.
This one has a very sturdy sides to minimize bowing. If you do not over mold it, you will not have any bowing problems.
I use this in all my CP, HP, CPOP, and MP soaping!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP, Soap - Hot Process, Soap - Shave Shampoo, Lotion Bars & Sticks
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• CP SOAPING
• Hp soaping
• CPOP soaping
|
|
• make it more clear, see through.
• Offer discount in multiple buys!
|
|
|
|
Traci • North Carolina
Date Submitted: 03/09/2016
I Recommend This Product!
|
|
"Fantastic!" |
|
COMMENTS: Such a great mold! The soap slides out with lovely crisp corners. Ordering 2 more
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Slides out easily
|
|
• I wish it was a scootch longer
|
|
|
|
Amberine • South Africa
Date Submitted: 03/04/2016
I Recommend This Product!
|
|
"THRILLED" |
|
COMMENTS: I was absolutely thrilled to receive my molds. Fantastic size and quality. Cannot wait to start using them. :-)
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Great quality.
|
|
• None
|
|
|
|
Bianca • Illinois
Date Submitted: 02/28/2016
I Recommend This Product!
|
|
"Easy use" |
|
COMMENTS: Great mood..easy to use
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Hot Process
|
|
|
|
|
Linda • Missouri
Date Submitted: 02/26/2016
I Recommend This Product!
|
|
"Perfect for this beginner!" |
|
COMMENTS: This was my first soap making adventure, and the silicone loaf mold was great to work with. It is sturdy and flexible at the same time. Soap came out of the mold beautifully.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Cassondra • New York
Date Submitted: 02/16/2016
I Recommend This Product!
|
|
"Silicone Mold" |
COMMENTS: These molds are great! They make clean up easy! The soap is easy to unmold. I do overfill these to get a textured top and find the molds do try to bow out a little in the middle. But as the soap sets up I just push on the bowed part to straighten it out a little. Definitely great for what I need it for.
| CC Response: | Another option would be to place support on the sides of the mold and then you won't have to check back on the soap as it begins to harden! |
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• easy to unmold soap
• easy clean up
|
|
• stronger sides
|
|
|
|
abigail • Connecticut
Date Submitted: 02/12/2016
I Recommend This Product!
|
|
"soap mold" |
|
COMMENTS: It worked as described, didn't bulge.
|
|
PRODUCT USED IN: Soap - Hot Process
|
|
|
|
|
Lylybell • Virginia
Date Submitted: 02/12/2016
I Recommend This Product!
|
|
"Great quality mold" |
|
COMMENTS: Unmolding took a while because wherever I tried to push the soap out, the other end would be holding onto the silicone haha! It's pretty sturdy but the sides may start to "bow" after many uses, which isn't much of a problem since I could use something like books to support the sides. The edges came out super clean and I like how the mold is translucent so you can somewhat see your embeds.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Mary • California
Date Submitted: 02/11/2016
I Recommend This Product!
|
|
"Regular Loaf Silicone Mold 1501" |
|
COMMENTS: I have been using this for over a year and it's holding up fantastic. Love these silicone molds.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Keri • Utah
Date Submitted: 02/10/2016
I Recommend This Product!
|
|
"Love this mold! " |
|
COMMENTS: Makes approx a 38oz batch of cp soap, more if you whip and add soap to the top. Very easy to unmold the soap. Much sturdier than expected which is nice.Easy to see through to know where you're at in the gel stage.So nice to not have to line molds, the soap comes out perfectly shaped every time.I ordered four when they were on sale and I am so glad I did. I love these molds!
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Very sturdy
• Can see through it
• Not having to line my mold
|
|
|
|
|
|
Fran • Texas
Date Submitted: 02/03/2016
I Recommend This Product!
|
|
"Easy to unmold" |
|
COMMENTS: Love this mold. I had a little trouble unmolding the first time, but after that it has been a breeze.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
ann • Michigan
Date Submitted: 01/31/2016
I Recommend This Product!
|
|
"regular loaf silicone mold" |
|
COMMENTS: I am so happy I bought this mold!!! My only regret is not buying more than one of them. Cold process soap was very easy to release from the mold. Will be placing an order for more of these very soon!
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• price
• easy release
|
|
• nothing
|
|
|
|
Teresa • Connecticut
Date Submitted: 01/30/2016
I Recommend This Product!
|
|
"Great Size " |
|
COMMENTS: I love the size of these bars. Easy to clean. Easy to remove cold process soap.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Iris • Florida
Date Submitted: 01/27/2016
I Recommend This Product!
|
|
"It works excellent!" |
|
COMMENTS: These molds are the best. Never have problems to unmold my soap, very easy to use, the corner are perfect!
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
|
|
|
|
|
LaShon • Virginia
Date Submitted: 01/24/2016
I Recommend This Product!
|
|
"Great Mold" |
|
COMMENTS: The regular loaf mold has made my transition to soaping easier than I expected. The loafs are a great way to start soaping as a beginner.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Melissa • Texas
Date Submitted: 01/23/2016
I Recommend This Product!
|
|
"Mostly Pleased" |
|
COMMENTS: I like this mold for the most part. It does tend to bow a little on the sides if you over fill it, so that's something to be mindful of. I wait 24 hrs or so before unmolding and the soap usually comes out pretty easily. After unmolding I soak the mold with dish soap, vinegar, and baking soda to remove any residual scents and dyes.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Elizabeth • Louisiana
Date Submitted: 01/22/2016
I Recommend This Product!
|
|
"Nice Mold" |
|
COMMENTS: Classic loaf mold for melt and pour. Very durable, soap comes out easily after pulling open all sides.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Home • Texas
Date Submitted: 01/17/2016
I Recommend This Product!
|
|
"My go to mold!" |
|
COMMENTS: This is my go to mold. It makes the perfect size bars, I get about eight 1in bars. It's important to make sure that the soap has dried enough before removing. The bottoms tend to stick to the corners if the soap is too soft. But it soap dries correctly, it comes out the mold perfectly. After several uses I did notoce the mold to bow out a little but it's nothing you'll notice once you cut the bars. I definitely plan on ordering more of these molds.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Shampoo Bars
|
|
|
|
|
Christina • Missouri
Date Submitted: 01/07/2016
I Recommend This Product!
|
|
"Perfect" |
|
COMMENTS: This mold in my opinion creates the perfect sized soap. I find it a tad bit difficult to unmold, not because of sticking, but because the sides of the mold are so sturdy that I can't turn it inside out like I do with cheaper ones that I don't care about. I actually consider that a plus and I'll take a little extra time to be careful and unmold properly.
If you are filling this up all the way to the top, it does bow slightly, but it really doesn't effect the way the soaps look. if you're worried about it, arrange a couple heavy bottles to support the sides or something like that and it will turn out great.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Sturdy, higher quality material
|
|
|
|
|
|
Melissa • Washington
Date Submitted: 12/13/2015
I Recommend This Product!
|
|
"Nice" |
|
COMMENTS: Good mold... Easy to work with, most soaps pop right out, doesn't hold other soap scents. Makes 8 one inch bars ...
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Jackie • Ohio
Date Submitted: 12/08/2015
I Recommend This Product!
|
|
"Great Mold - Versatile - Long Lasting" |
|
COMMENTS: I purchased 3 of these loaf molds back in 2012 and just now got around to reviewing it. I have made hundreds of batches of soap with it and it still works perfectly. The silicone is tough -- no ripping or other issues. I specialize in HP soap and it is very well suited for this process.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Durable
|
|
|
|
|
|
lmbbcare • New Jersey
Date Submitted: 12/04/2015
I Recommend This Product!
|
|
"Love this mold!" |
|
COMMENTS: I like the way the mold has an edge on it to keep the plastic wrap from falling into the cp soap. I like the size of the mold and how my cp soap comes out of the mold so easy!! I will be purchasing another one of these in the future!
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Chelsea • Illinois
Date Submitted: 11/23/2015
I Recommend This Product!
|
|
"Best mold I've used!" |
|
COMMENTS: I've tried a few other soaping molds and I have to say this is my favorite. The price is perfect (I've found the same mold elsewhere for more money), and they're easy to use and easy to clean. One misconception I had about the mold is that it was able to hold 2-3 pounds of soap, really it holds 1.5 pounds comfortably. Perfect if you produce small batches of soap and you don't want to have to buy a box to support your mold. This doesn't bow at all. I will definitely be using these (got more than one!) as my go to molds from now on.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Ashana • Pennsylvania
Date Submitted: 11/18/2015
I Recommend This Product!
|
|
"Great mold- Especially for beginner soapmakers" |
|
COMMENTS: Great mold. Works with MP and CP. Very easy to remove soap. Will be ordering more in the future.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Stacey • Montana
Date Submitted: 11/13/2015
I Recommend This Product!
|
|
"wonderful" |
|
COMMENTS: Works wonderful on making cold process bars. I was a little worried about the sides bowing out but they are ridged and have hold up well.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Beth • New York
Date Submitted: 10/19/2015
I Recommend This Product!
|
|
"Good product!" |
|
COMMENTS: This mold released so easily for my CP soap project. Measures only 8" long, so ideal for testing out new soap recipes! Washes up well afterwards.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Price
• Easy to unmold
• Size
|
|
|
|
|
|
Donna • South Carolina
Date Submitted: 10/17/2015
I Recommend This Product!
|
|
"Crafters Choice Regular Loaf Silicone Mold" |
|
COMMENTS: I was disappointed that the mold looked nothing like the picture. I felt it was very misleading. This is unusual for this company.
The mold is clear white. No blue and has no frame around it. I was also surprised at how short it is for the price.
However, it is very sturdy, needs no support and will likely last for years. I used it for melt and pour and it worked just fine.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Sturdy
• Needs no support
|
|
• Picture
• Price
|
|
|
|
Sandra • Florida
Date Submitted: 10/11/2015
I Recommend This Product!
|
|
"Nice Basic Mold" |
|
COMMENTS: I have 3 of these molds and I love them! I rub them with a tiny bit of coconut oil and my soap always slides right out. I will be buying more soon.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• size
• non stick
|
|
|
|
|
|
LaDonna • Kentucky
Date Submitted: 10/07/2015
I Recommend This Product!
|
|
"This is the only loaf mold I use" |
|
COMMENTS: No need to look for another loaf mold, this is it. I use 35 oz in each mold and this makes a great size bar of soap. Love it. I've made over 600 bars of soaps using 3 molds. So there ya go. It's strong sturdy and made to last.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Veronica • Texas
Date Submitted: 10/06/2015
I Recommend This Product!
|
|
"perfect mold" |
|
COMMENTS: perfect for a small batch of 2lb.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• easy release
• easy clean
|
|
• wish was bigger
|
|
|
|
cassie • Indiana
Date Submitted: 10/04/2015
I Recommend This Product!
|
|
"Great product!" |
|
COMMENTS: I really like this product. It is the perfect size for my soap recipes. Easy release of product and clean up is super easy. Will definitely be purchasing more.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Gail • Nevada
Date Submitted: 10/03/2015
I Recommend This Product!
|
|
"The best mold!" |
|
COMMENTS: This is the size that makes the bars that sell the best. Nice size, and perfect to make designs. Super sturdy sides that won't bow even if fully filled. Love this mold!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Sturdiness
• Size of bars
|
|
|
|
|
|
Tanya • Maryland
Date Submitted: 09/27/2015
I Recommend This Product!
|
|
"My Favorite Mold!" |
|
COMMENTS: This is my favorite mold. I use it for a ton of different styles of soaps. It is easy to unmold, though I have to rub a bit of mineral oil on it first. It is so much easier than using a wood mold. It can be washed by hand and it can take the dishwasher. I will probably get a few more :)
|
|
PRODUCT USED IN: Soap - CPOP
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy to use
|
|
|
|
|
|
Samirah • Maryland
Date Submitted: 09/26/2015
I Recommend This Product!
|
|
"Great mold!" |
|
COMMENTS: This mold is great and does not bend the sides of the soap at all. I will be ordering more very soon!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Crystal • Rhode Island
Date Submitted: 09/24/2015
I Recommend This Product!
|
|
"Love this mold!" |
COMMENTS: I used these mold for the first time tonight and I have never used a silicone loaf mold before because I was scared that they would bow. These have surprisingly solid and sturdy sides. I made a 32 oz HP batch of soap and I'd say only about 24 ounces fit in the mold. I expected more based on the description, but I will try for about 32 ounces with Cp next time.
I am definitely ordering at least two more or these!
| CC Response: | Thank you for your feedback! This mold will hold 40-44oz by volume. But not all products weigh the same. For example, a whipped soap will not weigh as much as a CP soap. The amount of soap this mold will hold by weight will vary from batch to batch. |
|
|
PRODUCT USED IN: Soap - Hot Process
|
|
|
|
|
Melissa • Tennessee
Date Submitted: 09/21/2015
I Recommend This Product!
|
|
"Love it but it bows out in the middle" |
|
COMMENTS: Several of the reviews indicated that this mold was stiffer and wouldn't bow, however, on my second batch, I had significant bowing. I use the old green molds often and haven't had a problem with those at all. If not for that, it would definitely be a 5 star! I love being able to see through the sides and it unmolds very easily compared to the green molds.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Transparency to see designs
• Ease of unmolding
|
|
• Sides that bow out
|
|
|
|
Angela • Georgia
Date Submitted: 09/21/2015
I Recommend This Product!
|
|
"Love, love, love this mold!" |
|
COMMENTS: This is an excellent mold for making small batches of cp soap. I like that you can see the colors through the sides. It's sturdy and does not require lining with wax paper. A must have mold.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Sturdy construction
• Does not bow
• See through
|
|
|
|
|
|
KLB • California
Date Submitted: 09/18/2015
I Recommend This Product!
|
|
"My favorite mold " |
|
COMMENTS: I bought one to start my soap making and found that this mold is very sturdy. Does not bend when filled with liquid soap. When my soap had set, i did not have a hard time taking it out of the mold. And cleaning it was easy. What more can I say? I really love this mold. I even ordered another one in my next order. Hopefully, it goes on sale so I can buy more.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Sturdy, does not bend
• Easy to clean
|
|
|
|
|
|
Emily • Indiana
Date Submitted: 09/05/2015
I Recommend This Product!
|
|
"Love this Mold!" |
|
COMMENTS: Great quality! Love how easy it is to release the soap from the mold and the fact that it does not bow. Would definitely order again.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy to unmold
• Does not bow
|
|
• Nothing
|
|
|
|
Danielle • Ohio
Date Submitted: 09/04/2015
I Recommend This Product!
|
|
"Great Mold" |
|
COMMENTS: I love this mold! Every batch comes out exactly the same and it's very easy to pop the soap out of it.
|
|
PRODUCT USED IN: Soap - Hot Process
|
|
|
|
|
deborah • Massachusetts
Date Submitted: 09/03/2015
I Recommend This Product!
|
|
"love these molds!" |
|
COMMENTS: I was using there hard plastic for a long time and I switched...wow! Way easier!! Love them!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Becky • Utah
Date Submitted: 08/30/2015
I Recommend This Product!
|
|
"Favorite mold" |
|
COMMENTS: We make the majority of our soaps using this mold and they always turn out awesome in this mold.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Gina • Massachusetts
Date Submitted: 08/24/2015
I Recommend This Product!
|
|
"Favorite Mold" |
|
COMMENTS: These are my favorite molds. I just purchased two more to add to my collection and I will keep purchasing. The ease of use, especially release of soap is just incredible. They really cut down on time and struggle either lining a mold or trying to maneuver cured soap out of the mold. Just love them!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Everything
|
|
• Nothing
|
|
|
|
Samantha • South Carolina
Date Submitted: 08/24/2015
I Recommend This Product!
|
|
"Great Mold" |
|
COMMENTS: I love this mold. It is very easy to use and even easier to clean. Also it doesn't bow out at all. I use 31 oz of oil for this mold and that gives me enough so that I can do a textured top.
|
|
PRODUCT USED IN: Soap - CPOP
|
|
|
|
|
Crystal • Kansas
Date Submitted: 08/22/2015
I Recommend This Product!
|
|
"Regular Loaf Silicone Mold 1501" |
|
COMMENTS: I really like this mold. It's easy to unmold and the bars are perfect rectangles.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Sides do not bow
• Easy to unmold
|
|
|
|
|
|
Sara • Iowa
Date Submitted: 08/17/2015
I Recommend This Product!
|
|
"Love!" |
|
COMMENTS: I have used this mold 3 times now for my MP soap. It is a great mold. Excellent quality. Does not bow. Will buy more.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Durability
• Stability
• Quality
|
|
• Wish it came in a larger size
|
|
|
|
Diane • Texas
Date Submitted: 08/17/2015
I Recommend This Product!
|
|
"The only one I use!" |
|
COMMENTS: This mold is awesome. It makes the perfect size bar. So far I have 8 of these. The soap is easy to release, it's easy to clean, and it holds its shape.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Great size
• Holds it shape
• Easy release of soap
|
|
|
|
|
|
Darla • Indiana
Date Submitted: 08/14/2015
I Recommend This Product!
|
|
"These Are A Must- Have!" |
|
COMMENTS: I ordered 2 of these and I love them! They make a good-sized loaf of soap, about 10-12 generously sized bars, or you can cut them(the loaves of soap) in half for smaller sizes. I have also used them to make embeds. The contents pop out very easily, and they hold their shape in spite of being super-flexible.All in all, a great product!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• flexiblity
• durability
• low cost
|
|
• sell in sets?
|
|
|
|
Courtney • Ohio
Date Submitted: 08/10/2015
I Recommend This Product!
|
|
"Perfect loaf mold!" |
|
COMMENTS: I love using this mold. I had been using an acrylic mold and it was such a pain in the butt. It is easy to remove soap from this one.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
|
|
|
|
|
Lisa • Virginia
Date Submitted: 08/10/2015
I Recommend This Product!
|
|
"Great Quality" |
|
COMMENTS: I dearly love my loaf mold, this is a great investment. A must have for anyone making soap.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• quality
• easy to use
|
|
|
|
|
|
Lynne • New Mexico
Date Submitted: 08/05/2015
I Recommend This Product!
|
|
"Good medium size" |
|
COMMENTS: I really like this mold...I have four...and it gives me 8 one inch slices of soap...the sides are sturdy with no bowing....will buy more when they go on sale :)
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• good mid-size loaf mold
|
|
• a lower price
|
|
|
|
Yaritzy • Minnesota
Date Submitted: 07/28/2015
I Recommend This Product!
|
|
"Met my needs" |
|
COMMENTS: I'm new to soaping and these molds met all my needs, plus they are clear so when I CPOP I can make sure all the soap has gelled before taking out of the oven.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP, Soap - Hot Process
|
|
|
|
|
veronica • California
Date Submitted: 07/21/2015
I Recommend This Product!
|
|
"the best!" |
|
COMMENTS: I'm very happy with this mold! I use it all the time.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
|
|
• they should make bigger and longer size
• tall skinny mold would be nice
|
|
|
|
Tara • Wisconsin
Date Submitted: 07/16/2015
I Recommend This Product!
|
|
"Love this!" |
|
COMMENTS: I've been wanting a smaller silicone loaf mold for quite a while. Right now I'm using it to make Melt and pour loaves. This mold is excellent. Sturdy and doesn't bow at the sides. It seems like it'll last a long time!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Sturdy, doesn't bow
|
|
|
|
|
|
Stephanie • North Carolina
Date Submitted: 07/15/2015
I Recommend This Product!
|
|
"Super easy" |
|
COMMENTS: I finally ordered these bad boys when the shoe box molds just weren't cutting it anymore. I love having a beautiful, uniform bar. That sells much better than the oddly shaped stuff I was making before. It is sturdy enough to stay up on it's own without any problem, yet flexible enough to get the soap out easily. It holds onto the scent from the last batch, but that hasn't been a problem with the following batches, and our wood mold does the same. I did not have any problems putting it in a 175 degree oven for some of the CPOP soaps I've made.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP
|
|
|
|
|
Stephanie • Michigan
Date Submitted: 07/13/2015
I Recommend This Product!
|
|
"Great loaf mold" |
|
COMMENTS: Easy to use and easy to unmold soaps.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Jennifer • Kentucky
Date Submitted: 07/02/2015
I Recommend This Product!
|
|
"Love the size!" |
|
COMMENTS: The molds are soft enough to unmold the soap but firm enough to not require any support. No bowing. Cuts 8, nice sized 4-4.5 oz sized bars.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Petri • Florida
Date Submitted: 06/30/2015
I Recommend This Product!
|
|
"Great loaf mold" |
|
COMMENTS: This was the 1st loaf mold I bought, I liked it so much I ordered another one , the corners are sharp and the sides are sturdy so the soap does not bulge out it makes great bars and it has a very sturdy rim so you ca pick it up easily.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• great quality for the price
|
|
• nothing
|
|
|
|
K E • Arkansas
Date Submitted: 06/24/2015
I Recommend This Product!
|
|
"Perfect size" |
|
COMMENTS: The ease of silicone and the perfect size for test batches. Or great if you are only making a small batch.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Ease of use
• Perfect size
|
|
|
|
|
|
Rhonda • Mississippi
Date Submitted: 06/23/2015
I Recommend This Product!
|
|
"Great Silicone Loaf Mold - No Bowing" |
|
COMMENTS: I was unsure of what kind of loaf mold to buy since I had only done melt & pour projects. I was getting my supplies for cp/hp and there are so many choices, wooden, pp plastic, silicone. I decided on this Crafters Choice mold and that was the best choice I could have made. I've made dozens of batches in this mold and plan on making dozens more. I've never had any bowing, the soap comes out easily especially with a little sodium lactate and it makes great size bars!! I've bought another mold since that I got cheap and it bows when about 2/3 full.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• No bowing
• Easy to unmold
• Nice straight edges
|
|
|
|
|
|
Michael • Virginia
Date Submitted: 06/12/2015
I Recommend This Product!
|
|
"Great product, great price" |
|
COMMENTS: Perfect for small batch soaps and so easy to unmold. Durable mold. Will order again.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• easy unmolding
• price
• size
|
|
|
|
|
|
Brandy • Alabama
Date Submitted: 06/10/2015
I Recommend This Product!
|
|
"I love this mold!" |
|
COMMENTS: I can get around 8 bars of soap out of this mold. It comes in handy for smaller batches.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Teresa • Alabama
Date Submitted: 05/30/2015
I Recommend This Product!
|
|
"Crafter's Choice loaf mold" |
|
COMMENTS: My absolute favorite mold. I use this mold for all kinds of soaps. I like that I don't need to use a releasing agent in order to unmold my soaps and that it is sturdy enough that the sides do not bow outward.
I'm planning to buy 2 or 3 more just like it.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Sturdiness...easy release...st
|
|
|
|
|
|
Jamie • Arizona
Date Submitted: 05/29/2015
I Recommend This Product!
|
|
"Love This MOld" |
|
COMMENTS: Just used this mold today and made a layered soap. Fast set up and easy release. I look forward to getting the next size up!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Solid Mold
• Doesn't Bow Out
• Easy To Unmold
|
|
• Nothing
|
|
|
|
Marci • Oregon
Date Submitted: 05/25/2015
I Recommend This Product!
|
|
"Regular silicone loaf mold" |
|
COMMENTS: I just love this mold. This mold has strong sides with ribs and does not bow. I've used similar molds that aren't as thick and although it did have reinforcement ribs, it did bow. I've only used it for CP soap and it has been wonderful. Definitely a great mold, I have 3 of them.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• thick reinforcing side ribs
|
|
|
|
|
|
Brenna • Kansas
Date Submitted: 05/19/2015
I Recommend This Product!
|
|
"A+" |
|
COMMENTS: Great product.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Lisa • Pennsylvania
Date Submitted: 05/13/2015
I Recommend This Product!
|
|
"Perfect little batch!" |
|
COMMENTS: I purchased this mold because it is the perfect size to use the 2oz freebie fo's! I typically make larger batches of soap so the small bottles have been collecting. Great size for fo testing also! I am definitely purchasing another with my next order, thanks!!!
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
|
|
|
|
|
1600 Elm Creek Dr. • Ohio
Date Submitted: 05/12/2015
I Recommend This Product!
|
|
"Great Mold for Cold Process Soap" |
|
COMMENTS: I am new to soap making and I was looking for a 2 pound mold. This one is great I don't have to mess with lining it and the soap is easy to get out of the mold.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• easy to release soap
• don't have to line mold
|
|
|
|
|
|
Kathy • New Hampshire
Date Submitted: 05/10/2015
I Recommend This Product!
|
|
"1501 Mold" |
|
COMMENTS: I love this mold. I have been using it since I purchased. I make Goat's Milk Soap so I find that putting it in the freezer before I pour stops partial gel phase, eliminating a circle in the middle.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Alex • Florida
Date Submitted: 05/08/2015
I Recommend This Product!
|
|
"Very nice molds" |
|
COMMENTS: They are sturdy, don't bow out, and release the soap easily. I just wish there was a larger size of these!
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Ease of use
• Design
|
|
• Larger sizes
|
|
|
|
Cindy • Ohio
Date Submitted: 05/07/2015
I Recommend This Product!
|
|
"A great mold" |
|
COMMENTS: I love the ease of using this mold. No lining and the soap pops right out. I do wish it was a little bigger or there were other sizes available but overall very happy with it.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
|
|
• A little bigger or more size options
|
|
|
|
Ashley • Pennsylvania
Date Submitted: 05/07/2015
I Recommend This Product!
|
|
"LOVE LOVE LOVE this mold!!!!" |
|
COMMENTS: This mold is extremely sturdy and really holds up well. The spines on the sides are very strong and the mold doesn't bulge at all even with the heaviest of batches. I have never had to use anything on the outside of the mold as support. The spines that are built into the mold are strong enough to hold your soap in place. I am very pleased with this mold and plan on ordering more.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Spines keep this mold very sturdy.
• Don't need outside support of mold.
|
|
|
|
|
|
Sheena • Tennessee
Date Submitted: 05/02/2015
I Recommend This Product!
|
|
"Great Buy!" |
|
COMMENTS: Love this mold and will buy another one! I can make bigger soap and more at a time!
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• everything
|
|
|
|
|
|
Gloria • Georgia
Date Submitted: 05/01/2015
I Recommend This Product!
|
|
"Love it!!!" |
|
COMMENTS: Look no more this is what I was looking for is perfect!!!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Hot Process
|
|
|
|
|
Jennifer • Georgia
Date Submitted: 04/24/2015
I Recommend This Product!
|
|
"Beautiful mold" |
|
COMMENTS: Works great, unmolds very nicely, and there's no warping.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Karen • Alabama
Date Submitted: 04/23/2015
I Recommend This Product!
|
|
"Perfect size mold" |
|
COMMENTS: Great for MP or CP soap! 44oz size makes 8-9 bars (depends on how you slice it). With CP soap, 30oz of oils creates a full loaf (after water/lye is added). I like it so much I ordered more!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Denise • New Jersey
Date Submitted: 04/21/2015
I Recommend This Product!
|
|
"my favorite mold EVER!!!" |
|
COMMENTS: Nice size when you are just starting out.....but still my favorite still!!!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Hot Process
|
|
|
|
|
Melissa • Indiana
Date Submitted: 04/19/2015
I Recommend This Product!
|
|
"Wonderful" |
|
COMMENTS: I'm really enjoying this some mold. It is an awesome size. I did not need to use a liner my soap came out perfectly. The fact that it stands in keeps form on its own is fantastic!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Durability
|
|
|
|
|
|
Sherry • Connecticut
Date Submitted: 04/09/2015
I Recommend This Product!
|
|
"The best type of mold" |
|
COMMENTS: The clear silicone lets me see the design of what I'm doing and that makes this mold top notch in my book.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
David • Tennessee
Date Submitted: 04/05/2015
I Recommend This Product!
|
|
"FABULOUS FIND" |
|
COMMENTS: So far these molds are great. As long as the soap is hard enough, the soap loaf just pops right out!
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Everything
|
|
• Available also in a larger size
|
|
|
|
William • North Carolina
Date Submitted: 04/04/2015
I Recommend This Product!
|
|
"Great mold!" |
|
COMMENTS: I LOVE this mold! I'll definitely be ordering another one (or two) soon!
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
michelle • Michigan
Date Submitted: 04/03/2015
I Recommend This Product!
|
|
"Love it" |
|
COMMENTS: My new favorite mold. Easy to release. easy clean up. Just love it.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
M. Antwane • South Carolina
Date Submitted: 04/03/2015
I Recommend This Product!
|
|
"The Best Soap Mold EVER!" |
|
COMMENTS: Need I say more? No sticking, no bowing, clean straight sides... My soaps look great because of this mold.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
|
|
|
|
|
kasey • New York
Date Submitted: 04/03/2015
I Recommend This Product!
|
|
"need two more" |
|
COMMENTS: I purchased two over time. I will need at least two more. The older the better. CP removes very easily. I appreciate that very much. When It is new, it has to be broken in, but once it gets broken in cp pops right out.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP
|
|
|
|
|
Emily • Michigan
Date Submitted: 03/30/2015
I Recommend This Product!
|
|
"Love it" |
|
COMMENTS: This mold is great you get about 8 nice size bars so since I'm new to soap making I like that it's not a huge batch if I ruin it. I use about 26 ounces of oils for this and it usually fills it up fine. The mold keeps it shape and doesn't need support, and the soap comes out nicely. I'll have to continue to use to see how they hold up after many uses.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Love the size
• Soap comes out easy
• Easy to clean
|
|
• Nothing
|
|
|
|
Molly • Pennsylvania
Date Submitted: 03/13/2015
I Recommend This Product!
|
|
"Perfect mold!" |
|
COMMENTS: This mold is so easy to use! Holes about 2lbs of soap and is easy to pop the soap right out when its done.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Agnes • New York
Date Submitted: 03/12/2015
I Recommend This Product!
|
|
"Nice Mold - Holds Up Well" |
|
COMMENTS: This is a nice sized, sturdy, silicone loaf mold. Doesn't need support. Easy to unmold. Have used over and over and it is holding up well. Will be ordering another in the future.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
sylvie • New Jersey
Date Submitted: 03/08/2015
I Recommend This Product!
|
|
"Soap making" |
|
COMMENTS: I love, love this mold. Such a convenient size to make small batches. I'm happy I bought two, sturdy on its own, doesn't require support.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Sarakenobi • North Carolina
Date Submitted: 02/26/2015
I Recommend This Product!
|
|
"surprised how much I love" |
|
COMMENTS: I bought a loaf pan on a whim and I'm so glad how much I love it. I didn't plan on making loaf soap because I love using fun molds. I like this so much more than I thought I would and plan on making a lot more. The only problem I had was that it bows slightly, which I was not expecting. I put some support underneath and that fixed it.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
catherine • Pennsylvania
Date Submitted: 02/26/2015
I Recommend This Product!
|
|
"Very nice and high quality" |
|
COMMENTS: Comparing this to some other silicone molds I have I can say that this is sturdy and strong yet flexible as expected. I love that you can see through it a bit to get a side view, especially with layers. Priced a bit higher then some but I expecte with the quality this will stand up to more.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Krista • California
Date Submitted: 02/24/2015
I Recommend This Product!
|
|
"best loaf mold" |
|
COMMENTS: This is my "go to" mold for CP soap. It makes the perfect size soap bars. I have used it with and without sodium lactate and it is definitely easier to unmold my soap when I use SL. Next time these go on sale I am buying more!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Kerry • Illinois
Date Submitted: 02/21/2015
I Recommend This Product!
|
|
"Excellent!" |
|
COMMENTS: I was skeptical that this loaf mold would be sturdy enough to hold more than two pounds of soap without bowing, but it worked great! There was no give on the sides and the loaf was easy enough to remove from the mold. Of course, this mold creates a loaf that fits perfectly into the mitre box. I am very pleased with this mold!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• very sturdy
• easy to unmold
|
|
|
|
|
|
Mia • West Virginia
Date Submitted: 02/18/2015
I Recommend This Product!
|
|
"Love This!" |
|
COMMENTS: This mold is great! I love the small size (as I just make soap for personal use), and the ease of use that silicone molds offer. The bars come out nice with straight sides and are a good size. I love this mold!
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
natcorr • Ohio
Date Submitted: 02/17/2015
I Recommend This Product!
|
|
"love this mold" |
|
COMMENTS: This mold makes 8 perfect bars. I love the control over this size batch. These molds are perfect and in one year I have only "broke" one.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
jessica • Virginia
Date Submitted: 02/14/2015
I Recommend This Product!
|
|
"Holds its shape " |
|
COMMENTS: Great old for m&p soaps easy to clean, easy to unmold.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Keeps its shape
• Easy to use
|
|
• Larger size
|
|
|
|
Dawn • Massachusetts
Date Submitted: 02/12/2015
I Recommend This Product!
|
|
"Love!" |
|
COMMENTS: I have a variety of molds, but I always go back to these loaf molds! They do bow out over time, but I use a clamp to keep everything in line when needed. I did have one that I think was a lemon, as it split after the second use. No issues since then, though! I like the size, it makes for a loaf that's easily workable. I make 3-5 loaves a week, and I have five molds. They get regular use, and I'll be ordering more of these in the future.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy to unmold
• Good size
|
|
• Improve rigidity in side const.
|
|
|
|
Julie • California
Date Submitted: 02/10/2015
I Recommend This Product!
|
|
"Best Mold" |
|
COMMENTS: These molds are great. I have six of them and I make all my loaves with them. So flexible and easy to use. Sturdy and rugged for multiply uses. A must have for soap making.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
ALICE • Maryland
Date Submitted: 02/08/2015
I Recommend This Product!
|
|
"very durable" |
|
COMMENTS: Used with my melt and pour soaps as well as cold process, it was very easy to clean and unmold the soap. Plus it doesn't retain the scents of the soaps.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Kathy • Missouri
Date Submitted: 02/03/2015
I Recommend This Product!
|
|
"The best mold ever!" |
|
COMMENTS: I bought one of these to try out, OMG I will never go back to anything else! I have ordered 4 more! They are sturdy, and the perfect size loaves come out of the mold like it has been greased! A need-to-have for your soap making!
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• ease of soap release from the mold
• perfect size
|
|
|
|
|
|
julie • North Carolina
Date Submitted: 01/30/2015
I Recommend This Product!
|
|
"Great Quality" |
|
COMMENTS: Love the size, durability, and flexibility of this mold. I will definitely purchase another soon.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
YTS • Texas
Date Submitted: 01/29/2015
I Recommend This Product!
|
|
"Great Mold" |
|
COMMENTS: One of my best molds for trying new recipes, special orders, and some soap just for me :)
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP, Soap - Hot Process, Soap - Shampoo Bars
|
|
|
|
|
Teri • Kansas
Date Submitted: 01/23/2015
I Recommend This Product!
|
|
"Amazing!" |
|
COMMENTS: I bought two of these to try out, OMG I will never go back to anything else! They are sturdy, perfect size loafs and come up like it has been greased! A great add to your soap stock!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Amy • Oklahoma
Date Submitted: 01/23/2015
I Recommend This Product!
|
|
"Very sturdy" |
|
COMMENTS: This is a great mold, I just used it last night. I was impressed by how sturdy it is and I did not need to support it, or use anything to keep it from bowing out. I love using silicone molds and this is a purchase I am very pleased with. I also like that it is clear, while you cannot see details you can see where the soap is, and where the colors are, which is helpful for me, especially with swirls and dropping color.
|
|
PRODUCT USED IN: Soap - CPOP
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Cost
• Sturdy
|
|
• I would like to see a tall skinny style
• I would like a larger one
|
|
|
|
Nick • Ohio
Date Submitted: 01/20/2015
I Recommend This Product!
|
|
"great product" |
|
COMMENTS: This mold was very easy to use and unmold soap!!! It was easy to clean and made a nice looking soap loaf!!!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Marcella • Pennsylvania
Date Submitted: 01/20/2015
I Recommend This Product!
|
|
"Easy to use!" |
|
COMMENTS: I love this loaf mold. The loaves of soap come out so easy!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
cheryl • New York
Date Submitted: 01/20/2015
I Recommend This Product!
|
|
"shampoo bars" |
|
COMMENTS: I like the stability of this mold. Unmolded this morning and released well.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
|
|
• i would offer more sizes
|
|
|
|
Lisa • Michigan
Date Submitted: 01/18/2015
I Recommend This Product!
|
|
"EXCELLENT Mold" |
|
COMMENTS: This mold is my first "real" mold after having used household containers on-hand while I experimented as a beginning soaper. I'll look no further as I'm very satisfied with the mold; it's durable, sturdy, and very easy to unmold. The colorant didn't stain and I don't smell a hint of the scent left on the mold. I've only used it with MP but expect it to perform the same with CP as well. I only ordered two and definitely plan on ordering more!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Sturdiness, ease in molding
|
|
• Wish it came in a larger size, too
|
|
|
|
Beverly • Ohio
Date Submitted: 01/18/2015
I Recommend This Product!
|
|
"Our go to mold--love them!" |
|
COMMENTS: Releases soaps well, perfect sharp edged bars--no distortions. The mold is opaque but you see enough to tell if swirls/colors are where you want them.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Nice size for trial loaves.
|
|
• Nothing.
|
|
|
|
Kimberly • Nevada
Date Submitted: 01/16/2015
I Recommend This Product!
|
|
"Love this mold " |
|
COMMENTS: The soap releases from the mold so easly
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Jennifer • North Carolina
Date Submitted: 01/12/2015
I Recommend This Product!
|
|
"Yes! AWESOME soap molds...no liners needed!" |
|
COMMENTS: I have completely ditched my wooden soap molds that I had to line with paper & only use these silicone loaf molds. I can get 8, 1" size bars of soap per mold, which is perfect. I freeze my cold process soaps instead of gelling them & they always pop out perfectly from the mold. I had 4 of these molds & just ordered 6 more! You will fall in love with them I promise :)
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Ashley • California
Date Submitted: 01/09/2015
I Recommend This Product!
|
|
"Strong and durable" |
|
COMMENTS: I use this when I make my soap in the crockpot. It is easy to remove the soap and looks very strong. I hope it lasts a long time. I will order a second one.
|
|
PRODUCT USED IN: Soap - Hot Process
|
|
|
|
|
Terri • Missouri
Date Submitted: 01/05/2015
I Recommend This Product!
|
|
"Excellent Mold" |
|
COMMENTS: I use this mold for my melt and pour and hot process and it's amazing how easy the soap comes out of the mold. I love the size of bars it makes as well. I no longer have any waste as I did with the regular loaf molds on the ends.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• I love the size
• Love the square corners
|
|
|
|
|
|
Barbara • Oklahoma
Date Submitted: 01/03/2015
I Recommend This Product!
|
|
"Regular Loaf Silicone Mold 1501" |
|
COMMENTS: I like the ease of removing soap from this mold.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Durability of this mold
|
|
• Nothing
|
|
|
|
Veronica • Michigan
Date Submitted: 12/30/2014
I Recommend This Product!
|
|
"1501 Silicone Mold" |
|
COMMENTS: This is by far my favorite mold ... I should have purchased more. Nice for working with melt and pour, you can visualize well when using imbeds, because the opacity allows you to see through a bit. It is the perfect size for (8) 1" bard of soaps, and you have square edges (not sloped or angled like a regular baking loaf pan). Especially like that it has the reinforced ridges on the sides, that help to keep the mold from bowing out when filled.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
PO Box 785 • Oklahoma
Date Submitted: 12/29/2014
I Recommend This Product!
|
|
"Perfect size" |
|
COMMENTS: I thought it sounded really big at first and when I got it I was very surprised as it's just the right size I was looking for. I wanted a size that was shower bar size, and I thought it might be too big. Now I need to get the smaller size for by the sink. Works great and very durable.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Durable
• Easy to unmold
|
|
|
|
|
|
Doris • Oregon
Date Submitted: 12/28/2014
I Recommend This Product!
|
|
"loaf of soap" |
|
COMMENTS: This mold works well and you don't have to buy anything else to go with it, just use it as is and your soap will slid right on. perfect every time.. very satisfied
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Karen • Illinois
Date Submitted: 12/17/2014
I Recommend This Product!
|
|
"Very nice material" |
|
COMMENTS: Only unfortunate thing is that is doesn't come in a larger size.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
jessicca • Michigan
Date Submitted: 12/09/2014
I Recommend This Product!
|
|
"Nice molds" |
|
COMMENTS: Great price for silicone molds. They are a bit small, but the bars still turn out great sized. They work excellent for both cp & hp. I will definitely be purchasing several more soon!
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• price
• durable
|
|
|
|
|
|
Jenica • Illinois
Date Submitted: 12/08/2014
I Recommend This Product!
|
|
"Love This" |
|
COMMENTS: This mold works perfect and is easy to unmold soap.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
KellyAnn • Pennsylvania
Date Submitted: 12/04/2014
I Recommend This Product!
|
|
"Perfect size" |
|
COMMENTS: I love this mold and use it for almost every soap I make. I have two of them but I may need a third.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Hot Process
|
|
|
|
|
Charlene • Georgia
Date Submitted: 11/29/2014
I Recommend This Product!
|
|
"Excellent mold for soap making" |
|
COMMENTS: Absolutely love the ease this provides in soap molding. Excellent product that takes much of the work out of achieving uniformity with my products!!!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Cassie • Massachusetts
Date Submitted: 11/25/2014
I Recommend This Product!
|
|
"Great!" |
|
COMMENTS: For my first time ever making soap, and with no real directions at all, these molds were great! They are very easy to use. Very easy to clean. They feel like they will last a while if I treat them with respect and keep sharp objects away. They bend and give just enough to help get the soap out. If it's your first time I suggest shaking it just a little and eventually the soap will start to slowly slide out. I did find that the molds stain and it can be hard to get the scent out from the previous soap. I used fragrance oils, I don't know, other types may not all linger.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• They bend
• Easy to clean
|
|
• Easy to stain
• Hard to clean out scents
|
|
|
|
Tana • Michigan
Date Submitted: 11/20/2014
I Recommend This Product!
|
|
"Love this Mold" |
|
COMMENTS: Love this Mold and how easily the soap releases from it. Soap has a smooth finish and looks great every time. Very happy with this product and will be buying more soon.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy Release from Soap Mold
|
|
• Nothing, it's wonderful!!
|
|
|
|
Ashley • Pennsylvania
Date Submitted: 11/18/2014
I Recommend This Product!
|
|
"Great Mold!!!" |
|
COMMENTS: I'm new to soap making but I've made two batches of soap so far and this loaf mold is amazing. I was worried about not having anything to support it in, but its very sturdy and needed no support! I also found it to be very easy to unmold and clean. It makes a good size loaf of soap and I cut mine into 16 small bars for family Christmas presents. I am considering buying another loaf! Great product. Great service. Won't buy from anywhere else.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• sturdy design
• easy to unmold
• holds alot
|
|
|
|
|
|
Natalie • Connecticut
Date Submitted: 11/07/2014
I Recommend This Product!
|
|
"Sturdy" |
|
COMMENTS: These molds are sturdy and save time because you don't have to line them. They don't crack and hold up over time. I was hesitant but I'm glad I made the purchase.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• srurdy, no lining required
|
|
• lower price
|
|
|
|
Donna • Georgia
Date Submitted: 11/06/2014
I Recommend This Product!
|
|
"I LOVE this mold!" |
|
COMMENTS: I have a variety of soap molds, including wood, acrylic, and silicone ones. I really love this mold, though, and I use it more than any others that I have.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Ease of use
• Smooth soap
|
|
|
|
|
|
Susan • Missouri
Date Submitted: 11/04/2014
I Recommend This Product!
|
|
"Great mold for the money" |
|
COMMENTS: This is a nice, sturdy loaf mold at a good price. It's a nice size, making eight substantial bar soaps. The only reason I gave it four stars instead of five is because it's rather difficult to unmold. But overall, a great mold.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• very sturdy
|
|
• easier to unmold
|
|
|
|
Bryan • New Hampshire
Date Submitted: 11/03/2014
I Recommend This Product!
|
|
"Needs some breaking in." |
|
COMMENTS: I find that it's a little stiff and not very pliable on first use, but once you break it in a little it works like a charm.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Home • California
Date Submitted: 11/03/2014
I Recommend This Product!
|
|
"My favorite mold!" |
|
COMMENTS: This is by far my favorite loaf mold! It stands up to the heat when making CP, doesn't warp, and cleans up easily. It is also a very easy loaf to unmold. Will be buying another one, with the holidays coming, I will definitely be needing more!
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Home • Indiana
Date Submitted: 11/03/2014
I Recommend This Product!
|
|
"Nice" |
|
COMMENTS: Great and sturdy
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Rebe • New Jersey
Date Submitted: 10/30/2014
I Recommend This Product!
|
|
"Excellent Mold" |
|
COMMENTS: Can remove my soap very easily!! Never have any problems.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
emmelou • Indiana
Date Submitted: 10/29/2014
I Recommend This Product!
|
|
"silicone mold" |
|
COMMENTS: Really love this mold. Had been wanting one this size for quite some time to run small test batches. It is nice and sturdy and doesn't buckle on the sides.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Cindy • Mississippi
Date Submitted: 10/25/2014
I Recommend This Product!
|
|
"My review of CC 1501 mold" |
|
COMMENTS: I cannot say how much I love my 1501 molds I bought. I can't wait to order some more of these. They are so easy to use and my soap slips right out of them without having to use any release agent at all.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Soap slips right out
• Ease of use
• Easy to clean
|
|
• I wish they were a bit cheaper
|
|
|
|
Melissa • Pennsylvania
Date Submitted: 10/15/2014
I Recommend This Product!
|
|
"Sturdy Soap Mold" |
|
COMMENTS: This mold is constructed very well. It works perfect for smaller batches of soap. I have had no issue with my soap sticking to the mold which is a huge plus!!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Janet • North Carolina
Date Submitted: 10/04/2014
I Recommend This Product!
|
|
"Favorite mold" |
|
COMMENTS: I had tried a flimsy, cheap silicone mold before I got this and it was a mess. I had to figure out a way to prop it up but my soap bars came out looking a mess. This makes perfect bars. I want more of them and when I can afford to get more I will.
|
|
PRODUCT USED IN: Soap - Hot Process
|
|
|
|
|
Christine • Maryland
Date Submitted: 10/04/2014
I Recommend This Product!
|
|
"My Favorite Mold" |
|
COMMENTS: I'm addicted to all things soapy. Like all good addicts, I have a mountain of different soap molds. A woman MUST have choices, I say. Well, turns out, I pretty much only use this one. Because it's so awesome. Semi clear, I can kinda see what's going on inside. Firm sides, doesnt bow. Perfect size. Super easy to unfold. Bars come out shiny with super smooth surface and perfectly sharp edges. I have bought several of these. I'll eventually end up accumulating a mountain of them, I'm sure. Such is love...
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP
|
|
|
|
|
Kirby • Pennsylvania
Date Submitted: 10/02/2014
I Recommend This Product!
|
|
"Excellent qualiity " |
|
COMMENTS: Ordered two of these and just love them. Very sturdy quality. Have used them several times already and they have worked perfectly. Plan to order several more.
|
|
PRODUCT USED IN: Soap - CPOP
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Sturdy, great price
|
|
• Nothing
|
|
|
|
Candleguy52 • Michigan
Date Submitted: 09/30/2014
I Recommend This Product!
|
|
"Will replace other Molds" |
|
COMMENTS: This mold is awesome! It makes nice loaf of soaps and easy to use and easy to get product out. I am buying more for a bigger production....Two Thumbs UP!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Kim • Pennsylvania
Date Submitted: 09/29/2014
I Recommend This Product!
|
|
"A must Have...several" |
|
COMMENTS: This is my favorite loaf mold. Very sturdy and releases very easily. I have several.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
archana • California
Date Submitted: 09/24/2014
I Recommend This Product!
|
|
"Love it!" |
|
COMMENTS: I am a first time soap maker and this mold is perfect.It holds up well and unmolds easily.Great for making 2 pound soaps.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Miranda • Michigan
Date Submitted: 09/24/2014
I Recommend This Product!
|
|
"Need more!! " |
|
COMMENTS: I bought one of these to try it out, and I have been extremely pleased. the sides hold up well on their own with no additional support. it does well with CPOP as well as being placed in the freezer for my non gel soaps. The soaps come out with a little assistance but no difficulty. easy to wipe down and clean when done. These molds make the perfect loaves - I usually calculate my recipes to about 30oz of oils.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• ease of cleanup
• no liner
• no need for support
|
|
|
|
|
|
none • Illinois
Date Submitted: 09/22/2014
I Recommend This Product!
|
|
"Working great" |
|
COMMENTS: I like these molds a lot. They are a good size for small production that I do and the soap always comes out very easily.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
|
|
|
|
|
Home • Maine
Date Submitted: 09/20/2014
I Recommend This Product!
|
|
"Love this! " |
|
COMMENTS: This is just the right size for the batches I like to make. So easy to unmold and toss in the dishwasher. I'll be buying at least two more in the next few weeks so I can make more than one batch a night! Handles heat and freezing really well.
|
|
PRODUCT USED IN: Soap - CPOP
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• size
• ability to unmold
• color
|
|
|
|
|
|
Katy • North Carolina
Date Submitted: 09/12/2014
I Recommend This Product!
|
|
"awesome mold!" |
|
COMMENTS: love the silicone molds and this one is no different. have used it over 20 times and its still in great shape. no bowing or staining. my loaves come out perfect every time.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• very durable
• made of thick silicone
|
|
• nothing
|
|
|
|
Brandon • New Mexico
Date Submitted: 09/11/2014
I Recommend This Product!
|
|
"Best loaf mold" |
|
COMMENTS: This mold is great for small batch loaves. The soap releases perfectly and easily. The size is great to cut into bars. I love the clean edges the high glass silicon leaves as you unmold the soap. Easy to clean and reset to pour again immediately.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy to unmold
• Easy to clean
• Professional finish
|
|
|
|
|
|
Kay • Alabama
Date Submitted: 09/07/2014
I Recommend This Product!
|
|
"Great silicone molds" |
|
COMMENTS: These are such an improvement from the old ones that first came out. I have a few of those, but love that Debbie took the time to study the form and shape and the need for the firmness and support on the sides and end. Now we have a great loaf of soap when it comes out. Thanks Debbie!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Sturdy mold
|
|
|
|
|
|
Norma • South Carolina
Date Submitted: 09/07/2014
I Recommend This Product!
|
|
"The Best Product I've found so far! " |
|
COMMENTS: While there may be some things about this mold that I wish were different, you can't beat it for the price and appropriate durability.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Courtney • Wisconsin
Date Submitted: 09/06/2014
I Recommend This Product!
|
|
"Great 2# mold" |
|
COMMENTS: I love this mold! Unmolding is super easy and clean up is a breeze!
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Karen • Montana
Date Submitted: 09/06/2014
I Recommend This Product!
|
|
"Strong" |
|
COMMENTS: Great side support!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Chanda • Missouri
Date Submitted: 09/02/2014
I Recommend This Product!
|
|
"my most used mold!" |
|
COMMENTS: My very favorite go to mold.So versatile with about any design you want.The silicones' so much easier to unmold.I even use it to form lotion bars.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Lotion Bars & Sticks
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• that it's made of silicone
|
|
• maybe a little lower price
|
|
|
|
Vickie • Florida
Date Submitted: 08/31/2014
I Recommend This Product!
|
|
"Great for making a 3 lb batch of soap." |
|
COMMENTS: I bought 4 of these molds when they were available as surplus. Each makes about a 3 lb batch of soap using 2 lbs of oils. I get about 8 one inch bars of soap. The molds are reinforced so they do not bow when filled to capacity. I find that I have to pop them into the freezer to remove the soap from the mold. Otherwise they are great!! Would like a small 6-8 inch square tray mold to use for a drop bullseye swirl design.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Richard • Nevada
Date Submitted: 08/30/2014
I Recommend This Product!
|
|
"Love this mold" |
|
COMMENTS: This mold works great! I have been using it for about 4 months now and it is just starting to bow on the sides from tapping out air bubbles. Makes the perfect size bars I want and very durable!
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Great material
• Great size
|
|
• The sides bowing
|
|
|
|
Audriana • Texas
Date Submitted: 08/26/2014
I Recommend This Product!
|
|
"Silicone Mold" |
|
COMMENTS: Perfect for any type of soap, used it for M&P, cold process, and hot process soap. I even used this to make my famous African Black soap. Holds well and easy clean up. This mold is tough but not tough to get soap out of.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Janice • New Jersey
Date Submitted: 08/26/2014
I Recommend This Product!
|
|
"Perfect Mold" |
|
COMMENTS: This is my "go to " mold for small run, specialty soaps. Allows me to have greater variety and to test a soap for popularity. My soap has a beautiful finish on release and the release is super simple. I hate when my beautiful soap gets damaged fighting to release from a mold. Added bonus, no cutting liners!
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy release
• Smooth soap finish
• Easy clean up, no liners
|
|
|
|
|
|
Jae Hyun • California
Date Submitted: 08/26/2014
I Recommend This Product!
|
|
"Best single log mold" |
|
COMMENTS: If you dont want to sink your money into bigger molds, this is it. Consistent and reliable.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Shannon • California
Date Submitted: 08/24/2014
I Recommend This Product!
|
|
"Great Mold" |
|
COMMENTS: Can be tricky to remove softer soap bases but overall this mold is sturdy and flexible. Very good and would buy again.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Carmala • Minnesota
Date Submitted: 08/23/2014
I Recommend This Product!
|
|
"These are great" |
|
COMMENTS: I have 16 of these molds. They work perfectly. I use them for CP and HP. Easy to unmold and wash up wonderfully.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Lynn • Ohio
Date Submitted: 08/20/2014
I Recommend This Product!
|
|
"Regular Loaf Silicone Mold 1501" |
|
COMMENTS: Wow, what a work horse! I just love this mold, and use it for everything, melt & pour, cold and hot process. No noticeable bowing in the middle, good crisp corners. I have no problem unmolding. Every soapmaker should have several of these!!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• No bowing
• Good, straight sides
• Easy to work with
|
|
• Nothing
|
|
|
|
andrea • Ohio
Date Submitted: 08/20/2014
I Recommend This Product!
|
|
"Regular Loaf Silicone Mold 1501 " |
|
COMMENTS: Bought this on accident and thought it was longer, however well made and sturdy. Made several loaves, turned out great, and its nice for smaller batches, works great with the soap cutting box as it is the same size. :)
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Mary • Pennsylvania
Date Submitted: 08/18/2014
I Recommend This Product!
|
|
"Loaf Silicone Mold 1501" |
|
COMMENTS: This is the second loaf Silicone mold I have purchased. I really like that it is easy to remove my cp soap, couldn't be easier. After pouring, I just let it rest on the counter about 24 hrs. then remove the soap and cut into bars. The molds are well made and durable. I recommend it to soap makers.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Wendy • Illinois
Date Submitted: 08/16/2014
I Recommend This Product!
|
|
"Loaf Mold 1501" |
|
COMMENTS: I Purchased this last week and I LOVE it. It makes the soap so much easier to remove that the plastic ones. I wish I had got it sooner. The edges are straighter, this makes it easier to cut atm. My next purchase will be the tray that helps cut the soap more even. Thank you. Everyone should have this mold :)
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• easy to remove soap
|
|
|
|
|
|
Pamela • New York
Date Submitted: 08/11/2014
I Recommend This Product!
|
|
"Great for test batches" |
|
COMMENTS: This mold works very well. If you use it on an uneven surface or if the soap gets over heated it will bow but on a flat surface (which is a bit of a no-brainer) it produces a lovely loaf of soap. The flexibility is great for un-molding.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Shampoo Bars
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• nice size for small soap batches
• insulates well
• un-molds easily
|
|
|
|
|
|
Barbara • Arizona
Date Submitted: 08/05/2014
I Recommend This Product!
|
|
"Love this mold!" |
|
COMMENTS: I have one of the original green silicone loaf molds and am still using it but wanted a second. The new one seems a little more flexible. Wish they made it in a tall also.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Not having to line my mold
|
|
• I would like the mold in a tall loaf
|
|
|
|
Rachel • Missouri
Date Submitted: 08/02/2014
I Recommend This Product!
|
|
"My favorite mold" |
|
COMMENTS: I use this mold almost every time I make soap. I already have 2 and just ordered a 3rd.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Hot Process
|
|
|
|
|
Cayci • Kansas
Date Submitted: 08/02/2014
I Recommend This Product!
|
|
"Great size and dependable" |
|
COMMENTS: I liked the size and the stability of this mold. Holds up well and unmolds great too. I wish it held a common amount like 3 pounds, as it's a bit short of that.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• form
• stability
|
|
• capacity
|
|
|
|
Cheryl • Florida
Date Submitted: 07/31/2014
I Recommend This Product!
|
|
"Convenient" |
|
COMMENTS: I love using these molds. I bought 10 which allow me to make a variety of soaps very quickly. The silicone is very durable. I use a wood soap mold for extra support but it is not needed.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• The Color
|
|
• Flexibility
|
|
|
|
3992 Hidden Acre RD • Florida
Date Submitted: 07/29/2014
I Recommend This Product!
|
|
"LOVE IT!" |
|
COMMENTS: I love this mold. Soap pops out with no problems.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Myssah Lee • Wisconsin
Date Submitted: 07/28/2014
I Recommend This Product!
|
|
"Loaf Mold" |
|
COMMENTS: I make a lot of different sizes and shapes with my soap, and most of my molds are silicone. This mold made me just as happy as all the other silicone molds I have. The best part is its size. Because of the amount of soap it takes, I find it a lot faster and easier to make some of my designs with this instead of the individual bar molds. Plus I like being able to sliced the loaf when its done especially if one of my customers makes a custom order over one pound.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Diane • Michigan
Date Submitted: 07/27/2014
I Recommend This Product!
|
|
"Regular Loaf Silicone Mold 1501 " |
|
COMMENTS: I love this mold so much that I bought two more! It is sturdy and well made. The walls do not spread out when the mold is full, they stay nice and straight and give you perfectly shaped bars. The soap is easy to un-mold.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Very sturday and stable sidewalls
• Easy to un-mold soap
|
|
|
|
|
|
Maria • Pennsylvania
Date Submitted: 07/25/2014
I Recommend This Product!
|
|
"Durable & Sturdy" |
|
COMMENTS: Easy un-molding and flexible durable silicone...great product!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Anna • Ohio
Date Submitted: 07/25/2014
I Recommend This Product!
|
|
"Sturdy! " |
|
COMMENTS: Soap pops right out with no issues! I love this soap mold. It's sturdy, doesn't buckle, and will still the test of time!
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Jane • Florida
Date Submitted: 07/24/2014
I Recommend This Product!
|
|
"Excellent Quality" |
|
COMMENTS: I'm so glad I read the reviews and bought 2 of these - I wish I bought more while they were on sale - hopefully, I'll catch the next sale and stock up. They're ideal for soap-making needs, in my professional opinion.
|
|
PRODUCT USED IN: Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• quality
• value
• durability
|
|
|
|
|
|
Marcellette • Michigan
Date Submitted: 07/23/2014
I Recommend This Product!
|
|
"Regular Loaf Mold" |
|
COMMENTS: I just love these molds works perfect. Use them with Hot and Cold Process soaps, will purchase again.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
|
|
|
|
|
Brenda • New Hampshire
Date Submitted: 07/23/2014
I Recommend This Product!
|
|
"Love this Mold!" |
|
COMMENTS: This mold is great. It make eight 1" bars and they slipped right out of the mold with not problem. Some people say they put it in the fridge for 30 minutes but there is no need to. The bars were perfect and the sides of the mold are very stable. Need to buy two more.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
vera • Kentucky
Date Submitted: 07/22/2014
I Recommend This Product!
|
|
"Excellent mold" |
|
COMMENTS: Best mold ever, will be buying more soon.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Very stable sidewalls
• Easy to remove loaf
|
|
• Nothing
|
|
|
|
Yolande • Texas
Date Submitted: 07/22/2014
I Recommend This Product!
|
|
"Best Ever" |
|
COMMENTS: I really love the molds. Great construction holds up well. Does well for CP and MP.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Sturdy for heavy soap.
• Construction.
• Love that it's clear.
|
|
• Nothing.
|
|
|
|
Pamela • Florida
Date Submitted: 07/21/2014
I Recommend This Product!
|
|
"Perfect" |
|
COMMENTS: I use this all the time! I am so glad I got it! It makes the perfect size, firm and yet easy to unmold.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• everything
|
|
|
|
|
|
Sarah • South Dakota
Date Submitted: 07/21/2014
I Recommend This Product!
|
|
"Fantastic mold" |
|
COMMENTS: I use this mold for hot process soap and it works great every single time. The soap pops right out and the mold is super easy to clean. I have found similar molds other places and they are always double the price.
|
|
PRODUCT USED IN: Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• nice price
• very easy to clean
|
|
|
|
|
|
Dawn • British Columbia
Date Submitted: 07/21/2014
I Recommend This Product!
|
|
"Great mold" |
|
COMMENTS: Its the only mold i would use
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Andrea • North Carolina
Date Submitted: 07/18/2014
I Recommend This Product!
|
|
"Great mold, nice release" |
|
COMMENTS: Have several silicone loaf molds, this is one of the nicest. Easy release and gives
nice glossy finish to M&P
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Sandra • Alabama
Date Submitted: 07/18/2014
I Recommend This Product!
|
|
"regular silicone mold" |
|
COMMENTS: Great mold, and great price! Use this with every batch of soap!
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP
|
|
|
|
|
chris • Ohio
Date Submitted: 07/15/2014
I Recommend This Product!
|
|
"Nice mold" |
|
COMMENTS: Easy to unmold ,nice and sturdy, great price
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
joan • Florida
Date Submitted: 07/05/2014
I Recommend This Product!
|
|
"On the money" |
|
COMMENTS: Could not wait for a sale. Grabbed 5 of them
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy to work with
|
|
• Larger
|
|
|
|
Kristina • Florida
Date Submitted: 07/03/2014
I Recommend This Product!
|
|
"Need more than one" |
|
COMMENTS: I got one of these molds, and all I can say is I need at least two more - they clean up in a snap, not having to line it is a blessing, and they're decently priced. I have noticed I get some bowing out on the sides (and the bottom, which puzzles me seeing as I leave my poured batches on perfectly flat surfaces), but its nothing two books can't fix.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP
|
|
|
|
|
Elizabeth • Pennsylvania
Date Submitted: 07/02/2014
I Recommend This Product!
|
|
"Perfect size" |
|
COMMENTS: Perfect size loaves of soap. I used it to make melt & pour, cp & hp soap. It held its shape. I'm so glad I purchased this.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Perfect size
• Can be used for hot or cold soap
|
|
|
|
|
|
JUDY • Pennsylvania
Date Submitted: 06/27/2014
I Recommend This Product!
|
|
"Sturdy" |
|
COMMENTS: I like this mold. It makes 8 bars for me and that's just right for what I need. It's very strudy!
|
|
PRODUCT USED IN: Soap - Hot Process
|
|
|
|
|
Jill • Wisconsin
Date Submitted: 06/27/2014
I Recommend This Product!
|
|
"Love These!" |
|
COMMENTS: I am in love with these molds. I use 1 teaspoon per mold of sodium lactate and the soap unmolds perfectly.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Home • California
Date Submitted: 06/25/2014
I Recommend This Product!
|
|
"Awesome CP Soap Mold" |
|
COMMENTS: I'm using this for strictly CP soap. So far, it works great for 2 lb batches.
The reason why I say that is because I've found that I usually get to a little over 2 lb in the mold once I add in any extra oils/exfoliants, and due to the excess water. If I leave it a little below the top, it allows me to turn over the mold and apply pressure evenly when it is ready to release. Basically, it keeps me from breaking the soap before unmolding, and from damaging the mold due to trying to preserve the shape of the soap.
So, I'd recommend doing 2 lb (total, not oils--I use about 1.5 lb of oils) batches in this mold for easier release.
The only problem I've found is that you have to let the soap set for quite some time before unmolding or the soap will warp/break. It's probably due to the silicon material, that doesn't allow for "breathing" once the oils have been saponified.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Sturdiness
• Ease of removal
|
|
• Cure time
|
|
|
|
Elizabeth • Massachusetts
Date Submitted: 06/24/2014
I Recommend This Product!
|
|
"Great Loaf" |
|
COMMENTS: A wonderful simple loaf - also thanks to the suggestions from everyone about this product.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Alysa • Georgia
Date Submitted: 06/20/2014
I Recommend This Product!
|
|
"Great Deal" |
|
COMMENTS: I love using this when I just want to make 6 to 8 bars of soap. It wonderful!!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Jenna • Arizona
Date Submitted: 06/13/2014
I Recommend This Product!
|
|
"Love this mold..." |
|
COMMENTS: I use this mold frequently when making CP soap. Makes a nice nice loaf for a small, 8 bar batch of soap. Highly recommend. I use sodium lactate with my soaps, but I have forgotten to put it in before and the soap still pops out of this mold.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Rose • Florida
Date Submitted: 06/11/2014
I Recommend This Product!
|
|
"Love these molds!!!" |
|
COMMENTS: These are the only ones I use now. I have a ton of wooden ones, but not having to line them is a real time saver and much cheaper! Once they are cured the soap just pops out! I recommend using a little mineral oil in them the first couple of times you use them.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• No lining needed
• Soap has sharp edges
• Great size
|
|
• Nothing!
|
|
|
|
Meghan • Maine
Date Submitted: 06/10/2014
I Recommend This Product!
|
|
"My favorite molds" |
|
COMMENTS: I am very pleased with the regular loaf silicone molds. The soaps pop right out once you get used to them. It seems they do need a little "breaking in". The more I use them, the easier it is to pop the soaps right out of the molds. I came across someone's tip to leave the soaps for about 5 days or so before trying to unmold...this is VERY IMPORTANT!!! They wash up well too. Great Molds.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Don't have to line them
• soaps pop right out
• easy clean up and storage
|
|
• Bigger loaf option would be great
|
|
|
|
Jeanea • Indiana
Date Submitted: 06/09/2014
I Recommend This Product!
|
|
"Love this mold" |
|
COMMENTS: I absolutely love this mold. I just wish they came in larger sizes. Good crisp corners.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• everything
|
|
• longer loafs
|
|
|
|
Sara • California
Date Submitted: 06/05/2014
I Recommend This Product!
|
|
"My Favorite Mold!" |
|
COMMENTS: And at the best price consistently
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Ashley • Missouri
Date Submitted: 06/04/2014
I Recommend This Product!
|
|
"Great" |
|
COMMENTS: I love this mold, I was concerned that it would not hold up well, but it does this is the mold i will buy from now on!
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Debbie • Missouri
Date Submitted: 06/03/2014
I Recommend This Product!
|
|
"Great Size" |
|
COMMENTS: This mold easily holds 40 oz. of soap batter. I got 8 i-inch slices of soap. I like that the mold stands up on it's own . . . no need for extra support . . . and it does not need to be lined. The soap slides right out. Make sure your soap is completely set before unmolding it. My melt and pour set for about 8 hours. I pulled at the sides a little to allow some air to flow around the soap loaf, then pressed on the bottom with my thumbs and eased the loaf out of the mold.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy to Use
|
|
|
|
|
|
Natalee • Texas
Date Submitted: 06/03/2014
I Recommend This Product!
|
|
"Love love love this mold" |
|
COMMENTS: Excellent price, very well made. Will be purchasing more of these in the future!
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP
|
|
|
|
|
Gloria • Florida
Date Submitted: 06/02/2014
I Recommend This Product!
|
|
"Crafters Choice Loaf- Regular Silicone Mold 1501" |
|
COMMENTS: I'm in love! I've made three batches so far in this mold and wish to get more in the very near future. Perfect edges and easy removal of cp soap.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Shari B • Tennessee
Date Submitted: 05/30/2014
I Recommend This Product!
|
|
"Soap Mold - Loaf" |
|
COMMENTS: This is great mold for making perfect rectangle soap. It is clear enough to see your design, if making one. Release is great!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy release
• Perfect size
|
|
|
|
|
|
Diane • Nevada
Date Submitted: 05/29/2014
I Recommend This Product!
|
|
"Love them " |
|
COMMENTS: I purchased two of these molds and wish that I had purchased more. They are so easy to use and the soap comes right out with nice sharp corners, no waste. Wash up nicely. The molds did take on the fragrance oil that I used, did not transfer to the next batch of soap.
The price is awesome. Looked every where else, these molds were more expensive and the other molds were just to large.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• price
• ease
• durability
|
|
• nothing
|
|
|
|
Marie • South Dakota
Date Submitted: 05/20/2014
I Recommend This Product!
|
|
"An Absolute Dream!" |
|
COMMENTS: This loaf mold is so much better than the previous one I was using. It's very sturdy, doesn't bow out on the sides and has very straight squared edges.
I cut my loaf with the Miter Box and get 8 beautiful, perfect size, SHINY bars every time. No waste whatsoever. I highly recommend this loaf mold!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Sturdiness, doesn't bow
• Squared edges
• Shiny look it gives the soap
|
|
• Nothing at all
|
|
|
|
Laura • North Carolina
Date Submitted: 05/15/2014
I Recommend This Product!
|
|
"No waste! " |
|
COMMENTS: I mostly have the kitchen type silicone molds, which results in lots of trimming. These have saved a lot of waste (that gets rebatched) because the sides are perfect. No need to cut excess end pieces off. Even the ends look like the other bars. I'm very satisfied with this mold and would love a larger one!
|
|
PRODUCT USED IN: Soap - Hot Process
|
|
|
|
|
Sherry • Florida
Date Submitted: 05/15/2014
I Recommend This Product!
|
|
"My GO-TO Mold" |
|
COMMENTS: I love this mold. It's so easy to use. I love that it's transparent enough that you can see the layers of soap. It's sturdy. No bowing out in the center at all. Easy to clean. Easy to un-mold. I do need to let it set an extra day or two before un-molding, but it's no big deal. This gives me the perfect amount of soap for my personal batches. I can cut them different ways depending on how thick I want my bars...
This mold hold around 42 ounces. LOVE IT!
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• transparent enough to see layer
• Easy to unmold
• Perfect size for personal batches
|
|
• NOTHING
|
|
|
|
M GRIFFEN • Utah
Date Submitted: 05/15/2014
I Recommend This Product!
|
|
"Nice mold... but split" |
|
COMMENTS: Used in MP soap and nice mold. Worked well in soap removal, but had 2 corners split with small tear in the first few uses. Nothing I can't work with. Love the mold structure. Would buy another as it holds it shape well (without using extra support) while full of soap.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• nice side support
• easy to remove soap
|
|
|
|
|
|
Lisa • Massachusetts
Date Submitted: 05/13/2014
I Recommend This Product!
|
|
"Love this mold!" |
|
COMMENTS: I absolutely love this mold! Perfect bars every time. I love the smooth and shiny finish of the soap after unmolding. A breeze to unmold. Will definitely be adding more to my soap arsenal.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Sharon • Ohio
Date Submitted: 05/12/2014
I Recommend This Product!
|
|
"Easy to remove product" |
|
COMMENTS: I recently upgraded to this mold. Then I wondered why I didn't do it so much sooner. This mold makes it so easy to remove the product. Will order more.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Rita • Washington
Date Submitted: 05/09/2014
I Recommend This Product!
|
|
"silicone mold" |
|
COMMENTS: I love this mold. It is durable washes out great and my sops come out so easily. I have ordered another mold for my melt and pour soaps.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Angela • Ohio
Date Submitted: 05/08/2014
I Recommend This Product!
|
|
"Great product!" |
|
COMMENTS: I use this loaf for my melt and pour soaps. It's so easy to get the soap out of and cleans super fast. Highly recommend!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Gloria • Colorado
Date Submitted: 05/02/2014
I Recommend This Product!
|
|
"Favorite Mold, Hands Down" |
|
COMMENTS: I love this mold so much, I'm going to buy more. A sturdy mold that handles high temps, yet makes releasing the soap loaf so easy. Love the shape! Love, love, love!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Handles high temps.
• Flexibility
• Ease of removing finished loaf
|
|
• Would love to see a 80 oz version.
|
|
|
|
Patrice • Connecticut
Date Submitted: 04/28/2014
I Recommend This Product!
|
|
"My First Loaf Mold" |
|
COMMENTS: I have no complaints whatsoever about this mold. This mold has been through many batches since I purchased it last year and shows no signs of wear at all. It doesn't buckle under the weight of soap, is very sturdy, and makes my loaves easy to unmold. I'll be getting a few more of these with my next order.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Deborah • Barbados
Date Submitted: 04/25/2014
I Recommend This Product!
|
|
"Good Mold" |
|
COMMENTS: Works well. Very sturdy, so no bowing and I love that it has straight edges and I don't have to cut off the ends of the soap.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Debbie • California
Date Submitted: 04/24/2014
I Recommend This Product!
|
|
"Good mold" |
|
COMMENTS: This is a good mold for me
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Barbara • Washington
Date Submitted: 04/19/2014
I Recommend This Product!
|
|
"Not that easy to unmold" |
|
COMMENTS: I had the same problem that some other had with unmolding. The material isn't that pliable to work with. I think I will us the suggestion that someone else made about putting a strip of freezer paper in it length wise to help lift it out. The sides come away fairly easily, but the bottom is hard to release.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Cindy • Wisconsin
Date Submitted: 04/19/2014
I Recommend This Product!
|
|
"I love this mold!" |
|
COMMENTS: I love this mold! It gives my soaps a sharp edge so I don't have to waste the ends. I will buy more of these molds! These are the best.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Design
• Very Sturdy
|
|
• Offer more sizes
|
|
|
|
Linda • North Carolina
Date Submitted: 04/18/2014
I Recommend This Product!
|
|
"One is not enough" |
|
COMMENTS: I needed this mold for several recipes I want to make. Within an hour of this mold coming in, I already was using it. It's a very sturdy mold and the walls seem to hold up well without being flimsy. The soap came out easily with good shape to the soap. This is one of the basic tools I have needed and will purchase several more. You can't go wrong with this mold.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy to use and good quality
• Easy to clean
• Soap turned out great
|
|
|
|
|
|
Kera • Virginia
Date Submitted: 04/17/2014
I Recommend This Product!
|
|
"The Best" |
|
COMMENTS: I have several molds, but this is by far the best. The walls do not buckle and there is no leakage like some of the constructed molds. Soap is easy to remove from the mold as well. I will definitely be investing in more of these!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Hot Process
|
|
|
|
|
Elizabeth • Alabama
Date Submitted: 04/17/2014
I Recommend This Product!
|
|
"My Go To Mold!" |
|
COMMENTS: This is THE best mold and I just wish I had more of them! I started using it for M&P but now use it for my CP soapmaking. I need to buy more so I can do multiple batches at once. Soap comes out easily, it's strong so it doesn't bow on the sides, and cleanup is a breeze!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Unmolds easily
• Easy to clean
• Doesn't bow
|
|
• Needs to come in a larger size!
|
|
|
|
Christine • Utah
Date Submitted: 04/16/2014
I Recommend This Product!
|
|
"LOVE!" |
|
COMMENTS: Best loaf mold by far!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Shampoo Bars
|
|
|
|
|
Dorothy • Florida
Date Submitted: 04/14/2014
I Recommend This Product!
|
|
"Love these (I now have 4)" |
|
COMMENTS: These molds are awesome. I like not making very big batches since I am smalltime still, because I like to make a variety of soaps. I am just now getting to where I need to make 2 batches of all the soaps I make because I am starting to run out and then my customer has to wait. These are so easy to use and so easy to get the soap out. I def. recommend these.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - CPOP, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size is perfect
• Easy to get the soap out
|
|
|
|
|
|
Marie-Anntoinette • North Carolina
Date Submitted: 04/09/2014
I Recommend This Product!
|
|
"My..." |
|
COMMENTS: go to mold
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Kristina • California
Date Submitted: 04/05/2014
I Recommend This Product!
|
|
"Soap Loaf Mold" |
|
COMMENTS: I love the mold and how sturdy it is, I have several of these now and use them all of the time. These are perfect for my milk soaps as they fit in my freezer easily. I do wish they was a larger size.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Cyndi • California
Date Submitted: 04/03/2014
I Recommend This Product!
|
|
"Love this size" |
|
COMMENTS: This is the 2nd mold I have purchased this size. It is perfect when needing to make a small bar of M&P Soap.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Bianca • Florida
Date Submitted: 03/31/2014
I Recommend This Product!
|
|
"Great mold" |
|
COMMENTS: Best hot process mold I have ever used. ..Great for the perfect 1 inch bar!
|
|
PRODUCT USED IN: Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• makes 8 bars!
|
|
|
|
|
|
Kathryn • North Carolina
Date Submitted: 03/31/2014
I Recommend This Product!
|
|
"My Favorite Mold" |
|
COMMENTS: I cannot say enough good things about this mold.
It is my absolute favorite and I wish I had more than one....
My soaps pop out of this mold so easily, clean up is a breeze.
I will definitely be getting more of these. It is such a great
value. It's a must have for every soaper!!
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• soap pops out easy
• clean up is simple
• value
|
|
|
|
|
|
KERRY • Massachusetts
Date Submitted: 03/31/2014
I Recommend This Product!
|
|
"soap loaf mold" |
|
COMMENTS: my soaps turned out so well I will be buying several more
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• clear so you can see to place layers
• or embeds
|
|
|
|
|
|
Roxanne • North Carolina
Date Submitted: 03/29/2014
I Recommend This Product!
|
|
"My favorite mold thus far!" |
|
COMMENTS: Great mold. The silicone makes for easy take out, and it is the perfect size for 3 pounds of CP soap. Gives the flexibility to make smaller batches of Artisian soaps so that you can diversify your designs.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
soapgal • Oregon
Date Submitted: 03/28/2014
I Recommend This Product!
|
|
"A sturdy mold" |
|
COMMENTS: Just made a batch of CP soap using this mold. It is sturdy and holds up the batter well. The size is good for me since I don't make a lot of soap at a time but enough for a decent size batch. I would buy more when I need it.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Robert • Michigan
Date Submitted: 03/27/2014
I Recommend This Product!
|
|
"Great Item! I'm Ordering More!" |
|
COMMENTS: I've used the two I purchased and am going to buy a couple more! Absolutely fantastic. Much better than wood molds. Makes soapmaking clean and simple.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
|
|
|
|
|
ashli • Florida
Date Submitted: 03/24/2014
I Recommend This Product!
|
|
"A great go-to silicone mold" |
|
COMMENTS: No lining for this one, and the price is right! For me, using sodium lactate is a must with silicone molds, so I had very little release issues. I only wish this mold were larger. I get 7 bars on it with my multi-bar wire cutter (each bar is just a tad over an inch thick).
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• great low price
• no need to line
|
|
• make it bigger
|
|
|
|
Maura • Indiana
Date Submitted: 03/23/2014
I Recommend This Product!
|
|
"I love these molds!" |
|
COMMENTS: I have switched over to these molds entirely for all my loaf soaps (CPOP, primarily). I love that they are one piece, and the smooth, shiny surface makes it easier to remove the finished soap.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Smooth surfaces
• Sturdy
|
|
|
|
|
|
Susan • Virginia
Date Submitted: 03/19/2014
I Recommend This Product!
|
|
"Great Loaf Mold" |
|
COMMENTS: This is a great loaf mold. Perfect for small cold process loafs or melt and pour. Very Sturdy and easy to remove soap! Would recommend!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Body Sprays & Perfume
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Sturdy
• Great Price
|
|
|
|
|
|
Brandi • Texas
Date Submitted: 03/16/2014
I Recommend This Product!
|
|
"My Favorite!" |
|
COMMENTS: I love this mold! No bowing on the sides, easy release, and gives nice, crisp corners.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy release
• Crisp corners
• Durable
|
|
|
|
|
|
Patricia • Michigan
Date Submitted: 03/15/2014
I Recommend This Product!
|
|
"loved this mold" |
|
COMMENTS: I love this mold, well worth the money. Easy to get the soap out of.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Tabitha • Michigan
Date Submitted: 03/10/2014
I Recommend This Product!
|
|
"Love love love!" |
|
COMMENTS: This is my favorite soap mold for loaf soaps. Easy to use and clean up. Will probably need another one or two soon!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Hot Process, Soap - Shampoo Bars
|
|
|
|
|
Totatzi • Texas
Date Submitted: 03/08/2014
I Recommend This Product!
|
|
"Works perfectly" |
|
COMMENTS: I bought this, the mitre box, and wavy cutter and now my soap making is way more efficient. No more spilling and losing product from pouring into smaller molds. Holds just over 2 lbs of melt and pour soap.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Heather • Georgia
Date Submitted: 03/06/2014
I Recommend This Product!
|
|
"great mold" |
|
COMMENTS: Great mold for cpop
|
|
PRODUCT USED IN: Soap - CPOP
|
|
|
|
|
Karen • Connecticut
Date Submitted: 03/04/2014
I Recommend This Product!
|
|
"Great mold" |
|
COMMENTS: This mold worked great. Soap came right out. Was a bit small for my recipe but I will use until I purchase a larger mold. Great mold for the price.
|
|
PRODUCT USED IN: Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Sturdy
• Price
|
|
• Make it larger
|
|
|
|
Alisha • Texas
Date Submitted: 03/03/2014
I Recommend This Product!
|
|
"Great Quality" |
|
COMMENTS: I am very pleased with the mold. Now that they are clear it makes it easier to see what you're doing when swirling colors or layering. It's built very strong and will give your soap clean, smooth sides. It does hold scent but soaking it in a mixture of soap and vinegar for a few days will help it fade away. The scent won't transfer to the next batch if you use it back to back.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Durable and strong
• Clear
|
|
|
|
|
|
Leilani • California
Date Submitted: 03/03/2014
I Recommend This Product!
|
|
"Like this mold a lot!" |
|
COMMENTS: My husband and I are new to the handmade soaping/cosmetics industry and have used this mold for smaller soaping batches. This has worked out great. It's easy to use and works really well. It was also really affordable!
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
brittny • Florida
Date Submitted: 03/01/2014
I Recommend This Product!
|
|
"What a lifesaver!" |
|
COMMENTS: These molds are so easy to use and no need to line. A must have for any soaper-from hobbyist to professional!
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• no liner required
• sturdy
|
|
• price
|
|
|
|
Rachel • Trinidad and Tobago
Date Submitted: 03/01/2014
I Recommend This Product!
|
|
"Love it" |
|
COMMENTS: This mold is excellent for the perfect size bars. Need to get about 2 doz of them. The mold doesn't bow at the sides which I like. It is heavy duty for soaping.
LOVE LOVE LOVE
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
|
|
• Nothing
|
|
|
|
James • Missouri
Date Submitted: 02/26/2014
I Recommend This Product!
|
|
"We really like this mold!" |
|
COMMENTS: This mold is used mostly for cold process soap. It has always held up and performed beautifully.
We have no complaints of this mold and we actually purchased a couple of more. Very solid, no bowing.
Thanks.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• No bowing
• Very well crafted.
|
|
• Make it a little bigger 60 ounces or so.
|
|
|
|
cheryl • Illinois
Date Submitted: 02/16/2014
I Recommend This Product!
|
|
"nice mold" |
|
COMMENTS: This is a nice stable silicone mold. My soap came out easy after 24 hours. I just pulled the sides out slightly and turned the mold over and pushed slightly on the bottom.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• easy to use
|
|
• maybe a 10 inch mold
|
|
|
|
Bethany • Virginia
Date Submitted: 02/15/2014
I Recommend This Product!
|
|
"Excellent mold!" |
|
COMMENTS: This mold makes the perfect soap with straight edges. There is no need to even cut off the end of each loaf because every slice looks perfect. It is a firm silicone and it takes some wiggling the sides to pop the seal. Once loose, the loaf slides right out of the mold. I cut 8 one inch slices out of each loaf. My only wish is that they would make the same mold in one that holds more than 2 pounds!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Natalia • Colorado
Date Submitted: 02/14/2014
I Recommend This Product!
|
|
"love it" |
|
COMMENTS: Great mold, sturdy, makes nicely shaped rectangular bars. I will need more of these.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• makes nice shape rectangular bars
• sturdy
|
|
|
|
|
|
Judy • Illinois
Date Submitted: 02/13/2014
I Recommend This Product!
|
|
"Extremely sturdy" |
|
COMMENTS: Love this mold - I use it over and over again!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Krisann • North Carolina
Date Submitted: 02/12/2014
I Recommend This Product!
|
|
"The best loaf mold for CP" |
|
COMMENTS: I have almost a dozen of these and LOVE them for doing small batches of CP soap. Does not bow when full, soap comes out easily, and these molds are incredibly easy to clean. Super durable and last forever!
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
jane • Missouri
Date Submitted: 02/07/2014
I Recommend This Product!
|
|
"Excellent Quailty" |
|
COMMENTS: These are excellent quality molds, I always say you get what you pay for and these do not disappoint.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Yvonne • California
Date Submitted: 02/07/2014
I Recommend This Product!
|
|
"Best Silicone Mold ever!!" |
|
COMMENTS: I love this mold and will order more soon. This mold does not lose its shape once the soap is poured in. Love it, just wish it was a wee bit bigger( 50oz instead of 40oz)
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• holds shape
• easy to clean
• price is great
|
|
• larger
|
|
|
|
andrea • Texas
Date Submitted: 02/07/2014
I Recommend This Product!
|
|
"Great Mold" |
|
COMMENTS: I love this mold. It's my go to mold,everything pop clean. Simple
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• easy remove soap
• gives smooth sides
|
|
• NOT
• A
• Thing
|
|
|
|
Deborah • Maryland
Date Submitted: 02/07/2014
I Recommend This Product!
|
|
"My staple mold for CP." |
|
COMMENTS: I have lots of molds for CP, but keep coming back to this one. Makes a nice size loaf that is easy to handle. Easy to release.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy release from mold.
• Good size for me; 8 bars.
|
|
|
|
|
|
Stephanie • Wyoming
Date Submitted: 02/03/2014
I Recommend This Product!
|
|
"Love These Molds!" |
|
COMMENTS: I own 8 of these molds now and they just cannot be beat for the price. I have found some good tips for using them though... 1. DO NOT wash these in the dishwasher, the silicone becomes weak and discolored when you do, just wash them by hand and dry with a cloth. 2. To get rid of any lingering scent from your last batch, soak in warm water with baking soda for about a half hour and then wash like normal. 3. If you put these molds in the freezer, wait about 5-10 minutes before un-molding your soap (any kind), this will help to keep from tearing the molds which can be a little brittle when frozen. I make M&P and HP in these which I can un-mold with no difficulty in 24 hours. When making CP I just put a piece of freezer paper in on the long side to act as a slip... my softest batch has never taken more than 48 hours to come out of the mold with that old trick! An excellent value for your money with many years of use!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Hot Process, Soap - Shampoo Bars
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• excellent value for the price
• easy un-molding with all kinds of soap
• easy clean-up and storage
|
|
• I would like it to be 1/2" longer
|
|
|
|
Erica • Washington
Date Submitted: 01/23/2014
I Recommend This Product!
|
|
"LOVE these molds! " |
|
COMMENTS: These are the best molds for soap for me! I love the batch size for this mold. It's a
sturdy mold with straight sides so you get a great rectangular loaf. I have used these for all kinds of soaping projects and have been pleased with them every time. I often cpop so it's a necessity for my molds to be able to go in the oven and these work perfectly for that.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• perfect size
• stable, straight sides
• great quality
|
|
|
|
|
|
TABITHA • North Carolina
Date Submitted: 01/22/2014
I Recommend This Product!
|
|
"Great Mold" |
|
COMMENTS: Mold is sturdy and released soap nicely!
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Emily • New York
Date Submitted: 01/21/2014
I Recommend This Product!
|
|
"excellent mold" |
|
COMMENTS: This mold is of superior quality and allows soaps to unmold easily. Soap takes longer to set up in silicone molds, but personally, I don't mind because it means I don't have to line anything! I just wish it was SLIGHTLY bigger.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
|
|
• i wish it was a little bigger
|
|
|
|
Beth • Missouri
Date Submitted: 01/18/2014
I Recommend This Product!
|
|
"Why didn't I buy more?" |
|
COMMENTS: Love this mold. I used to take 30 minutes just to line my wooden molds. This mold saves me so much time. I bought one when they were on sale and kick myself for not buying 3!
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Ease, convenience
• No more lining molds!
|
|
|
|
|
|
Relle • Florida
Date Submitted: 01/15/2014
I Recommend This Product!
|
|
"My almost favorite silicone mold" |
|
COMMENTS: I say almost, because if it were tall and skinny, it would be. It was a little stiff the first few times I used it and a little hard to get my CP soap out. I ended up placing the soap, in the mold in the freezer for a few hours and then it pops out with a little more flexing and bending. after about a dozen uses, it loosens up and the soap slides out. perfect size
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Perfect size
• Ease of soap removal
|
|
|
|
|
|
Sonja • Tennessee
Date Submitted: 01/15/2014
I Recommend This Product!
|
|
"My fav mold" |
|
COMMENTS: I have 2 of these now and love them both!!!!! I'm buying a few more soon!!!!
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Peggy • New York
Date Submitted: 01/13/2014
I Recommend This Product!
|
|
"Great for Cold Process soaps" |
|
COMMENTS: Love how easy my soap comes out! Perfect every time.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Lisa • Mississippi
Date Submitted: 01/06/2014
I Recommend This Product!
|
|
"Great mold!" |
|
COMMENTS: These molds are the best! They are great to work with. Finished product is super easy to unmold. Accurately described. I'll be back for more.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• silicone
• easy to unmold
|
|
• wish they held original shape better
• bow slightly
|
|
|
|
Angela • Ohio
Date Submitted: 12/28/2013
I Recommend This Product!
|
|
"Great Molds" |
COMMENTS: These Molds are very sturdy and high quality, the soap came out great. I wish these molds came in the larger size also.
| CC Response: | We love these too! We do carry a larger loaf mold. It is a silicone insert to a wooden mold that holds 71.5 oz of oils/6.5 lbs of water. So it will make more soap in that loaf shape. |
|
|
PRODUCT USED IN: Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Sturdy, High Quality
|
|
|
|
|
|
Angie • Kansas
Date Submitted: 12/25/2013
I Recommend This Product!
|
|
"Excellent mold!" |
|
COMMENTS: I have purchased several of these molds and they are holding up well so far. I had some trouble with the older green ones splitting at the corners, but these seem to flex more. The soaps are "glossy" when unmolded and are prone to fingerprints, so gloves are a must!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Patricia • Nevada
Date Submitted: 12/23/2013
I Recommend This Product!
|
|
"Nice mold!" |
COMMENTS: I'm really happy with this mold, it's far better than my hacked up home made soap box. One caveat, don't believe that it is for 40 ounces, I think my calculations came out to 28, so make sure you calculate your recipe for that. It releases easily, no problems there. I really like the size of the soap I get too. Definitely prefer this one to the plastic ones at the big box craft store.
| CC Response: | This mold produces a 40-44 oz. loaf of soap, but you are correct that it will hold a recipe that uses 28 oz. of oils. |
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
|
|
|
|
|
Anita • Virginia
Date Submitted: 12/22/2013
I Recommend This Product!
|
|
"Most Used Mold" |
|
COMMENTS: I have a lot of molds but this one is the most used and my very favorite mold. The sides of the soap are super glossy and the soap pops right out. I just pull the sides away and give a little push on the mold bottom. If I could only have one soap mold, this would be it.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Holly • Oklahoma
Date Submitted: 12/19/2013
I Recommend This Product!
|
|
"not what I was looking for... I LOVE IT!" |
|
COMMENTS: This little mold is very well built and sturdy as well. I was looking for something that made a more squared soap. I went with this and I LOVE IT !!!!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Heather • Wisconsin
Date Submitted: 12/13/2013
I Recommend This Product!
|
|
"all time favorite mold!" |
|
COMMENTS: This mold is my must have, Silicone makes it easy to remove soap loaves! perfect size, and easy to use!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Dane • Massachusetts
Date Submitted: 12/09/2013
I Recommend This Product!
|
|
"Fantastic quality and ease of use." |
|
COMMENTS: Will hopefully be purchasing more of these for melt and pour soap. The silicone is not flimsy in the least, and checking to see if loaves are ready to be unmolded is quite simple. Absolutely no problems so far, as the loaf comes out perfectly rectangular.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Design
• Ease of unmolding
|
|
|
|
|
|
julie • New York
Date Submitted: 12/06/2013
I Recommend This Product!
|
|
"love it!" |
|
COMMENTS: I'm a soaping newbie, having only been doing it for a few months. This is my first actual soap mold( have been using recycles containers up until now. My soaps look so much more polished now. Very happy with my purchase
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP
|
|
|
|
|
ninotchka • New Jersey
Date Submitted: 12/01/2013
I Recommend This Product!
|
|
"Nice" |
|
COMMENTS: I use this product for the preparation of my soaps, the material is strong and also is the size what I use for my soaps. I make at least 32 ounces of soap in and are excellent.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Terrie • Texas
Date Submitted: 11/26/2013
I Recommend This Product!
|
|
"Awesome mold" |
|
COMMENTS: I love this soap mold. The mold is flexible, the sides are reinforced and are extra strong. My soap slides out of this mold every time. Will purchase another.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP
|
|
|
|
|
Suzzanne • Colorado
Date Submitted: 11/23/2013
I Recommend This Product!
|
|
"OMG! Great loaf mold for the price!" |
|
COMMENTS: As soon as I got the mold I knew it was a keeper. I like to use silicone molds since I do CPOP for my soaps, so I can only use my wooden molds with silicone inserts. I've been using a one pounder, but was looking for a slightly larger one. This is perfect for your smaller batches. The sides are awesome. The results are perfect. No trouble unmolding. I love how I can see thru the mold. When the larger one is available I will be ordering that one. The price is perfect and the quality is great. It produces the perfect size bars for my new soap boxes. Oh and I love the straight sides and corners. Thanks for a affordable great mold!
|
|
PRODUCT USED IN: Soap - CPOP
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• The size- up to 8 bars
• The supported sides
• The see thru design
|
|
• Nothing
|
|
|
|
Elizabeth • Pennsylvania
Date Submitted: 11/15/2013
I Recommend This Product!
|
|
"AMAZING" |
|
COMMENTS: So far, these are my favorite silicone loaf molds! I love that they do not bow out in the center and therefore make a perfectly shaped soap loaf! I also love that they are semi-translucent which is perfect when doing designs &/or layering! I will continue to purchase these as long as I'm making soaps.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• color - semi translucent
• structure - sturdy & doesn't bow out
|
|
|
|
|
|
Shanon • North Carolina
Date Submitted: 11/14/2013
I Recommend This Product!
|
|
"Great Silicone Mold" |
|
COMMENTS: I didn't want to bother with lining molds and thanks to this mold, I don't have to! The dimensions are great, there's no bowing, and cleanup is easy. I've used it 3 times thus far and it's so sturdy, I'm sure it'll last a long time. I haven't added sodium lactate to my recipe and haven't had any problem unmolding. I do use shea butter in all my recipes though so that helps.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• no lining needed
• easy unmolding
• easy cleanup
|
|
• It would be nice to have a 4" size also.
|
|
|
|
Margaret • Arizona
Date Submitted: 11/12/2013
I Recommend This Product!
|
|
"Keeper" |
|
COMMENTS: Fantastic mold! The sides are rigid so there is no bowing and no need to reinforce the mold to get nice rectangular bars. The mold is small, but that makes it the perfect size for the hobbyist or the soaper trying out a new technique. If you wrap the mold in towels you can still get full gel and the soap pops out easily. Once you play around with gently prying the sides all you have to is push on the bottom and the soap pops right out. This mold is a keeper!
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• No need to line
• Small size for test batches
• Soap comes out easily
|
|
• A bigger size option
|
|
|
|
Deborah • North Carolina
Date Submitted: 11/12/2013
I Recommend This Product!
|
|
"Sturdy loaf mold" |
COMMENTS: This is a great little loaf mold, it is reinforced on the sides to prevent bowing. I've used mine multiple times. I only wish a larger one was offered.
| CC Response: | We do offer the Crafter's Choice Long Loaf Wood Mold & Silicone Mold Insert set. It is: 3.5" wide x 20.5" long x 3.5" deep. It is a great way to make more in a loaf shape. |
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Hot Process
|
|
|
|
|
Adrienne • California
Date Submitted: 11/09/2013
I Recommend This Product!
|
|
"Love this mold" |
|
COMMENTS: This mold is perfect! I just make soap for family and friends so I don't need a big one. Get 7-8 bars out of this and it releases easily with a little sodium lactate added to my recipe. I just might have to get another one :)
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Deborah • California
Date Submitted: 11/06/2013
I Recommend This Product!
|
|
"Melt & Pour" |
|
COMMENTS: My other loaf was made for baking, it bowed significantly the more soap I poured in. This one does not. Thank you Crafters Choice!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Julia • Ohio
Date Submitted: 10/29/2013
I Recommend This Product!
|
|
"My Favorite Soap Mold" |
|
COMMENTS: This is my favorite soap mold I have ever used. I like that I don't need to line the mold as that in my opinion can be a bit messy. The soap comes out of the mold easily and cuts into 8 generously sized bars or sometimes I cut it into six chunky bars. I have nothing but praise for this product haven't found a single thing I don't like about it.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Linda • West Virginia
Date Submitted: 10/19/2013
I Recommend This Product!
|
|
"My Go-To Molds!" |
|
COMMENTS: I own a bunch of these! I used these molds constantly and love them.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• CP soap does not stick
|
|
|
|
|
|
Jennifer • Tennessee
Date Submitted: 10/14/2013
I Recommend This Product!
|
|
"Best Soap Mold - Hands Down" |
|
COMMENTS: Love this mold. It holds it shape after lot's of use and has nice clean, even edges. Soap slides right out with barely a push on the bottom. The only thing I would change would be for it come in more sizes. I would love to have a 1 lb one for small batches for testing and samples.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Clean edges
• Durability
|
|
• Would like more size options
|
|
|
|
Shari • Kentucky
Date Submitted: 10/08/2013
I Recommend This Product!
|
|
"Awesome Mold!!!!" |
|
COMMENTS: This was our first time experimenting with soaps. This mold was easy to use and it came out perfectly! It is very sturdy and well-made! I would recommend this mold to anyone and will definitely be ordering more. Not to mention the pricing was great :)
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Well-made/Sturdy
• Easy to Use
• Soap popped right out
|
|
|
|
|
|
Laura • Michigan
Date Submitted: 10/07/2013
I Recommend This Product!
|
|
"Best Loaf Mold Out There!" |
|
COMMENTS: I love this loaf mold!I purchased one over 2 years ago and I loved it so much I purchased another 2. :) The sides don't buckle like all other loaf molds do, and the sides stay nice and square. My cold process soaps come out the molds nicely after waiting a couple of days, or first putting them in the freezer so I don't dent the soap. I have fallen in love with these molds ever since the first one i purchased, and wont use any other loaf mold ever! I hope these stay around forever. :) Thanks for making such a great item! :) At a very affordable price. :)
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Heat proof up to 500 degrees
• Sides stay nice and flat no buckling
• make 7-8 nice sized bars from one loaf
|
|
|
|
|
|
Jessica • Wisconsin
Date Submitted: 10/05/2013
I Recommend This Product!
|
|
"Awesome mold!!!! " |
|
COMMENTS: I am so happy with this silicone mold! I LOVE it and plan to order more of them. It was so much easier than lining my wooden mold and the soap came out really easily. I also love the shape of how my bars look after I cut them. Highly recommend to CP soapers!
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• soap came out of mold easily
• nice and compact
|
|
• Nothing!!
|
|
|
|
ameila • Alabama
Date Submitted: 10/01/2013
I Recommend This Product!
|
|
"bested loaf mold i have found!!!" |
|
COMMENTS: I like this mold easy to work with.soap will not stick to the mold when making cold process soap I will order another one.this is a must have mold
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• low price
• soap didn't stick to mold
• free shipping
|
|
|
|
|
|
Rose • North Carolina
Date Submitted: 10/01/2013
I Recommend This Product!
|
|
"Great soap mold! Very impressed." |
|
COMMENTS: I worried that I may have spent more on this mold than I needed to, that it wasn't a necessary purchase. But now that I have used it, I have absolutely no regrets. I am so impressed with this product. It is sturdy enough to hold it's shape well even when filled with the poured soap and very easy to see how far your soap has gelled while in the oven. It releases easily to give you a nice squared block of soap. Well worth the money. It is now my favorite mold !
|
|
PRODUCT USED IN: Soap - CPOP
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Sturdy , not flimsy when filled.
• clear color
|
|
|
|
|
|
belinda • New Hampshire
Date Submitted: 09/30/2013
I Recommend This Product!
|
|
"Strong" |
|
COMMENTS: I Love, Love, Love this mold! I have been using this mold for two years over and over and it is still as strong as the day I got it.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
victoria • Texas
Date Submitted: 09/23/2013
I Recommend This Product!
|
|
"perfect" |
|
COMMENTS: strong, easy release!
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Meghan • Florida
Date Submitted: 09/19/2013
I Recommend This Product!
|
|
"My favorite mold" |
|
COMMENTS: I love this mold, I have tried many others and this works the most consistently with cp soap. The soap is easily removed and the mold keeps it shape after many uses and is easy to clean.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Jane • New Mexico
Date Submitted: 09/19/2013
I Recommend This Product!
|
|
"Finally, Perfect size and shape soap bars" |
|
COMMENTS: This soap loaf is the perfect size and shape for producing lovely bars. Soap is easy to unmold with this loaf and is very user friendly. In the past, most loaf pans had a wider top or bottom and were never aesthetically pleasing, shapewise. This one is and I've used each one over and over again. I get 6 to 7 bars from one loaf, depending on my cutting skills that day. Customers love the shape which is easy to hold and use.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
bonnie • Tennessee
Date Submitted: 09/18/2013
I Recommend This Product!
|
|
"i just bought two more!" |
|
COMMENTS: love this mold! it is easy to use and perfect size!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• easy to use
|
|
|
|
|
|
Dylan • Georgia
Date Submitted: 09/17/2013
I Recommend This Product!
|
|
"LIFESAVER!!!!!" |
|
COMMENTS: This is the best buy and best investment I have ever purchased!!!! the silicone makes it so easy to get the loaf of soap out without any mess or chaos! LOVE THIS, and will probably be ordering many more for mass production
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Jennifer • Kansas
Date Submitted: 09/13/2013
I Recommend This Product!
|
|
"Great everyday mold" |
|
COMMENTS: This is a great mold for everyday soaping. I have used mine for over a year now and it has held its shape nicely. There is very minimal bowing of the sides. I usially soap 27ounces and it will yield 8 one inch size bars that are 3.5 to 4.5 ounces each when done. I really like that I do not have to line the mold. Just turn it upside down, give the soap a little push and it slides right out!
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• size
• don't have to line
|
|
|
|
|
|
Jan • British Columbia
Date Submitted: 09/08/2013
I Recommend This Product!
|
|
"Great for small batches" |
|
COMMENTS: This size is great for small batches of soap. Makes a nice, clean loaf with crisp edges.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size
• Easy to unmold & clean
|
|
|
|
|
|
Sonja • Michigan
Date Submitted: 09/06/2013
I Recommend This Product!
|
|
"Great mold" |
|
COMMENTS: This mold works very well, easy release. The bottom is thinner than the rest of the mold, but I always place my mold on a baking sheet or cutting board for easy moving. I like the transparency so you can get a preview of what's going on with your soap. It produces nice straight edges. You can get about 7 one inch bars. It's a nice size for smaller batches. Would LOVE to see a larger size option as well!
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
|
|
• Offer a larger size option.
|
|
|
|
Kimberly • Florida
Date Submitted: 08/29/2013
I Recommend This Product!
|
|
"Great mold" |
|
COMMENTS: Love the size and the fact that the sides stay perfectly straight.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
|
|
• Would love a 5lb loaf option
|
|
|
|
Karen • California
Date Submitted: 08/28/2013
I Recommend This Product!
|
|
"Awesome!" |
|
COMMENTS: This mold is perfect in every way. There is no need to place it into another container. It holds it's shape on it's own. It releases the soap easily and washed out clean. I like that it is clear so I can get a sneak peek of what my CP is going to look like.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Stands alone
• Clear
• Ease of product release
|
|
|
|
|
|
Jennifer • California
Date Submitted: 08/28/2013
I Recommend This Product!
|
|
"Great size" |
|
COMMENTS: Perfect medium size batch. I want to order the guest size one. Easy to unmold. I will take another please!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Wendy • Pennsylvania
Date Submitted: 08/21/2013
I Recommend This Product!
|
|
"Great!" |
|
COMMENTS: The size of this loaf was good because the end result makes a bar of soap that can easily fit in a hand. It makes 7-8 great sized bars and doesn't require pounds and pounds of soap to make the bars either, which is another big plus. By far the best loaf mold I have!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Pamela • Ohio
Date Submitted: 08/05/2013
I Recommend This Product!
|
|
"I use this almost daily!" |
|
COMMENTS: This mold gives a beautifully even, squared loaf of soap -- I use it for melt & pour and hot and cold process soaps, and it works great for everything. It's a snap to unmold soaps, and slicing them is a breeze with the mitre box that Crafter's Choice also makes. I think I need to get another one!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Hot Process
|
|
|
|
|
Mary • Nevada
Date Submitted: 06/28/2013
I Recommend This Product!
|
|
"nice mold" |
|
COMMENTS: Love this mold.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Melody • Texas
Date Submitted: 06/17/2013
I Recommend This Product!
|
|
"Excellent" |
|
COMMENTS: I use these all week long! It keeps it shape, even after several unmoldings. Soap is easy to remove from it. It makes a great size bar (I cut mine about 4.5-5 ounces) and I am able to get 7-8 bars from it.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
| Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information. |
 |
32 Question(s) Shown Below |
| Distributor & Drop Shipper Minimum Advertised Pricing |
As a Crafter’s Choice Distributor and/or Drop Shipper you have agreed to abide by the following Minimum Advertised Price (MAP) for each product and price level. You are permitted to advertise products at a higher price. You may not advertise the products at a lower price. Below you will find the MAP for this product.
|
|
|
|
|
