|
|
Additional Information |
|
Directions & Ingredients |
|
SDS & Documents |
|
|
Mold soap and cosmetics into small beautiful roses with this silicone mold. The finished soaps can be used as small guest bars or embedded into the top of a soap loaf. Pair with a pink or red color and a lovely floral fragrance to complement the design.
Common Uses:
Melt & Pour Soap. Cold Process Soap. Hot Process Soap. Lotion Bars. Bath Melts.
Points of Interest:
Silicone construction allows for easy soap removal. Detailed rose design in each cavity. Lovely as embeds to decorate rose scented soap slices!
Manufacturer: Wilton
Material: Silicone
Style: Cavity Mold
Number of Cavities: 12
Country of Origin: China
Color: Pink
Max. Temperature: 500ºF
Mold Dimensions: 8.25" x 5.75" x 0.5"
Wash molds in warm, sudsy water.
Country Of Origin: China
| | This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a). |
|
|
International Nomenclature of Cosmetic Ingredients (INCI): This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved): This product does need to be listed on the product ingredient label.
Directions:
Melt & Pour Soap: Pour melted soap into silicone mold cavities. Allow soap to cool at room temperature until hard. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Cold Process Soap: Pour soap at trace into the mold cavities. After at least 24 hours, gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface and gently push on the bottom of mold until the soap starts to release. Grab hold of the soap with a gloved hand, and allow soap to cure for 4-8 weeks. Note that some cold process soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Cold Process/Oven Process Soap: Pour soap at trace into the mold cavities. Preheat oven to 170ºF then place mold in oven. Turn oven off, and keep soap in oven overnight. The next day remove mold from oven. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Allow soap to cure for 2 to 4 weeks.
Hot Process Soap: Scoop hot process soap into mold cavities. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Lotion Bars: Pour melted lotion bar mixture into mold cavities. Allow mixture to solidify. Carefully remove lotion bars from mold by gently pulling the sides away from the lotion bars, and then push on the bottom of the mold until the lotion bars starts to release. Grab hold of lotion bar and carefully pull out of mold.
Care: Hand wash in warm sudsy water.
Average Customer Rating: |
|
(7 Reviews) |
Elizabeth • Colorado
Date Submitted: 07/07/2019
I Recommend This Product!
|
|
"Perfectly sized foe embeds" |
COMMENTS: I use this mold for embeds for my enhanced Bath Fizzies and they turn out to be perfectly sized each and every time. Whether I’m making my Solid Epsom Salt Scrub or MP Soap embeds they are perfect each time! I also love that I can make more than a hand full of embeds ata time!
|
PRODUCT USED IN: Soap - Melt & Pour, Exfoliants & Sugar Scrubs
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• 12 cavities • Easy to clean • Uniform shape and size
|
|
|
|
|
Josephine • Nevada
Date Submitted: 06/15/2018
I Recommend This Product!
|
|
"well made larger than expected" |
COMMENTS: This is an VERY high quality mold. It has stabilizer bars along the bottom of the mold that keeps the mold perfectly shaped, even when filled. However I was expecting it to be a little smaller than it was which in all honesty is probably my fault. The cavities are over an inch in diameter which was an issue because i normally cut my bars 1 inch thick.
If you are looking for a rose mold this size this is an exceptional mold
|
PRODUCT USED IN: Soap - Melt & Pour
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• quality
|
|
• size
|
|
|
Deniera • Illinois
Date Submitted: 11/27/2017
I Recommend This Product!
|
|
"too cute" |
COMMENTS: using in conjunction w/my bath bombs....too cute!
|
PRODUCT USED IN: Soap - Melt & Pour, Bath Fizzies & Salts
|
|
|
Kimberly • Indiana
Date Submitted: 04/18/2017
I Recommend This Product!
|
|
"Durable and reliable " |
COMMENTS: This little guy is standing up well to multiple uses. So far, every mold I've purchased here has held up better than anything I buy at the store.
|
PRODUCT USED IN: Soap - Melt & Pour
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Durable • Perfect Molding • Consistent
|
|
|
|
|
Debra • Florida
Date Submitted: 01/08/2017
I Recommend This Product!
|
|
"Perfect Roses!" |
COMMENTS: Perfect Roses every time.
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
Tracy • Florida
Date Submitted: 12/03/2016
I Recommend This Product!
|
|
"cute" |
COMMENTS: makes perfect little rose soaps
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
Carrie • Florida
Date Submitted: 05/02/2016
I Recommend This Product!
|
|
"Love the life-likeness!" |
COMMENTS: BEAUTIFULY molded rose 'tops'. They are gorgeous!
|
PRODUCT USED IN: Soap - Melt & Pour
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• the mold makes beautiful roses!
|
|
• have double the cavities • another mold that makes 'full' roses
|
|
|
Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information. |
|
2 Question(s) Shown Below |
Distributor & Drop Shipper Minimum Advertised Pricing |
As a Crafter’s Choice Distributor and/or Drop Shipper you have agreed to abide by the following Minimum Advertised Price (MAP) for each product and price level. You are permitted to advertise products at a higher price. You may not advertise the products at a lower price. Below you will find the MAP for this product.
|
|
|
|
|