|
|
Round Basic Silicone Mold 1602 |
|
|
|
 |
Additional
Information |
|
Directions &
Ingredients |
|
SDS &
Documents |
|
|
Create classic circular soap with this traditional round silicone mold. This is our favorite mold to use with our rubber duckies or luffas. A festive rubber duck can be found for most holidays, and luffa soap is perfect for pedicures.
Country Of Origin: China
|  | This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a). |
|
|
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.
Directions:
Melt & Pour Soap: Pour melted soap into silicone mold cavities. Allow soap to cool at room temperature until hard. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Cold Process Soap: Pour soap at trace into the mold cavities. After at least 24 hours, gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface and gently push on the bottom of mold until the soap starts to release. Grab hold of the soap with a gloved hand, and allow soap to cure for 4-8 weeks. Note that some cold process soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Cold Process/Oven Process Soap: Pour soap at trace into the mold cavities. Preheat oven to 170ºF then place mold in oven. Turn oven off, and keep soap in oven overnight. The next day remove mold from oven. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Allow soap to cure for 2 to 4 weeks.
Hot Process Soap: Scoop hot process soap into mold cavities. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Lotion Bars: Pour melted lotion bar mixture into mold cavities. Allow mixture to solidify. Carefully remove lotion bars from mold by gently pulling the sides away from the lotion bars, and then push on the bottom of the mold until the lotion bars starts to release. Grab hold of lotion bar and carefully pull out of mold.
Care:
Hand wash in warm sudsy water.
| Average Customer Rating: |
 |
(127 Reviews) |
|
Charlette • Ohio
Date Submitted: 12/09/2024
I Recommend This Product!
|
|
"Beautifully Basic" |
|
COMMENTS: We use these for our hefty syndet shower bars. Syndet bars work best in basic shapes as they aren't as "pretty" as traditional soap and don't adapt well to fanciful shapes. We use the round molds and also the oval molds. The molds are sturdy, thick, and easy to wash. The product ejects smoothly from the mold.
|
|
PRODUCT USED IN: Soap - Shampoo Bars
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Ease of use
• easy to wash
• Product ejects smoothly
|
|
|
|
|
|
Debbie • Texas
Date Submitted: 11/26/2024
I Recommend This Product!
|
|
"Great mold" |
|
COMMENTS: I have many of these molds. I use them primarily to make a peppermint charcoal salt soap. The soap releases easily from the mold and is a nice size. Good paired with the square soap boxes.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Parker • Colorado
Date Submitted: 06/13/2020
I Recommend This Product!
|
|
"BIG soaps!" |
|
COMMENTS: WOW is this a great size mold! We bought the Candula Sun Soap kit. WOW. The soaps were a lot bigger than I thought they would be. We package using coffee filters, and this size is just the right size for a coffee filter.
We decided to use this to make our shaving soaps. We are trying to cut down the numbers of molds in the shop, so this takes care of two products. We are considering using it for a lotion bar and will do a test soon. This is a much bigger round bar than the Milky Way shaving soap molds. Typical silicone mold, works beautifully, with product sliding out perfectly. We love this mold.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Shave Shampoo, Bath Fizzies & Salts
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Ease of use
• Big mold cavity
|
|
• Make a second one with smaller cavity
|
|
|
|
Maurette • Idaho
Date Submitted: 11/15/2019
I Recommend This Product!
|
|
"Great silicone mold " |
|
COMMENTS: I had been looking for a mold to make round luffa soap. This did the trick wonderfully. This mold is very sturdy silicone. It was a little harder to get the soap out then most other silicone molds I have used. After thinking about it, this mold is similar to the one we got from you several years ago. It is the silicone mold in a loaf that can be cut into 7 or 8 bars of soap (depending on the size they are cut- 4 to 5 ounce bars.). We are still using this loaf mold. So I imagine that this round mold will last for years. I am very pleased with the end result. I made cold process goat milk soap with lemon grass essential oil. Before pouring the soap in the mold, I did spread a light cpoating of sunflower oil on the surface. I think this helped to get the soap out of the mold a little easier. I also was going to get this when the mold was on sale, but the sale ended earlier then I thought. So I had to pay the full price, but I am still very pleased with it. It makes nice round bars of soap. After curing for a week they weigh around 4.5 ounces.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• The end product
|
|
• The price. Better price on sale.
|
|
|
|
Lanna • Pennsylvania
Date Submitted: 10/23/2019
I Recommend This Product!
|
|
"Luffa soaps!" |
|
COMMENTS: Just right for luffa soaps. Makes a nice 5oz bar. Easy to pop soaps out!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Sharon • Pennsylvania
Date Submitted: 09/20/2019
I Recommend This Product!
|
|
"Round Basic Mold" |
|
COMMENTS: This is the first time I used this mold and I absolutely love it. The bars are just simply elegant. They also are perfect for loofahs, which I also used for the first time. I will be ordering more of both!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size bar
|
|
|
|
|
|
Samantha • Ohio
Date Submitted: 08/18/2019
I Recommend This Product!
|
|
"perfect for luffa soap" |
|
COMMENTS: Perfect for my individual luffa soaps
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Robin • Georgia
Date Submitted: 06/02/2019
I Recommend This Product!
|
|
"Perfect!" |
|
COMMENTS: This is the perfect mold! I used it to make cold process soap and it made beautiful bars of soap! I had no trouble getting the bars out of the mold! I did not have to put the mold in the freezer to get them to release. The bars are the perfect hand size and my recipients love that! I am buying second mold today!
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Shape
• Size
• Easy release of soap
|
|
|
|
|
|
Marilyn • Pennsylvania
Date Submitted: 03/21/2019
I Recommend This Product!
|
|
"Upgraded Mold" |
|
COMMENTS: This mold is an upgrade from the ones I was using previously. They hold 5 ounces with a loofah embed and have smoothe, rounded edges.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Shampoo Bars, Face Care
|
|
|
|
|
Annette • Texas
Date Submitted: 01/03/2019
I Recommend This Product!
|
|
"Great sized bars" |
|
COMMENTS: This makes a really nice 5 oz bar of soap. So many cavity molds fall short of being a good bath bar but these are perfect. I use theme during holidays to place MP embeds on top as an easy holiday soap and I use loofah to embed in MP for pedicure bars. Perfect size for shave soaps as well. I really like this mold.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
April • Missouri
Date Submitted: 12/27/2018
I Recommend This Product!
|
 |
"Good" |
|
COMMENTS: Works well for mp soap. It was not blue like the pic. The silicone was not perfectly smooth and did leave a slight texture on my bars, I’m probably the only person who noticed.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Diana • Oregon
Date Submitted: 11/02/2018
I Recommend This Product!
|
|
"Rubber duvkies and loofas made" |
|
COMMENTS: Perfect size for both duckies which i found at a dollar store for cheap. Loofas as well. They are great for these
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Tonya • Pennsylvania
Date Submitted: 08/17/2018
I Recommend This Product!
|
|
"Perfect size for loofah" |
|
COMMENTS: I get so many requests for my loofah soaps. But it's difficult to cut them (my hubby was using a band saw!). This way, I can precut my loofah to perfect size, and I get nice, even, professional bars.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Lotion Bars & Sticks
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Perfect width & depth
• Easy to fill and unmold
|
|
• A bit more affordable
|
|
|
|
Dennis • Georgia
Date Submitted: 06/10/2018
I Recommend This Product!
|
|
"Round Basic Silicone Mold 1602" |
|
COMMENTS: Got the basic round silicone mold 1602 to embed the vinyl Gold Fish in, as well as for making the Spa Duck Soap. The mold is very sturdy (yet flexible), and the depth of the wells make it perfect for embeds, plus it's a really nice size for a round soap.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
sindy • Arkansas
Date Submitted: 04/01/2018
I Recommend This Product!
|
|
"GREAT" |
|
COMMENTS: Product is GREAT!! Makes what your making even better.Perfect size easy to unmold
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Bath Fizzies & Salts
|
|
|
|
|
David • Tennessee
Date Submitted: 03/24/2018
I Recommend This Product!
|
|
"Perfect for loofah soap" |
|
COMMENTS: Bought several of these to make loofah "infused" soap. They are just perfect! Glad I bought enough to make large batches.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Deb • Pennsylvania
Date Submitted: 02/24/2018
I Recommend This Product!
|
|
"Nice mold!" |
|
COMMENTS: I love this mold for facial bars, but I also keep this handy to pour in any extra batter I have at the time. These are very sturdy. Easy to un-mold your soaps.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Stacy • Colorado
Date Submitted: 02/21/2018
I Recommend This Product!
|
|
"Great Mold!" |
|
COMMENTS: I am new to soap making, but tried some melt & pour soaps and also used these for my lotion bars. I love that the mold is silicone and soft sided for easy popping out, but it also has nice sharp edges and corners. And a good depth!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Lotion Bars & Sticks
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Nice Edges
• Easy Removal
|
|
|
|
|
|
Darla • Kentucky
Date Submitted: 02/01/2018
I Recommend This Product!
|
|
"Great" |
|
COMMENTS: This is a great little mold for your basic round soap. Nothing fancy, just basic and simple. Un-molds easily and cleans up well.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
shannon • Texas
Date Submitted: 11/29/2017
I Recommend This Product!
|
|
"round " |
|
COMMENTS: perfect for loofah soaps
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• everything
|
|
|
|
|
|
Tracy • Arizona
Date Submitted: 09/21/2017
I Recommend This Product!
|
|
"User Friendly" |
|
COMMENTS: I love this mold... it's easy to remove product; it's very strong and durable; and holds it shape well. I use it for my luffa soaps, exfoliating scrub bars and bath bombs.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Bath Fizzies & Salts, Lotion Bars & Sticks
|
|
|
|
|
Lady Diannaly • Texas
Date Submitted: 05/31/2017
I Recommend This Product!
|
|
"Versatile Mold" |
|
COMMENTS: This is a great investment! Waayyyy better quality than the cheapie ones so price-wise it isn't bad at all. Not flimsy at all. Your soap are safe with this one.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• The sturdiness of the material used.
|
|
|
|
|
|
Kathleen • Virginia
Date Submitted: 05/31/2017
I Recommend This Product!
|
|
"Love, love, love this mold!" |
|
COMMENTS: Easy to use and flexible which has kept it's shape well. Produces a nice handling size soap.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• shape
• size
|
|
|
|
|
|
Danielle • California
Date Submitted: 05/19/2017
I Recommend This Product!
|
|
"Sturdy yet Flexible" |
|
COMMENTS: Great molds that can be used over and over. Seems very sturdy and easy to remove the soap.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Bonnie • West Virginia
Date Submitted: 05/02/2017
I Recommend This Product!
|
|
"Excellent mold" |
|
COMMENTS: This is the best mold of its type on the market. I use it for loofah m&p soaps. Perfect size, excellent quality.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Quality
• Size
|
|
|
|
|
|
Lucretia • Georgia
Date Submitted: 04/05/2017
I Recommend This Product!
|
|
"Get two!" |
|
COMMENTS: Perfect size. Made soap on a rope with loofah using M&P. Love silicone molds. It is sturdy, holds up well. I'm so glad that I got two. Will order another pair.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Sturdy
• Economical
|
|
|
|
|
|
Karen • Utah
Date Submitted: 03/21/2017
I Recommend This Product!
|
|
"Round silicone mold" |
|
COMMENTS: This round mold is the perfect size for making exfoliating soaps with luffa. I love the fact it's silicone. This will be a great seller with summer coming up.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Shave Shampoo, Bath Fizzies & Salts, Pet Care
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Great size
|
|
• Nothing
|
|
|
|
Sharon • South Carolina
Date Submitted: 03/20/2017
I Recommend This Product!
|
|
"Works wonderfully" |
|
COMMENTS: Used this mold to make luffa soaps and these were a perfect match with the luffas. Looks wonderful together.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
kris • Florida
Date Submitted: 01/11/2017
I Recommend This Product!
|
|
"Round Silicone Mold" |
|
COMMENTS: Very sturdy, not flimsy at all. Used to make MP with loofah. Perfect diameter and depth.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Elena • Arkansas
Date Submitted: 09/14/2016
I Recommend This Product!
|
|
"satisfied with these molds" |
|
COMMENTS: Great quality molds
|
|
PRODUCT USED IN: Soap - Shampoo Bars
|
|
|
|
|
Christa • Michigan
Date Submitted: 09/06/2016
I Recommend This Product!
|
|
"In love" |
|
COMMENTS: I am in love with this mold. I will be able to make so many luffa soaps with this. My very first soap. Great experience. Thanks Debbie may for the recommendation .
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Irma • Virginia
Date Submitted: 08/24/2016
I Recommend This Product!
|
|
"wonderful size" |
|
COMMENTS: I waited several weeks for this mold to be available once I read testimonials and saw pictures about how useful it could be. It was worth ever second of the wait ! Makes six large size perfectly round soaps
that fir very nicely in the hand. The silicon is stiffer than what I am used to, so the soaps are a little more work to unmold, but that is a minor problem.
Exactly the right size for luffa rounds, and also works well when I pour see-through layers with flower or sea shell shaped soaps inside.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Allison • Texas
Date Submitted: 07/15/2016
I Recommend This Product!
|
|
"Excellent " |
|
COMMENTS: Beautiful easy to unmold perfect soaps
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Tami • California
Date Submitted: 06/27/2016
I Recommend This Product!
|
|
"Round Mold" |
|
COMMENTS: My most used mold! Wonderful quality!!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Agnes • New York
Date Submitted: 05/31/2016
I Recommend This Product!
|
|
"Great Mold" |
|
COMMENTS: Great Mold! Will be buying more.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
lovetosoap • Utah
Date Submitted: 05/21/2016
I Recommend This Product!
|
|
"No More Pringles Cans!" |
|
COMMENTS: Great mold! This mold is very durable, and the cavities are just the right size. Pringles cans have served me well, but I'm excited to be able to do round soaps that I can dress up a little more than if I put it in a can. Soaps popped out beautifully.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Ease of Use
• Quality
• Good size
|
|
|
|
|
|
Rachelle • Colorado
Date Submitted: 05/01/2016
I Recommend This Product!
|
|
"Easy to use for CP" |
|
COMMENTS: I bought the COMBO pack of these silicon molds. They are all easy to use and the shapes are all fun. I actually like the square and the oval more than I expected! My CP soap comes out of these very well. I have made plain bars in these already. Now I am thinking about stamping the bars for extra flare.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size
• Shape
• Feel of the bars in your hand
|
|
|
|
|
|
Casey • Michigan
Date Submitted: 05/01/2016
I Recommend This Product!
|
|
"Very nice " |
|
COMMENTS: I used this mold for my first try at melt and pour soap. I found it very easy to use. My soaps came out perfectly! I also like the size of the soap that it makes. I'm sure I will be using it again and again.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Ease of use
• Size
|
|
|
|
|
|
Laura • Alabama
Date Submitted: 03/30/2016
I Recommend This Product!
|
|
"Great quality!" |
|
COMMENTS: I use these molds for MP as well as CP soap and they have held up nicely. They are all just as sturdy now as they were when I purchased them several years ago. For the CP soap, I simply put them in the freezer before pushing them out, and they work perfectly. I plan to order more soon for making bigger batches!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Bath Fizzies & Salts
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Durability
• Size
|
|
|
|
|
|
Anita • California
Date Submitted: 03/29/2016
I Recommend This Product!
|
|
"Perfect Thickness" |
|
COMMENTS: I just used this to make my Loofah scrub soaps.
The thickness, size, and weight of the soap turned out perfect and so professional!
This is a high quality silicone mold. It was easy to pop out the soap and easy to clean! A+
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Sandra • Florida
Date Submitted: 03/19/2016
I Recommend This Product!
|
|
"Love this mold!" |
|
COMMENTS: I have purchased this mold a couple of times and have not been disappointed. It's the perfect size, strong, sturdy, easy to unmold and easy to clean. I use this mold for m&p soap and bath fizzies. Couldn't ask for a better mold!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Bath Fizzies & Salts
|
|
|
|
|
sylvie • New Jersey
Date Submitted: 03/14/2016
I Recommend This Product!
|
|
"Soap Mold" |
|
COMMENTS: One of my favorite soap molds. Makes perfect size bars. I have bought these a couple of times and intend to buy more in the future.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Marina • Illinois
Date Submitted: 03/04/2016
I Recommend This Product!
|
|
"Easy to use!" |
|
COMMENTS: The silicon molds are definitely the way to go with the CPOP soaps! Easy to use, easy to clean! I will be buying again!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP
|
|
|
|
|
Andrea • North Carolina
Date Submitted: 03/03/2016
I Recommend This Product!
|
|
"Easy release for soap and lotion bars" |
|
COMMENTS: I bought this mold for my 4 oz. lotion bars that I place in a flat tin. Easy release and clean up is a breeze. Also started making soaps in these, will be purchasing more!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Lotion Bars & Sticks
|
|
|
|
|
Deborah • Illinois
Date Submitted: 02/29/2016
I Recommend This Product!
|
|
"Always excellent quality." |
|
COMMENTS: All of my favorite soap molds are the CC brand. Very strong and hold their shape.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Pamela • Ohio
Date Submitted: 02/05/2016
I Recommend This Product!
|
|
"Love this mold" |
|
COMMENTS: Use this mold to make my luffa soap, and they came out amazingly easy. Can't wait to make more soap with.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Flexability
• Easy to unmold
|
|
|
|
|
|
Beverly • South Carolina
Date Submitted: 01/30/2016
I Recommend This Product!
|
|
"Very durable " |
|
COMMENTS: I love this soap mold. It's well made and the perfect size for a smaller size soap bar
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Well made
• Good size
|
|
• I wish these came in a two pack
• Lower price
|
|
|
|
Stephanie • Michigan
Date Submitted: 01/26/2016
I Recommend This Product!
|
|
"Nice round bars" |
|
COMMENTS: Produces nice round bars. Thus far, I've been using this mold when I have more soap than fits in my loaves.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Katherene • California
Date Submitted: 01/08/2016
I Recommend This Product!
|
|
"Great circle mold" |
|
COMMENTS: Just got the mold today. I love silicone molds. Will be making the calendula soap this weekend. So excited. :-)
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Great mold
|
|
|
|
|
|
Carrie • Virginia
Date Submitted: 01/03/2016
I Recommend This Product!
|
|
"Great Mold!" |
|
COMMENTS: This mold is perfect for my loofah soaps! The soap is easily unmolded and it is a great quality mold! I bought 1 and loved it so much I bought 4 more!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size
• Price
• Quality
|
|
|
|
|
|
Sandi • New Mexico
Date Submitted: 12/18/2015
I Recommend This Product!
|
|
"Good Quality" |
|
COMMENTS: I wish it were larger
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Jaazia • Mexico
Date Submitted: 12/10/2015
I Recommend This Product!
|
|
"Silicone Molds are great for MP Soap" |
|
COMMENTS: I liked this mold very much, so easy to unmold and perfect size, I used most of the time for embed personalized designs with water soluble paper.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size
• Shape
|
|
|
|
|
|
kelli • California
Date Submitted: 11/29/2015
I Recommend This Product!
|
|
"Basic round silicone mold" |
|
COMMENTS: I am so pleased with this mold!! It seems like such a simple thing, what you see is what you get but I was still surprised when I received it! It's deeper than I was expecting so it makes a perfect, smooth, large chunky bar. Even better, it is extremely easy to unmold both cold process soap and melt and pour. I made 3 batches of cold process yesterday and I found this extremely helpful for the small amounts of soap batter left. I love this mold!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Ashana • Pennsylvania
Date Submitted: 11/18/2015
I Recommend This Product!
|
|
"Nice Mold" |
|
COMMENTS: Makes nice round soaps. I sell out every time I make soaps with the mold. Perfectly round! Takes 2lbs of MP to create 6 bars.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Julie • New York
Date Submitted: 10/31/2015
I Recommend This Product!
|
|
"Professional look" |
|
COMMENTS: I have started using this mold exclusively for my facial bars. They really looK professional and I am loving my round facial bars!
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Jamie • Ohio
Date Submitted: 10/21/2015
I Recommend This Product!
|
|
"Easy to use " |
|
COMMENTS: Easy to use, perfect for popping out melt and pour soap bars with ease. Would recommend and will use all the time.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
LaDonna • Kentucky
Date Submitted: 10/07/2015
I Recommend This Product!
|
|
"Love to make loofah soaps with this mold" |
|
COMMENTS: The cut loofah's work great in this mold and my customers love them !
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Lui • Singapore
Date Submitted: 09/18/2015
I Recommend This Product!
|
|
"Great Mold" |
|
COMMENTS: Good to use and unfolding the soap was easy.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Sara • Iowa
Date Submitted: 09/11/2015
I Recommend This Product!
|
|
"Great mold!" |
|
COMMENTS: I love all of the Crafter's Choice silicone molds. This one is no exception!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Nora • Pennsylvania
Date Submitted: 09/09/2015
I Recommend This Product!
|
|
"silicone mold" |
|
COMMENTS: This mold worked great for my loofah soaps. They are the perfect size and they come clean.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• size
|
|
|
|
|
|
Deana • California
Date Submitted: 09/04/2015
I Recommend This Product!
|
|
"Silicone Mold Round" |
|
COMMENTS: I love this mold. It makes nice round soaps and unmolds very nicely.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Rebecca • New Jersey
Date Submitted: 08/18/2015
I Recommend This Product!
|
|
"Excellent for Duck Soaps" |
|
COMMENTS: I love this mold. I used it for my "duck soaps" and they look awesome!!! Very easy to unmold which was great!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Very easy to use
• Soaps came out great
|
|
|
|
|
|
Lynne • New Mexico
Date Submitted: 08/07/2015
I Recommend This Product!
|
|
"Dual purpose mold" |
|
COMMENTS: This mold is great for making all kind of soaps, from childrens duckie soaps to regular bath soaps. I purchased this with the mold kit but will be ordering more molds individually.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Multi-use
|
|
• nothing
|
|
|
|
Brenna • Kansas
Date Submitted: 07/28/2015
I Recommend This Product!
|
|
"Excellent" |
|
COMMENTS: One of my favorite mold's, use it all the time.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Erin • British Columbia
Date Submitted: 07/13/2015
I Recommend This Product!
|
|
"Still going strong!" |
|
COMMENTS: I ordered this mold over a year ago. It gets used very regularly in my house, and hasn't shown any signs of slowing down. I love it so much, I think I need another!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Very Flexible
|
|
|
|
|
|
Ashley • Pennsylvania
Date Submitted: 07/02/2015
I Recommend This Product!
|
|
"Round Basic Silicone Mold 1602 " |
|
COMMENTS: WOW! I love these molds. They are perfect for lotion bars. Also awesome when you have soap left over after filling a loaf.
|
|
PRODUCT USED IN: Lotion Bars & Sticks
|
|
|
|
|
Sue • Georgia
Date Submitted: 07/01/2015
I Recommend This Product!
|
|
"Tomato Loofah M&P Soaps" |
|
COMMENTS: Worked perfectly to fit the 10" loofah in for the tomato soap slices.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Brandy • Alabama
Date Submitted: 06/10/2015
I Recommend This Product!
|
|
"I love this mold!" |
|
COMMENTS: This mold is very useful in making shaving pucks for men! Highly recommended!
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
tammie • Ohio
Date Submitted: 06/04/2015
I Recommend This Product!
|
|
"easy to use" |
|
COMMENTS: Very easy to use.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Jamie • Arizona
Date Submitted: 05/29/2015
I Recommend This Product!
|
|
"A Favorite Mold" |
|
COMMENTS: This mold is super easy to unmold MP soap from and turned me into a round soap fan. I love that you get a nice solid 5 oz bar from the mold.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Large 5 oz bars
• Ease
|
|
• NOthing
|
|
|
|
Conrad • Colorado
Date Submitted: 05/22/2015
I Recommend This Product!
|
|
"Awesome" |
|
COMMENTS: Works great and releases the soap very easily.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Jennifer • New York
Date Submitted: 05/19/2015
I Recommend This Product!
|
|
"Perfect for a good full size bar" |
|
COMMENTS: This mold is a great addition to our set. Nice full size bar that is easy to hold. This works great with the pre- cut lufas.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Exfoliants & Sugar Scrubs
|
|
|
|
|
Constance Morris • Pennsylvania
Date Submitted: 05/02/2015
I Recommend This Product!
|
|
"Nice basic mold." |
|
COMMENTS: This mold is primarily used by us for the duckie M&P soap. We plan to use it in CP with imbeds.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Ease of use
• Soap releases easily
• Great for decorating
|
|
|
|
|
|
Robyn • Rhode Island
Date Submitted: 04/21/2015
I Recommend This Product!
|
|
"Round Basic Silicone Mold" |
|
COMMENTS: I use my round molds every time I soap! I just love them. Soap releases easily.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Quality
|
|
• Nothing
|
|
|
|
Maria • Georgia
Date Submitted: 02/22/2015
I Recommend This Product!
|
|
"Great product" |
|
COMMENTS: These were so easy to use and clean. The soap just popped out when it was ready.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Lisa • Oklahoma
Date Submitted: 02/09/2015
I Recommend This Product!
|
|
"Perfect Size" |
|
COMMENTS: This is my favorite mold! It is a great size and the soap pops out easily.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Ann Marie • California
Date Submitted: 01/30/2015
I Recommend This Product!
|
|
"sturdy, quality mold" |
|
COMMENTS: this is a fantastic mold, easy to work with, and durable. It is great for my luffa soaps and shaving soaps.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
YTS • Texas
Date Submitted: 01/29/2015
I Recommend This Product!
|
|
"I love it for special recipes" |
|
COMMENTS: I like to use this kind of mold for special soaps. In my case I use this one for facial bars.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP, Soap - Hot Process, Soap - Shampoo Bars, Soap - Shave Shampoo, Lotion Bars & Sticks
|
|
|
|
|
Richard • Nevada
Date Submitted: 01/28/2015
I Recommend This Product!
|
|
"Nice product" |
|
COMMENTS: Happy with this purchase. Makes great size bars, although they didn't come out to be 5oz. A bit hard to unmold even after soap has completely hardened. The bottom of the mold is wider than the top so when pushing the bar out it gets a bit squished.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• size
• durability
|
|
• unmolding due to shape
|
|
|
|
stockdiva • Georgia
Date Submitted: 01/16/2015
I Recommend This Product!
|
|
"Love this mold" |
|
COMMENTS: I have nearly 8 of these molds and I love them. They are great size to make shaving soaps. The molds are very sturdy as well.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• The size
• Sturdy molds
• Easy to clean
|
|
|
|
|
|
Holly • Oklahoma
Date Submitted: 01/08/2015
I Recommend This Product!
|
|
"Perfect Mold !!!" |
|
COMMENTS: I use this mold to make "pill" shaped bath bombs as well as round shave soaps. Perfect size, perfect depth, perfect amount....love this mold !!!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Bath Fizzies & Salts
|
|
|
|
|
kathy • South Carolina
Date Submitted: 01/05/2015
I Recommend This Product!
|
|
"great mold" |
|
COMMENTS: I love the size of this mold. It makes the perfect HP soap cake.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Hot Process, Soap - Shave Shampoo
|
|
|
|
|
Krista • California
Date Submitted: 12/28/2014
I Recommend This Product!
|
|
"Easy to unmold" |
|
COMMENTS: I love this silicone mold. It is super easy to unmold my soap and the size is perfect!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• size, round soap
• easy to unmold
|
|
|
|
|
|
Heather • Florida
Date Submitted: 12/04/2014
I Recommend This Product!
|
|
"Love these" |
|
COMMENTS: I use these mostly for luffa embedded soaps and salt soaps. They make perfect smooth round soaps. I love these for salt bars. Removal is tricky at first but gets easier with use.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Nice consistent size and smooth soap
|
|
• more space between cavities
|
|
|
|
jeff • Florida
Date Submitted: 12/02/2014
I Recommend This Product!
|
|
"round silicone mold" |
|
COMMENTS: THIS MOLD DID A REALLY GOOD JOB FOR OUR MELT AND POUR SOAPS. AS WITH OTHER CRAFTERS CHOICE MOLDS IT WAS VERY PLIABLE AND ALWAYS RETURNED TO THE ORIGINAL SHAPE AFTER UN-MOLDING. A VERY SMOOTH FINISH WAS LEFT ON THE OUTSIDES OF OUR SOAP AND COMPLEMENTS WERE MADE OF HOW NICE OUR SOAP LOOKED. I WOULD BUY AGAIN IF MORE MOLDS WERE REQUIRED. I WAS ABLE TO BARELY SQUEEZE INTO A 4X6 SHRINK BAG, SO A 6X6 WOULD BE FINE TO USE.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Barbara • Ohio
Date Submitted: 11/22/2014
I Recommend This Product!
|
|
"Love my new molds!!" |
|
COMMENTS: Makes cute round bars that are smooth and pop right out of the mold. Cleans up easy too.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP
|
|
|
|
|
Suzanne • Tennessee
Date Submitted: 11/14/2014
I Recommend This Product!
|
|
"Great mold!" |
|
COMMENTS: Love this mold! It makes a beautiful soap bar....a little extra touch from a square bar. It is a perfect size also. I made lavender scented soap with lavender buds in it. They look great!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Perfect size
• Soap unmolds very easily
|
|
• Nothing
|
|
|
|
Brandon • New Mexico
Date Submitted: 11/09/2014
I Recommend This Product!
|
|
"Perfect Size and easy to use" |
|
COMMENTS: These silicone molds are so easy to use. They make a perfect product every time! I absolutely love them. Great for those specialty soaps and shave pucks. Buy several and it can make your production work so much easier.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Shave Shampoo
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy to use
• Perfect product every time
|
|
|
|
|
|
Jecci • Ohio
Date Submitted: 10/27/2014
I Recommend This Product!
|
|
"Great for shaving soap pucks" |
|
COMMENTS: I use this mold to make shaving soap. Soap unmold very easily every time. These soaps fit in the 8oz. low profile plastic jar.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Shave Shampoo
|
|
|
|
|
Home • California
Date Submitted: 10/22/2014
I Recommend This Product!
|
|
"Great Mold " |
|
COMMENTS: I love this mold! I received it in the Calendula Sun M&P kit. It is a great mold for the price, and it is durable as well. My soaps released easily, and each mold makes a decent sized bar of soap. I plan on using it for my cold process soaps as well.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Price
• size
• materials (silicone)
|
|
|
|
|
|
Sybella • Massachusetts
Date Submitted: 10/10/2014
I Recommend This Product!
|
|
"great soap" |
|
COMMENTS: This is a great mold, easy to work with, love the silicone soap molds. I wish they made this is 3 and 4 ounce size. Works great for the rubber ducky soaps!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• quality
• ease of use
|
|
• more sizes
|
|
|
|
Sarah • Oregon
Date Submitted: 10/07/2014
I Recommend This Product!
|
|
"Easy to use" |
|
COMMENTS: Very easy to pop out soap when done!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Suzanne • Pennsylvania
Date Submitted: 10/02/2014
I Recommend This Product!
|
|
"Makes a Nice Bar" |
|
COMMENTS: I like using this mold for my "men's" scents! I think it's a great option for when you are differentiating between men's and ladies scents!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Samantha • Georgia
Date Submitted: 09/30/2014
I Recommend This Product!
|
|
"Amazing" |
|
COMMENTS: Great durability, and the perfect size for face scrubbies and lotion bars. I love it!
|
|
PRODUCT USED IN: Exfoliants & Sugar Scrubs, Face Care, Lotion Bars & Sticks
|
|
|
|
|
Jessica • California
Date Submitted: 09/29/2014
I Recommend This Product!
|
|
"Perfect for luffa" |
|
COMMENTS: I bought this mold specifically to made luffa pedicure soaps and was 100% satisfied! It's the perfect size and the bars come out very easily. It's a great size for facial bars as well.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Stacey • Minnesota
Date Submitted: 09/23/2014
I Recommend This Product!
|
|
"best round mold out there" |
|
COMMENTS: This is with out a doubt the best round mold out there. Sturdy and flexible with shiny finish. Great for my pedi bars!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Jenny • Michigan
Date Submitted: 09/22/2014
I Recommend This Product!
|
|
"Used for my excess" |
|
COMMENTS: I use this mold to make guest soaps with my leftover CP soap batter. The product comes right out and it's so easy to clean up.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
James • Oklahoma
Date Submitted: 09/21/2014
I Recommend This Product!
|
|
"Great Deep mold" |
|
COMMENTS: I love this mold and it is very high quality. Seems a little stiff at the beginning maybe that will fix with time. I lov these molds.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
JENNIFER • Texas
Date Submitted: 09/16/2014
I Recommend This Product!
|
|
"Plain & basic!" |
|
COMMENTS: Plain & basic, no frills...great for a men's set or for shaving pucks. Mold is a bit stiff, I had issuing getting my MP pucks out of the mold even after freezing for 3hrs.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Shave Shampoo
|
|
|
|
|
FRANCIS • Arizona
Date Submitted: 09/11/2014
I Recommend This Product!
|
|
"great for loofah soaps" |
|
COMMENTS: I love it! so easy to remove my loofah soaps from it. Definitely will be buying more.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Shampoo Bars
|
|
|
|
|
Cheryl • Florida
Date Submitted: 09/05/2014
I Recommend This Product!
|
|
"excellent results" |
|
COMMENTS: This mold is very sturdy and makes a nice disk like soap.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - CPOP
|
|
|
|
|
Anthony • West Virginia
Date Submitted: 07/19/2014
I Recommend This Product!
|
|
"works great" |
|
COMMENTS: Easy to unmold, nice and heavy. I love this mold and would love a couple more soon
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Sharon • Ohio
Date Submitted: 06/30/2014
I Recommend This Product!
|
|
"Easy to use." |
|
COMMENTS: Just purchased and love it after the first use. Very easy to unmold and very versital. Beautiful finished product.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy to use
• Perfect size
|
|
|
|
|
|
chris • Ohio
Date Submitted: 06/20/2014
I Recommend This Product!
|
|
"great" |
|
COMMENTS: very nice mold.leaves a nice finish on bars. very sturdy and easy to unfold
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Safe Harbor • North Carolina
Date Submitted: 06/03/2014
I Recommend This Product!
|
|
"Perfect!" |
|
COMMENTS: I bought these to use along with the 7/8 luffas and I am extremely happy with my finished product! Using the silicone mold I was able to easily pop out each soap once it had hardened without much effort. I will definitely continue to use this product and purchase Crafters Choice silicone molds!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Barbara • Kansas
Date Submitted: 05/31/2014
I Recommend This Product!
|
|
"Perfect!" |
|
COMMENTS: Nice weight. Firm yet flexible. So many silicone molds are just too flimsy to use but not this one! Perfect for color stacking soaps and for making the foot scrubbers. I liked it so much I purchased another one!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Good construction. Easy to use.
|
|
|
|
|
|
Cindy • Wisconsin
Date Submitted: 05/21/2014
I Recommend This Product!
|
|
"Love this mold" |
|
COMMENTS: I really love this round mold, its perfect for my loofa soaps. They fit right in and come out shiny. Its a little tough to get them out but, its well worth it, the shape is perfect! Don't waste your time and money on other molds, these are the best!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Quality
|
|
|
|
|
|
Mona • Alabama
Date Submitted: 05/20/2014
I Recommend This Product!
|
|
"Great Value" |
|
COMMENTS: So far so good, these molds are the perfect size and wrapping in a coffee filter is so easy!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Tabitha • Michigan
Date Submitted: 05/07/2014
I Recommend This Product!
|
|
"Good product and size" |
|
COMMENTS: one of my favorite molds. Makes all my loofahs so uniform.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Philip • Ohio
Date Submitted: 05/05/2014
I Recommend This Product!
|
|
"Perfect" |
|
COMMENTS: Great quality, easy to handle & use, allows for individual designs.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Shave Shampoo
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Everything
• Quality
|
|
• Nothing
|
|
|
|
1291 Washington Street • Pennsylvania
Date Submitted: 04/30/2014
I Recommend This Product!
|
|
"Must Have!" |
|
COMMENTS: This mold is perfect for the beginner and for the advanced soap maker. It is easy to use and clean up with it is simple. We love ours and will be buying a few more...
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Melanie • Michigan
Date Submitted: 04/13/2014
I Recommend This Product!
|
|
"Great Mold" |
|
COMMENTS: I really like the size of this mold! And when I un-mold my melt and pour soap it has a nice glossy finish to it from this mold. It is a little tough to un-mold soap from these but if you push with your thumbs with even pressure, it will eventually start to pull away from the mold.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• The size
|
|
|
|
|
|
Judy • Pennsylvania
Date Submitted: 04/09/2014
I Recommend This Product!
|
|
"Great for loofah soap" |
|
COMMENTS: This is the perfect size mold for making loofah soaps. I use a clear melt and pour soap base mostly and very easy to unmold the soap.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Jacquelyn • Ohio
Date Submitted: 04/07/2014
I Recommend This Product!
|
|
"The great flexibility makes this mold easy to use!" |
|
COMMENTS: I love that when I take my soaps out of this mold, they come out easily, with no effort. I use them to make larger body bars and the size is perfect. Sometimes, in deeper molds it is hard to see if the soaps are completely hard. The flexibility and slight transparency of this mold makes identifying when soap is finished much easier.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size
• Shape
|
|
|
|
|
|
Ashley • New York
Date Submitted: 04/03/2014
I Recommend This Product!
|
|
"Easy to use!" |
|
COMMENTS: Love this mold! The other mold that I had been using was a plastic mold, and it would crack every time. It was extremely hard to take the soaps out, so I switched to this mold. I love it. Easy for the soaps to come out, and no problems what so ever. Defintely one of my most favorite and used molds.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy to take out.
• Easy to Clean.
|
|
|
|
|
|
Brandi • Texas
Date Submitted: 03/10/2014
I Recommend This Product!
|
|
"Love!" |
|
COMMENTS: This mold makes full sized round bars with crisp edges. Easy release from the pan. Love it!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy Release
• Good size
|
|
|
|
|
|
Sonja • Tennessee
Date Submitted: 03/07/2014
I Recommend This Product!
|
|
"This is a great mold" |
|
COMMENTS: I like this mold to make round soaps with!! Easy to unmold which is a plus in my book :)
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP, Soap - Hot Process
|
|
|
|
|
Beth • Wyoming
Date Submitted: 03/05/2014
I Recommend This Product!
|
|
"One of my favorites!" |
|
COMMENTS: We use this mold for many of our customer favorites! The bars are perfect circles, they are easy to remove, and the clean up is sooooo easy! This make the perfect size for shaving soaps and large lotion bars!
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process, Soap - Shave Shampoo, Lotion Bars & Sticks
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• easy to fill
• easy to remove finished products
|
|
• I would make it with 12 molds
|
|
|
|
Dorene • Georgia
Date Submitted: 02/18/2014
I Recommend This Product!
|
|
"Love this Mold!" |
|
COMMENTS: I have been wanting this mold for months and it was worth the wait! Makes perfect round circles, soap comes out nice and shiny, strong, and best of all...soap just comes out so easy! No more pushing and tugging, and nail imprints like the plastic one. Love it!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Bath Fizzies & Salts, Exfoliants & Sugar Scrubs, Lotion Bars & Sticks
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Strong
• Nice shine to soaps
• Perfect circles
|
|
|
|
|
|
Alisha • Texas
Date Submitted: 02/13/2014
I Recommend This Product!
|
|
"Soaps Come Out Perfect Every Time" |
|
COMMENTS: I purchased this when they were yellow colored so I haven't had a chance to try the new clear ones. It's built strong so there is no bowing and it has stood up to me pulling and stretching it. The results are consistent and I couldn't be happier.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Durable and Strong
• Easy to clean
• Consistent Results
|
|
|
|
|
|
jessicca • Michigan
Date Submitted: 02/08/2014
I Recommend This Product!
|
|
"LOVE this mold!" |
|
COMMENTS: I got this in the mail 2 days ago & I used it right away for my round loofah soaps. Worked so well, and gave the most perfect round soaps. Super easy to clean & the soaps also popped right out.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy to clean
• Perfoms well in CP
• Perfect for round soaps
|
|
|
|
|
|
Tara • Minnesota
Date Submitted: 01/22/2014
I Recommend This Product!
|
|
"A Must-Have-Mold" |
|
COMMENTS: This mold was out of stock for what seemed like forever... But it was well worth the wait. I'm not sure why, but my customers always seem drawn to the round soap bars. Plus, this mold gives nice, smooth edges and a great-sized bar. Easy to unmold, durable, and very easy to clean. Also the best mold for my loofah bars!!!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Lotion Bars & Sticks
|
|
|
|
|
Laura • Pennsylvania
Date Submitted: 01/22/2014
I Recommend This Product!
|
|
"Nice and clean" |
|
COMMENTS: like this mold for my lotion bars, I find they come out easy and have a nice clean look.. fit nicely into a round tin as long as I do not fill mold all the way!
|
|
PRODUCT USED IN: Soap - Cold Process, Lotion Bars & Sticks
|
|
|
|
|
Katy • North Carolina
Date Submitted: 01/15/2014
I Recommend This Product!
|
|
"Great mold" |
|
COMMENTS: These clear molds are super durable, holds up great and the soap pops out clean and easily.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Patricia • Ohio
Date Submitted: 11/01/2013
I Recommend This Product!
|
|
"Love these!" |
|
COMMENTS: Easily remove the soap. So versatile!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Amber • California
Date Submitted: 10/18/2013
I Recommend This Product!
|
|
"This mold makes beautiful soaps!" |
|
COMMENTS: I sell a lot of M&P soap and this is my primary mold. It produces a beautiful disk of soap with perfectly smooth and glossy surfaces. 5-ounces is a large, impressive bar. It looks appealing, shows well and feels great to use in the shower. These molds are quite flexible, but can tear if you're too rough with them. I've had trouble with only 1 out of 5 molds, though.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Finished soap has smooth, glossy finish.
• Produces a large beautiful disk..
• Relatively easy to unmold soap.
|
|
|
|
|
|
Jan • British Columbia
Date Submitted: 09/10/2013
I Recommend This Product!
|
|
"Perfect circles" |
|
COMMENTS: This mold is so nice for smaller batches of soap. Six quick, perfect bars. Love the clean edges and easy removal.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
| Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information. |
 |
14 Question(s) Shown Below |
| Distributor & Drop Shipper Minimum Advertised Pricing |
As a Crafter’s Choice Distributor and/or Drop Shipper you have agreed to abide by the following Minimum Advertised Price (MAP) for each product and price level. You are permitted to advertise products at a higher price. You may not advertise the products at a lower price. Below you will find the MAP for this product.
|
|
|
|
|
