|
|
Round Guest Silicone Mold 1607 |
|
|
|
 |
Additional
Information |
|
Directions &
Ingredients |
|
SDS &
Documents |
|
|
Craft soap, bath fizzies, lotion bars or shower tabs with this versatile soap mold. Its smaller guest size makes it perfect for a many projects. We love having it on hand with other projects to pour left over soap in it.
Country Of Origin: China
|  | This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a). |
|
|
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.
Directions:
Melt & Pour Soap: Pour melted soap into silicone mold cavities. Allow soap to cool at room temperature until hard. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Cold Process Soap: Pour soap at trace into the mold cavities. After at least 24 hours, gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface and gently push on the bottom of mold until the soap starts to release. Grab hold of the soap with a gloved hand, and allow soap to cure for 4-8 weeks. Note that some cold process soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Cold Process/Oven Process Soap: Pour soap at trace into the mold cavities. Preheat oven to 170ºF then place mold in oven. Turn oven off, and keep soap in oven overnight. The next day remove mold from oven. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Allow soap to cure for 2 to 4 weeks.
Hot Process Soap: Scoop hot process soap into mold cavities. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Lotion Bars: Pour melted lotion bar mixture into mold cavities. Allow mixture to solidify. Carefully remove lotion bars from mold by gently pulling the sides away from the lotion bars, and then push on the bottom of the mold until the lotion bars starts to release. Grab hold of lotion bar and carefully pull out of mold.
Care:
Hand wash in warm sudsy water.
| Average Customer Rating: |
 |
(88 Reviews) |
|
Dawn • Texas
Date Submitted: 03/15/2020
I Recommend This Product!
|
|
"Crafters Choice Round Guest Silicone Mold" |
|
COMMENTS: This came with the melt and pour shaving soap kit that i ordered. Love the size of the bars it makes and the ease of unmolding.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Shave Shampoo
|
|
|
|
|
Valerie • Peru
Date Submitted: 05/11/2019
I Recommend This Product!
|
|
"perfect for guests" |
|
COMMENTS: perfect size for guests and favors
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
christine • Ohio
Date Submitted: 03/13/2019
I Recommend This Product!
|
|
"Excellent" |
|
COMMENTS: Very convenient, easy to clean and hard to destroy!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
alicia • Colorado
Date Submitted: 09/27/2018
I Recommend This Product!
|
|
"Great size for little soaps! " |
|
COMMENTS: These silicone molds work great! Easy to remove soap and perfect size! Great travel or tester soaps!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size
• Material
|
|
• Nothing
|
|
|
|
Maria • Maryland
Date Submitted: 08/14/2018
I Recommend This Product!
|
|
"Great size" |
|
COMMENTS: This mold is perfect for creating smaller soaps and creams. Very easy to un mold and clean also.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Roberta • New Jersey
Date Submitted: 06/21/2018
I Recommend This Product!
|
|
"Great Mold!" |
|
COMMENTS: I love this mold. It is just perfect size for guest soap and samples!
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Stacy • Colorado
Date Submitted: 02/21/2018
I Recommend This Product!
|
|
"Great Versatile Size!" |
|
COMMENTS: I am new to soap making, but tried some melt & pour soaps and also used these for my lotion bars. I love that the mold is silicone and soft sided for easy popping out, but it also has nice edges and corners and a good depth! The smaller guest size is great for lotion bars and many other unique projects!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Lotion Bars & Sticks
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Sturdy Mold
• Great Size
|
|
|
|
|
|
coralleighmoorhouse • Florida
Date Submitted: 08/12/2017
I Recommend This Product!
|
|
"Round Guest Silicone" |
|
COMMENTS: This is a great little mold to put your leftover soap better in. I think it makes a great sample size soap or you could put a few together as a package of some sort. I actually meant to buy the larger size round molds. But this is a rather happy accident and I use it all the time.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Lisa • Utah
Date Submitted: 03/08/2017
I Recommend This Product!
|
 |
"sample sizes" |
|
COMMENTS: this is the perfect size mold for sample sizes of soap, lotion bars etc. Love them.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
|
|
|
|
|
Kelly • North Carolina
Date Submitted: 02/20/2017
I Recommend This Product!
|
|
"Round Guest Mold" |
|
COMMENTS: Used this mold to make bath fizzies. It is spot on for 1.5 oz. Makes a nice size sample or shower fizzy. The fizzy was a little difficult to remove but with a little patience I was able to wiggle it free. A small chunk of the fizzy did come off of several fizzies during removal. I would still purchase another one of these molds. The mold is extremely easy to clean.
|
|
PRODUCT USED IN: Bath Fizzies & Salts
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size of cavity
• Easy to clean
|
|
|
|
|
|
Ginger • Kentucky
Date Submitted: 02/13/2017
I Recommend This Product!
|
|
"Round Guest Mold" |
|
COMMENTS: Very Sturdy! Great Mold!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
debby • Ohio
Date Submitted: 01/12/2017
I Recommend This Product!
|
|
"use for sinus tabs" |
|
COMMENTS: great for making shower steamers.
|
|
PRODUCT USED IN: Bath Fizzies & Salts
|
|
|
|
|
Omni • North Dakota
Date Submitted: 01/10/2017
I Recommend This Product!
|
|
"Perfect Size!" |
|
COMMENTS: I used this mold for my first project ever, the Stress Less Bath/shower tabs. I love, love love this mold!!! Perfect, uniform sizes for the fizzies and I am positive when I try my hand for the first time with soap, they will turn out beautifully. You can make 6 at a time and that's not too bad as a beginner. I highly recommend this mold.
|
|
PRODUCT USED IN: Bath Fizzies & Salts
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Uniform shape
• enough cavities for a good first run
• easy clean up
|
|
• you need two molds in that kit
• have two molds alternating sizes
|
|
|
|
Melinda • Indiana
Date Submitted: 12/16/2016
I Recommend This Product!
|
|
"Perfect Mold " |
|
COMMENTS: I love this mold. It makes the perfect size lotion bars and shower steamers. It also cleans up well.
|
|
PRODUCT USED IN: Bath Fizzies & Salts, Lotions, Creams & Butters
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• size
|
|
|
|
|
|
Drops of Nature • Michigan
Date Submitted: 11/20/2016
I Recommend This Product!
|
|
"Perfect size " |
|
COMMENTS: I like this mold for sample bars for customers or if I want a test bar for myself.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size & shape
|
|
|
|
|
|
Heather • Kentucky
Date Submitted: 10/15/2016
I Recommend This Product!
|
|
"Excellent quality" |
|
COMMENTS: As always, excellent quality mold. I use this for lotion bars and it is the perfect size. And the bars pop right out! I need several more of these!!!
|
|
PRODUCT USED IN: Lotion Bars & Sticks
|
|
|
|
|
Pamela • Oklahoma
Date Submitted: 10/05/2016
I Recommend This Product!
|
|
"Love the size " |
|
COMMENTS: Perfect guest soap size.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Melissa • Nevada
Date Submitted: 08/30/2016
I Recommend This Product!
|
|
"Perfect Gift/Guest size!" |
|
COMMENTS: I love these little trays and own several and need more. They are the absolute perfect size for guest soaps and samplers. They work nice for flat disc fizzies too.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Bath Fizzies & Salts
|
|
|
|
|
Michael • Virginia
Date Submitted: 07/27/2016
I Recommend This Product!
|
|
"Just right" |
|
COMMENTS: Great mold to have handy for left over soap or for guest bars.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Shave Shampoo
|
|
|
|
|
Rebecca • Louisiana
Date Submitted: 07/19/2016
I Recommend This Product!
|
|
"shave soap" |
|
COMMENTS: I made shave soap with this mold and they came out great! Just the perfect size for easy handling. The mold was easy to release and the soap is just so cute! Love it.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• perfect size
• easy release
|
|
|
|
|
|
LaKishia • Maryland
Date Submitted: 07/13/2016
I Recommend This Product!
|
|
"Nice" |
|
COMMENTS: Great for sample size soaps
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Agnes • New York
Date Submitted: 07/03/2016
I Recommend This Product!
|
|
"Nice mold" |
|
COMMENTS: Very nice mold but doesn't hold quite as much as the description says. Great for sample bars and guest soaps. Just finished a large custom order using these molds with good results.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Tanya M • Illinois
Date Submitted: 06/28/2016
I Recommend This Product!
|
|
"Perfect Size" |
|
COMMENTS: Great for my shower fizzes
|
|
PRODUCT USED IN: Bath Fizzies & Salts
|
|
|
|
|
Sharon • Nevada
Date Submitted: 06/16/2016
I Recommend This Product!
|
|
"Round Guest Silicone Mold" |
|
COMMENTS: I love, love, love this little mold! Soap comes out of this mold very easily. I pour my left over MP soap into this mold, package and label as with the bigger bars then sell as a sample bar. Once my customer uses the little round guest soap, they come back for the bigger bars.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• soaps are easy to remove
• makes sales with sample soaps
• price
|
|
• not one thing
|
|
|
|
Tracy • Massachusetts
Date Submitted: 05/29/2016
I Recommend This Product!
|
|
"Great!" |
|
COMMENTS: Works great for lotion bars
|
|
PRODUCT USED IN: Lotion Bars & Sticks
|
|
|
|
|
Elizabeth • California
Date Submitted: 04/07/2016
I Recommend This Product!
|
|
"round guest silicone mold" |
|
COMMENTS: I use this mold mostly for my cp soap samples. I love this mold and will buy more.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Shampoo Bars, Bath Fizzies & Salts, Exfoliants & Sugar Scrubs, Lotion Bars & Sticks, Candles - Soy
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• size
• quality
• versatility
|
|
|
|
|
|
Alysa • Georgia
Date Submitted: 03/20/2016
I Recommend This Product!
|
|
"Excellent Product" |
|
COMMENTS: Love the molds as they are easy to use and clean up is a snap!!!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
brett • Pennsylvania
Date Submitted: 03/16/2016
I Recommend This Product!
|
|
"Fits perfect in hand" |
|
COMMENTS: I love how this fits perfectly in the hand. I prefer a smaller bar of soap for ease of use.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Hot Process, Soap - Shampoo Bars
|
|
|
|
|
Mary • North Carolina
Date Submitted: 03/06/2016
I Recommend This Product!
|
|
"easy to use" |
|
COMMENTS: Another easy to use mold. Soaps pop out easily. I use this one for guest soaps as well as shave and shampoo bars.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Shave Shampoo
|
|
|
|
|
Lui • Singapore
Date Submitted: 03/02/2016
I Recommend This Product!
|
|
"Round Guest Mold" |
|
COMMENTS: Great size for guest hand soap. I also use it for kids project, getting the kids to make small soap that fits their little hands.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Marvel • Oregon
Date Submitted: 02/01/2016
I Recommend This Product!
|
|
"Great mold but retains scent" |
|
COMMENTS: This mold retains scent from batch to batch and that scent is then transferred to the next batch, I now have barbour shop scented lemon soap. This is frustrating when trying to use this mold for more than one product.
That said, it is very easy to unmold, the soaps come out with nice clean lines.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Shave Shampoo
|
|
|
|
|
JACQUELYN • Kansas
Date Submitted: 01/23/2016
I Recommend This Product!
|
|
"Round Guest Mold" |
|
COMMENTS: This mold is great for soaps and fizzies.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Bath Fizzies & Salts
|
|
|
|
|
Mary • California
Date Submitted: 12/02/2015
I Recommend This Product!
|
|
"rafters Choice™ Round Guest Silicone Mold 1607" |
|
COMMENTS: This came in a kit I ordered. Nice quality mold, perfect size for fizzies and shower melts.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Bath Fizzies & Salts
|
|
|
|
|
Liz • Arkansas
Date Submitted: 11/10/2015
I Recommend This Product!
|
|
"Worked great!" |
|
COMMENTS: I am using this to make lotion bars and am very happy with the size and the ease of getting the bar out. I will be ordering more.
|
|
PRODUCT USED IN: Lotion Bars & Sticks
|
|
|
|
|
Kathy • Virginia
Date Submitted: 09/14/2015
I Recommend This Product!
|
|
"good" |
|
COMMENTS: This mold was very easy to use, wash and remove product. I had someone see my mold and wanted to know if homemade baby food could be used in it to freeze. We are going to try. It would be a great size and easy to store.
|
|
PRODUCT USED IN: Bath Fizzies & Salts
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• easy to remove product
• good size
|
|
|
|
|
|
Sharon • Ohio
Date Submitted: 08/14/2015
I Recommend This Product!
|
|
"Perfect" |
|
COMMENTS: I love this mold. It is the perfect size for so many projects. They are durable and extremely easy to unmold.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Nichole • Washington
Date Submitted: 07/30/2015
I Recommend This Product!
|
|
"Great mold for lotion bars!" |
|
COMMENTS: This mold is perfect for my lotion bars. They fit great into a 2 oz. tin with a little room to spare. One tip: don't overfill your mold, it can be tough to close the lid on your tin if you do. Reuses great, unmolds cleanly. I'm going to get another one so I can do more bars at a time!
|
|
PRODUCT USED IN: Lotion Bars & Sticks
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• the silicone makes it easy to pop out
• unmolds with nice sharp edges
• doesn't leave product behind inthe mold
|
|
• An option for a mold with more than 6
|
|
|
|
Sandy • Missouri
Date Submitted: 07/29/2015
I Recommend This Product!
|
|
"Has multiple uses!" |
|
COMMENTS: I use this same mold for lotion bars, bath fizzles and m & p soaps. I love the versatility and durability of this mold. Unmolding and clean up are a breeze.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Bath Fizzies & Salts, Lotion Bars & Sticks
|
|
|
|
|
Stephanie • North Carolina
Date Submitted: 07/15/2015
I Recommend This Product!
|
|
"Nice for extra" |
|
COMMENTS: We use this mold all the time for our extra soap that doesn't fit in our molds. Then we have 1.2 oz sample sized round bars for either ourselves or to use as testers. The mold also makes a nice lotion bar that fits well in my 2 oz round tins. I love love love having extra soap to put in these molds so that I can keep or give away the bonus bars. Didn't give me any trouble when I put it in a 175 degree oven, either.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP, Lotion Bars & Sticks
|
|
|
|
|
Ashley • Pennsylvania
Date Submitted: 07/02/2015
I Recommend This Product!
|
|
"Round Guest Silicone Mold 1607 " |
|
COMMENTS: WOW! I love these molds. They are perfect for lotion bars. Also awesome when you have soap left over after filling a loaf.
|
|
PRODUCT USED IN: Lotion Bars & Sticks
|
|
|
|
|
Emily • Oklahoma
Date Submitted: 07/01/2015
I Recommend This Product!
|
|
"Great Mold" |
|
COMMENTS: This mold is easy to work with, easy to clean, un-molds easy. leaves a nice clean finished product.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Shave Shampoo
|
|
|
|
|
chatti • Colorado
Date Submitted: 06/14/2015
I Recommend This Product!
|
|
"Wonderful" |
|
COMMENTS: This mold works so much better than the square guest mold and isn't as flimsy. I have no trouble getting my cold process soap out of the mold. Great for those leftovers that you don't want to waste.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Sandra • Florida
Date Submitted: 04/13/2015
I Recommend This Product!
|
|
"used for lotion bars" |
|
COMMENTS: I had a little trouble getting the bars out of the mold. Maybe I am doing something wrong? It is just the size I was looking for though...
|
|
PRODUCT USED IN: Lotion Bars & Sticks
|
|
|
|
|
Pamela • Ohio
Date Submitted: 04/11/2015
I Recommend This Product!
|
|
"Great item" |
|
COMMENTS: Used it in a kit I bought. Love the uniform shape, and easy to unmold. Will buy more molds to increase production.
|
|
PRODUCT USED IN: Bath Fizzies & Salts
|
|
|
|
|
Jen • Georgia
Date Submitted: 02/12/2015
I Recommend This Product!
|
|
"Love it" |
|
COMMENTS: It is easy to unmold.
|
|
PRODUCT USED IN: Bath Fizzies & Salts
|
|
|
|
|
stockdiva • Georgia
Date Submitted: 01/26/2015
I Recommend This Product!
|
|
"Great Soap Mold" |
|
COMMENTS: This is a great soap mold to create small guest bathroom soaps. I own several of these. I also use them to put in excess soap from my larger batches. I then use those soaps to give out as samples to my customers who purchase large orders.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Tasha • Ohio
Date Submitted: 01/23/2015
I Recommend This Product!
|
|
"I'm in love!" |
|
COMMENTS: This is a great size for travel soap, small lotion bars, or bath fizzies! I love it and I am trying everything in it. Very sturdy, thick silicone and is perfectly rounded.
|
|
PRODUCT USED IN: Soap - Cold Process, Bath Fizzies & Salts, Lotion Bars & Sticks
|
|
|
|
|
Renee • California
Date Submitted: 01/14/2015
I Recommend This Product!
|
|
"perfect for lotion bars" |
|
COMMENTS: These are the perfect thing for lotion bars. Theyre the perfect size, fit in your hand and wear evenly. Perfect with the 2 oz tins.
|
|
PRODUCT USED IN: Lotion Bars & Sticks
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• perfect size
• easy to pop out
|
|
|
|
|
|
YTS • Texas
Date Submitted: 01/11/2015
I Recommend This Product!
|
|
"nice size for small projects" |
|
COMMENTS: If you are making small project or need a smaller size for your lotion bars or face soap this is your answer. You can keep your final product of the tin container and a nice label and you will have a great presentation.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP, Soap - Hot Process, Soap - Shampoo Bars, Soap - Shave Shampoo, Bath Fizzies & Salts, Lotion Bars & Sticks
|
|
|
|
|
Krista • California
Date Submitted: 12/28/2014
I Recommend This Product!
|
|
"Perfect for samples" |
|
COMMENTS: I really like the 1.5 oz size of this mold. It makes the perfect size for samples.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Gena • Mississippi
Date Submitted: 12/28/2014
I Recommend This Product!
|
|
"Love this" |
|
COMMENTS: Got this mold as part of a kit and I absolutely love it. Easy to use and things don't stick.
|
|
PRODUCT USED IN: Bath Fizzies & Salts
|
|
|
|
|
Sybella • Massachusetts
Date Submitted: 12/04/2014
I Recommend This Product!
|
|
"Love all the silicone molds" |
|
COMMENTS: So appreciate the silicone molds!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• silicone
• easy to use
• consistent
|
|
• more selection
|
|
|
|
Vanessa • Arizona
Date Submitted: 11/30/2014
I Recommend This Product!
|
|
"Lotion bar galore" |
|
COMMENTS: Perfect for batches of lotion bars!
|
|
PRODUCT USED IN: Lotions, Creams & Butters
|
|
|
|
|
Barbara • Oklahoma
Date Submitted: 11/22/2014
I Recommend This Product!
|
|
"Round Guest Silicone Mold 1607" |
|
COMMENTS: This silicone mold produces soap with a professional appearance. The size and shape of the soap are easy to use.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Ashley • New York
Date Submitted: 10/29/2014
I Recommend This Product!
|
|
"Great product" |
|
COMMENTS: I use this for guest soaps and bath fizzies and it is the perfect size. I stash these in the closet for when I have guest come and visit and they love them. Defintely the perfect thing to take with you when traveling or camping.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Bath Fizzies & Salts
|
|
|
|
|
Jecci • Ohio
Date Submitted: 10/29/2014
I Recommend This Product!
|
|
"So easy to unmold" |
|
COMMENTS: I love this mold for my shaving pucks. They are easy to unmold and just the right size to fit inside the jars or mugs.
|
|
PRODUCT USED IN: Soap - Shave Shampoo
|
|
|
|
|
Jenny • Michigan
Date Submitted: 08/04/2014
I Recommend This Product!
|
|
"For the extras." |
|
COMMENTS: I use this mold for the extra cp soap in a batch to make guest soaps. It works great!
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Stacy • Maryland
Date Submitted: 07/28/2014
I Recommend This Product!
|
|
"Nice!" |
|
COMMENTS: This mold makes the perfect size bath fizz tablets.
|
|
PRODUCT USED IN: Bath Fizzies & Salts
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Produces perfect size tablets
• Easy to clean
|
|
|
|
|
|
Mona • Alabama
Date Submitted: 07/21/2014
I Recommend This Product!
|
|
"Perfect for sample sizes" |
|
COMMENTS: perfect for sample sizes of bath soaps or fizzes
|
|
PRODUCT USED IN: Soap - Melt & Pour, Bath Fizzies & Salts
|
|
|
|
|
Bethany • Oregon
Date Submitted: 07/20/2014
I Recommend This Product!
|
|
"This mold is a must! " |
|
COMMENTS: I use this mold all the time! I use it for samples or for kids soaps. The soaps release easily, clean up is also easy. I'll be buying more of these!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
julie • North Carolina
Date Submitted: 07/17/2014
I Recommend This Product!
|
|
"Perfect Size" |
|
COMMENTS: Great size for making party favors. Soaps pop out easily.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Dorene • Georgia
Date Submitted: 07/07/2014
I Recommend This Product!
|
|
"Perfect size" |
|
COMMENTS: This mold is the perfect size for everything, easy release and heavy silicone.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Bath Fizzies & Salts, Exfoliants & Sugar Scrubs, Lotion Bars & Sticks
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Heavy
• Perfect size
• Easy Release
|
|
|
|
|
|
Jennifer • Oklahoma
Date Submitted: 06/24/2014
I Recommend This Product!
|
|
"Perfect" |
|
COMMENTS: This makes the perfect size bar to fit the 2 oz tin. So happy with this mold, may have to buy a second!
|
|
PRODUCT USED IN: Lotion Bars & Sticks
|
|
|
|
|
chris • Ohio
Date Submitted: 06/20/2014
I Recommend This Product!
|
|
"perfect" |
|
COMMENTS: just the right size. nice sturdy mold.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Bath Fizzies & Salts
|
|
|
|
|
Erin • Oklahoma
Date Submitted: 06/05/2014
I Recommend This Product!
|
|
"Perfect" |
|
COMMENTS: These are perfect for lotion bars! They are sturdy and bars remove very easily from mold! I would recommend this product to anyone!
|
|
PRODUCT USED IN: Lotion Bars & Sticks
|
|
|
|
|
Melissa • Mississippi
Date Submitted: 06/02/2014
I Recommend This Product!
|
|
"Great Small Mold" |
|
COMMENTS: Excellent silicone mold for small guest sized soaps, sample soaps, or refill soaps. Makes unmolding and clean up a breeze. It's very smooth which makes for a nice finish.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Debbie • Missouri
Date Submitted: 05/20/2014
I Recommend This Product!
|
|
"Perfect Size" |
|
COMMENTS: This mold is the perfect size for solid lotion bars. There are only 6 cavities, so I've purchased two molds for use with my recipe. My recipe, with this mold, makes exactly twelve 1 oz. bars that fit very well into the 2 oz. shallow tins.
|
|
PRODUCT USED IN: Lotion Bars & Sticks
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• size of cavity, easy to use, sturdy
|
|
• 12-cavity would be nice
|
|
|
|
Angela • Ohio
Date Submitted: 05/08/2014
I Recommend This Product!
|
|
"Great product" |
|
COMMENTS: I use this mold for shave soap bars. They're a perfect size and the soap pops right out when it solidifies. Great product!
|
|
PRODUCT USED IN: Soap - Shave Shampoo
|
|
|
|
|
Tabitha • Michigan
Date Submitted: 05/07/2014
I Recommend This Product!
|
|
"Great size" |
|
COMMENTS: This mold has helped me perfect my loofah soaps. LOVE it and don't know how I did it without it!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Deborah • Barbados
Date Submitted: 04/25/2014
I Recommend This Product!
|
|
"Great mold." |
|
COMMENTS: Great size for guest or sample soap. Soap comes out easily. I'll be ordering more.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Linda • North Carolina
Date Submitted: 04/15/2014
I Recommend This Product!
|
|
"One is not enough!" |
|
COMMENTS: I will definitely be purchasing more of these molds. This mold is perfect for so many products...lotion bars, bath fizzies, shaving and other soaps, etc. There are certain molds that are basic tools of the trade...this is one. The silicone makes it so easy to use and I look forward to getting a lot of use out of these. The soaps and other products come out easily, look nice, and are a perfect size.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Shave Shampoo, Bath Fizzies & Salts, Lotion Bars & Sticks
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Good quality
• Easy to use
• Perfect size for many products
|
|
|
|
|
|
Brandi • Texas
Date Submitted: 04/08/2014
I Recommend This Product!
|
|
"Great size, easy release, can't go wrong!" |
|
COMMENTS: I love this mold. It's just the right size for embedding smaller items into child-sized or guest soaps. Easy release, cleans up well, sturdy, and makes a really shiny finished soap.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
KERRY • Massachusetts
Date Submitted: 04/05/2014
I Recommend This Product!
|
|
"love this mold" |
|
COMMENTS: perfect size for lotion bars
|
|
PRODUCT USED IN: Soap - Melt & Pour, Bath Fizzies & Salts, Lotion Bars & Sticks
|
|
|
|
|
Cyndi • California
Date Submitted: 04/03/2014
I Recommend This Product!
|
|
"Perfect Size" |
|
COMMENTS: I love this mold for making a solid lotion bar that I am making up as a sample. It makes a perfect size sample to fit in my sample size tins. I just poor just below the top and it works great.
|
|
PRODUCT USED IN: Lotions, Creams & Butters
|
|
|
|
|
Maria • Texas
Date Submitted: 01/27/2014
I Recommend This Product!
|
|
"perfect size" |
|
COMMENTS: Perfect for lotion bars that fit into the shallow tins. Great for samples of soaps,shampoo bars etc..
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Shampoo Bars, Lotion Bars & Sticks
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• price
• durable
• size is perfect
|
|
|
|
|
|
Pamela • Florida
Date Submitted: 01/25/2014
I Recommend This Product!
|
|
"Love the Size!" |
|
COMMENTS: This is so great! I wish I had order 2. The size is small, perfect for the kitchen soaps or shampoo size. The silicone is a good quality and thick.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Shampoo Bars, Bath Fizzies & Salts
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• the durability of the mold
• size
|
|
|
|
|
|
Tara • Minnesota
Date Submitted: 01/23/2014
I Recommend This Product!
|
|
"Great Mold!" |
|
COMMENTS: I love the Crafter's Choice Silicone molds! I've slowly been building my "collection" and this was my newest edition. Very durable and easy to clean, plus, products unmold well. Happy customer here!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Bath Fizzies & Salts
|
|
|
|
|
Katy • North Carolina
Date Submitted: 01/15/2014
I Recommend This Product!
|
|
"great mold" |
|
COMMENTS: this is an excellent mold. the quality is amazing and the soap pops out clean and easy, nothing left behind.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• the clear color
• soap comes out perfect and glossy
|
|
|
|
|
|
Peggy • New York
Date Submitted: 01/13/2014
I Recommend This Product!
|
|
"Perfect for lotion bars!" |
|
COMMENTS: Love making my lotion bars using these molds, perfect every time, holding up awesome. Ordering more.
|
|
PRODUCT USED IN: Lotion Bars & Sticks
|
|
|
|
|
Pamela • Arizona
Date Submitted: 01/06/2014
I Recommend This Product!
|
|
"just perfect!" |
|
COMMENTS: This mold makes the BEST lotion bar size. Easy to clean and just wonderful!
|
|
PRODUCT USED IN: Lotions, Creams & Butters
|
|
|
|
|
Georgia • Missouri
Date Submitted: 10/24/2013
I Recommend This Product!
|
|
"My favorite mold" |
|
COMMENTS: Out of three drawers of molds this is my go-to. The soaps are the perfect size for party favors, specialities, and travel. One customer told me it was the perfect size for taking in her bag for a trip. The security guy at the airport said it was perfect for their requirements. I would never have thought about it if the customer hadn't given me the feedback. It's now a big selling point. This is also a great size for luffa soaps. I've never had a problem with the mold and even ordered more of them so I could make big batches in this size.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Great size cavities
• Ease of unmolding really hard soaps
• Holds shape/doesn't bulge
|
|
• Would like more cavities
|
|
|
|
Amber • California
Date Submitted: 10/18/2013
I Recommend This Product!
|
|
"Perfect for trial/travel sized soaps." |
|
COMMENTS: Most of the M&P soap I sell is made in the larger 5-oz round silicone mold. Making smaller trial and travel sized soaps available has made everybody happy. This mold produces perfect little disks of smooth, glossy soap and releases the soaps quite easily. Try a transluscent M&P colored with activated charcoal (I add tea tree, lemon and cedarwood EO's for a great anti-acne bar) and you'll have appealing little hockey pucks. (The 5-oz mold produces fabulous hockey puck soap.) I only wish this mold had 8 or more cavities for the price.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Christen • Florida
Date Submitted: 10/17/2013
I Recommend This Product!
|
|
"Round Guest Mold" |
|
COMMENTS: I bought this mold to make the tablet shower fizzies. The mold is perfect! The silicone is very high quality and can with stand long term use. The guest size circles are the perfect size for a shower fizzie. I also use this mold to pour my left over MP soap into to store in ziploc bags for a future project. I recommend this mold...it's worth every penny.
|
|
PRODUCT USED IN: Bath Fizzies & Salts
|
|
|
|
|
michael • Michigan
Date Submitted: 10/06/2013
I Recommend This Product!
|
|
"amazing" |
|
COMMENTS: these silicone molds are so awesome not only does the soap easily pop out but these molds are practically indestructible
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Jacqueline • New York
Date Submitted: 09/05/2013
I Recommend This Product!
|
|
"Love this!" |
|
COMMENTS: I bought this primarily for lotion bars and they are a perfect size to fit into 2 inch tins, with perfectly straight sides. I only wish that it had more cavities - 12 would be awesome.
|
|
PRODUCT USED IN: Lotion Bars & Sticks
|
|
|
|
|
Adrian • Texas
Date Submitted: 09/04/2013
I Recommend This Product!
|
|
"Round - Guest" |
|
COMMENTS: Perfect for 2oz tins for lotion bars
|
|
PRODUCT USED IN: Lotion Bars & Sticks
|
|
|
|
|
QUATISHA • North Carolina
Date Submitted: 09/03/2013
I Recommend This Product!
|
|
"very sturdy" |
|
COMMENTS: This mold is very sturdy, much better than some of the other silicone molds. Holds up much better for lotion bars
|
|
PRODUCT USED IN: Lotion Bars & Sticks
|
|
|
|
|
Nicole • Georgia
Date Submitted: 06/11/2013
I Recommend This Product!
|
|
"Perfect for Guest Soaps, Samples & Testing" |
|
COMMENTS: Love the ease of unmolding M&P soaps from this mold! I do two specialty soaps in this size and they are absolutely adorable and the perfect size for what I need. Easy to store away. Now if only you had a 12-cavity version... Hint hint...!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
| Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information. |
 |
4 Question(s) Shown Below |
| Distributor & Drop Shipper Minimum Advertised Pricing |
As a Crafter’s Choice Distributor and/or Drop Shipper you have agreed to abide by the following Minimum Advertised Price (MAP) for each product and price level. You are permitted to advertise products at a higher price. You may not advertise the products at a lower price. Below you will find the MAP for this product.
|
|
|
|
|
