|
|
Short (Small) Loaf Silicone Mold 1504 |
|
|
|
 |
Additional
Information |
|
Directions &
Ingredients |
|
SDS &
Documents |
|
|
This smaller loaf is half the size of Crafter's Choice Regular Loaf Silicone Mold making it great for testing out new soap recipes. It makes four one-inch slices of soap.
Country Of Origin: China
|  | This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a). |
|
|
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.
Directions:
Melt & Pour Soap: Pour melted soap into silicone mold. Allow soap to cool at room temperature until hard. Carefully remove loaf from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the loaf and carefully pull out of the mold. Slice into bars.
Cold Process Soap: Pour soap at trace into mold. After at least 24 hours, gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface or cookie sheet and gently push on the bottom of mold until the soap starts to release. Grab hold of the loaf with a gloved hand. Slice into bars and allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Cold Process/Oven Process Soap: Pour soap at trace into the mold. Preheat oven to 170ºF then place mold in oven. Turn oven off, and keep soap in oven overnight. The next day remove mold from oven. Carefully remove loaf from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Slice into bars, and allow soap to cure for 2 to 4 weeks.
Hot Process Soap: Scoop hot process soap into mold. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Carefully remove loaf from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the loaf and carefully pull out of mold. Slice into bars.
Care:
Hand wash mold in warm, sudsy water.
| Average Customer Rating: |
 |
(104 Reviews) |
|
Autumn • Alabama
Date Submitted: 02/11/2020
I Recommend This Product!
|
|
"Great for test batches " |
|
COMMENTS: I love how easy it is to get my soap out of this mold! Perfect for test batches and small custom orders.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Julie • Texas
Date Submitted: 08/30/2019
I Recommend This Product!
|
|
"Perfect Test Batch Mold" |
|
COMMENTS: This mold is perfect for testing a new recipe! I usually cut 1 regular size bar and then several sample bars from it. I use these for market research on the new recipe.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Elise • California
Date Submitted: 07/08/2019
I Recommend This Product!
|
|
"Perfect for small batches or testing new designs! " |
|
COMMENTS: I love this mold. It's very easy to use, a cinch to clean and store. It's the perfect size for testing out 1 oz fragrance samples. You can get 4 regular sized soap bars out of this mold, so it makes a nice little batch. I found that using 15.4 oz of oils in my recipes (I use 33% lye solution) works like a charm for this mold and makes just enough soap batter to fill to the top. The soap unmolds easily as long as you don't try to unmold too soon. The only issue I have with this mold is that after using a few times, the sides begin to bow. It shows a bit in the soap, but it's nothing a planer can't fix. Or maybe I will just try to reinforce the sides with some cardboard and duct tape next time. Other than that, it's perfect!
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy to use
• Easy to clean
• Perfect for experimenting
|
|
• Nothing
|
|
|
|
Mary • New Mexico
Date Submitted: 06/26/2019
I Recommend This Product!
|
|
"Perfect!!!" |
|
COMMENTS: I received this as a gift and it's become my go to loaf mold when I want to try something new! I'm definitely going to buy a couple more of these!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Great practice size
|
|
• Nothing
|
|
|
|
Itanthey • Illinois
Date Submitted: 05/15/2019
I Recommend This Product!
|
 |
"Great product" |
|
COMMENTS: It is a nice hard silicone mold, but a little hard to take the soap out.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Grisel • Florida
Date Submitted: 04/19/2019
I Recommend This Product!
|
|
"perfect size" |
|
COMMENTS: perfect size i can make 4 soap of 1 inch each one
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Melanie • West Virginia
Date Submitted: 04/12/2019
I Recommend This Product!
|
|
"Perfect for my needs!" |
|
COMMENTS: This is the perfect size loaf mold to test new recipes, and new designs. I get 4 bars of soap from each batch.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Perfect size for test batches
• Doesn't bow out in the middle
• High quality sturdy mold
|
|
|
|
|
|
Marilyn • Florida
Date Submitted: 03/20/2019
I Recommend This Product!
|
|
"CONVENIENT" |
|
COMMENTS: TO DO YOUR TEST BATCH THIS IS THE PERFECT SIZE. IS A BIT TALLER THAN THE REGULAR SILICONE MOLDS BUT THATS NOT AN ISSUES.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• EASY SIZE
|
|
• MAKE IT A LITTLE SHORT
|
|
|
|
Andrea • Michigan
Date Submitted: 03/09/2019
I Recommend This Product!
|
|
"Perfect size" |
|
COMMENTS: Perfect size for trial batches- sides bowed out the first use but have been fine since probably user error
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size
|
|
|
|
|
|
Tracy • Massachusetts
Date Submitted: 02/03/2019
I Recommend This Product!
|
|
"Perfect test batch size" |
|
COMMENTS: This mold is the perfect size for a test batch of soap
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Tracy • Ohio
Date Submitted: 12/06/2018
I Recommend This Product!
|
|
"Small Loaf" |
|
COMMENTS: I love using this small loaf when trying out new things. Unmolds easily.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Sharon • Pennsylvania
Date Submitted: 10/11/2018
I Recommend This Product!
|
|
"Small Loaf Mold" |
|
COMMENTS: This is perfect when I need just 4 bars. I got this mold in a kit and I use it all the time. It is great for small special orders.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size
• Easy soap removal
|
|
|
|
|
|
Cathy • Delaware
Date Submitted: 08/17/2018
I Recommend This Product!
|
|
"Easy!" |
|
COMMENTS: Perfect for small batches! Just what I needed!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Linda • Wisconsin
Date Submitted: 03/12/2018
I Recommend This Product!
|
|
"Perfect size!" |
|
COMMENTS: I love this mold! I have been making MP 8 oz. (two 4 oz. bars) most of the time, so I can test different FOs and make different designs. This holds 16 oz. perfectly though and is so easy to unmold. I filled it to the top once, 20 oz., I think.....and it was hard to unmold. Just popped it in the freezer for 15 min. and I was able to unmold easily. Love the silicone and cleaning is a breeze. Thinking about ordering another one.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• for small batches
• Flexible, easy to unmold
• Easy to clean
|
|
• Nothing!
|
|
|
|
Danita • Arkansas
Date Submitted: 01/14/2018
I Recommend This Product!
|
|
"Perfect Gift Soap size!" |
|
COMMENTS: I am so glad I finally broke down and bought this. It makes it so much easier to make 1lb batches of "Gift Soaps" for my friends and family instead of having to make a whole batch. It is also useful for testing new fragrances and colors to see how they will behave. That way if something doesn't perform, you don't have a huge batch of wasted soap! Wish I would have found this sooner when I was still testing and developing my product line! The only negative is that soap is fairly sticky to unmold if you don't use sodium lactate.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP, Soap - Hot Process
|
|
|
|
|
weimarmama • Alabama
Date Submitted: 12/08/2017
I Recommend This Product!
|
|
"Perfect size!!!" |
|
COMMENTS: Perfect size for a small batch. A real life saver, especially if you're just trying out a new recipe or fragrance or if you're short a couple of bars for an order.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP, Bath Fizzies & Salts
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• small size
• easy to unmold
• don't have to line!!!
|
|
|
|
|
|
Deniera • Illinois
Date Submitted: 11/27/2017
I Recommend This Product!
|
|
"Glad to see the smaller size" |
|
COMMENTS: When starting out with cold process soap, you may not want to start out with such a large batch. This is the perfect size....I can't wait to use it.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Great for beginners
|
|
|
|
|
|
Shari • Indiana
Date Submitted: 10/25/2017
I Recommend This Product!
|
|
"Small Silicone Mold" |
|
COMMENTS: Handy size for half batch trials of new additives.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Transparency
• Easy to clean
|
|
• Nothing
|
|
|
|
Natalie • California
Date Submitted: 10/08/2017
I Recommend This Product!
|
|
"Good size mold for small batch soap" |
|
COMMENTS: I love using this mold for small batch of soap. I used it to make melt and pour and cold process soaps and they both turned out great. It will makes 4 to 5 bars ( about 1" thick).
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Tina • Oregon
Date Submitted: 09/30/2017
I Recommend This Product!
|
|
"Silicone Loaf Mold Short (1504)" |
|
COMMENTS: This is perfect for test batches and small batches. Make 4 cut bars for me. I had no bowing of the walls when filled. Made smooth straight sided soap for me. It would be great if mold was stamped with fluid ounces just for convenience and finishing touch of mold.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Good for small batch/test runs
• walls of mold do not bow out
• Makes 4 decent bars
|
|
|
|
|
|
JENE • North Carolina
Date Submitted: 09/23/2017
I Recommend This Product!
|
|
"Perfect" |
|
COMMENTS: Great for small batches
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP, Soap - Hot Process
|
|
|
|
|
Jennifer • Georgia
Date Submitted: 08/04/2017
I Recommend This Product!
|
|
"Great purchase" |
|
COMMENTS: I love this for small batches of soap. Definitely a good purchase. Seems sturdy and releases easily.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Lisa • North Carolina
Date Submitted: 07/30/2017
I Recommend This Product!
|
|
"Love the smaller size!" |
|
COMMENTS: I have been making an 8 inch loaf mold and it was just too big. Just starting out in this business, in my hometown, no store front nor website..so making smaller loafs is ideal! Same quality as the larger mold but it's hard selling 8 of the same type of bars. Maybe once word gets around, maybe the amounts will need to increase back to my other mold size..but for now. I love this smaller option!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Charity • Michigan
Date Submitted: 07/20/2017
I Recommend This Product!
|
|
"Fun Size" |
|
COMMENTS: Nice 1lb batch mold. Makes 3.5 bars when I use my cutter.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Amber • Texas
Date Submitted: 07/11/2017
I Recommend This Product!
|
|
"Tester Batch A+" |
|
COMMENTS: I love this little guy! Perfect for testing out new FO and trying new designs. Will get another for sure.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Christie • Georgia
Date Submitted: 06/21/2017
I Recommend This Product!
|
|
"Very Sturdy little mold" |
|
COMMENTS: This is a great mold to catch the remaining batch and make more bars, it's very strong
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Peggy • Florida
Date Submitted: 06/09/2017
I Recommend This Product!
|
|
"My go to small batch mold" |
|
COMMENTS: I love this little mold! It makes 4 one inch bars and releases easily. The silicone is thick although a bit thinner on the bottom. I like that you can see through it enough to see how your colors are mixing. Great mold for test batches.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Nice size for test batches
• Thick silicone
|
|
• Nothing!
|
|
|
|
Sharon • Utah
Date Submitted: 05/23/2017
I Recommend This Product!
|
|
"Perfect" |
|
COMMENTS: Size just right for new scent testing.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Christina • Ohio
Date Submitted: 05/15/2017
I Recommend This Product!
|
|
"Convient" |
|
COMMENTS: I like to use this small soap mold to do test batches of new fragrances
I usually cut these into about 4 1 inch soaps.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP, Soap - Hot Process
|
|
|
|
|
Sasha • Indiana
Date Submitted: 05/15/2017
I Recommend This Product!
|
|
"Perfect for small batch soap" |
|
COMMENTS: I like to keep my soap fresh, so I make one of these loaves and cut it into 4 chunks to sell. Works great, I can keep a good variety without keeping a lot of soap base on hand if I want. Good size for selling.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Rhonda • Virginia
Date Submitted: 04/25/2017
I Recommend This Product!
|
|
"Great For Test Batches" |
|
COMMENTS: I recently purchased a bunch of sample size 1 oz fragrance oils and needed a mold that would allow me to use them. This mold is perfect for testing out new fragrances or recipes or even designs. It stands alone and doesn't need any side supports. The silicone is thick and sturdy but still easy enough to unmold and cleans up with ease. This is a staple for any soapmaker.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Theresa • Tennessee
Date Submitted: 04/09/2017
I Recommend This Product!
|
|
"Just right" |
|
COMMENTS: This little mold is just right for the extra soap batter I have sometimes.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• The size
|
|
• Nothing
|
|
|
|
Robin • Georgia
Date Submitted: 03/30/2017
I Recommend This Product!
|
|
"Perfect!" |
|
COMMENTS: This mold is perfect if you need to make a quick loaf of melt and pour soap! You should be able to cut a least 4 slices from the made loaf. This is a silicone mold and the loaf comes out very easily! If you are just starting out or a long time soaper this the perfect mold to have in your supplies. Great price!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• The size is perfect to make small loaf
• Great price for a silicone mold.
• Easy release of the melt and pour soap
|
|
|
|
|
|
Cassandra • Texas
Date Submitted: 01/27/2017
I Recommend This Product!
|
|
"Short (Small) Loaf Silicone Mold" |
|
COMMENTS: This silicone mold is nice to use for my test batches. Convenient, small size.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Stacy • Maryland
Date Submitted: 01/12/2017
I Recommend This Product!
|
|
"Great size " |
|
COMMENTS: These molds are very sturdy and a good size for small loafs. Would buy again! Good quality.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP, Soap - Hot Process, Soap - Shave Shampoo
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Great size
• Study
• Good value
|
|
|
|
|
|
Lori • Louisiana
Date Submitted: 12/25/2016
I Recommend This Product!
|
|
"Perfect mold for test batches" |
|
COMMENTS: This is a perfect mold for doing tests batches. It makes 4 one inch rectangular bars. Very sturdy, no need to reinforce. Releases soap easily.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Nicole • Minnesota
Date Submitted: 10/31/2016
I Recommend This Product!
|
|
"Nice for small loaves" |
|
COMMENTS: This is a nice little mold. I like it, but I sometimes have a little difficulty getting the soap out of the mold. This is a perfect size for test batches!
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Alisa • Ohio
Date Submitted: 10/30/2016
I Recommend This Product!
|
|
"Perfect size" |
|
COMMENTS: This mold is my favorite for making test batches.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Pamela • Ohio
Date Submitted: 09/13/2016
I Recommend This Product!
|
|
"LOVE LOVE LOVE" |
|
COMMENTS: Love using this to test out new colors or scent.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Kelly M • Nevada
Date Submitted: 09/10/2016
I Recommend This Product!
|
|
"Perfect for testing recipes..." |
|
COMMENTS: I bought two of these molds for testing recipes, before making a full batch. They are very sturdy and do not bow. Fragrance and color wash out easily. They hold up perfectly during oven process.
|
|
PRODUCT USED IN: Soap - CPOP, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Everything
|
|
• Nothing
|
|
|
|
Reina • Florida
Date Submitted: 09/05/2016
I Recommend This Product!
|
|
"Perfect for Test Batches" |
|
COMMENTS: This is exactly what I was looking for. It allows me to make small test batches - love it.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
|
|
|
|
|
Tracy • Florida
Date Submitted: 08/25/2016
I Recommend This Product!
|
|
"Great for test batches!" |
|
COMMENTS: This mold is the perfect size for testing new colors or new fragrances. I put my soap in the freezer for a bit and it easily slides right out of the mold. I love this mold for trying new things so that if things don't go according to plan I haven't wasted an entire batch!
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Great for test batches
• Easy release of soap
|
|
|
|
|
|
Eva • Kentucky
Date Submitted: 08/23/2016
I Recommend This Product!
|
|
"Perfect small batch mold!" |
|
COMMENTS: I am soo happy with this little easy to use mold! I use it for 1# batches. Easy to unmold & clean, what's not to love! ?!
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Perfect test batch size
• easy to unmold & clean.
• semi translucent.
|
|
|
|
|
|
Tamara • Virginia
Date Submitted: 08/21/2016
I Recommend This Product!
|
|
"Great mold" |
|
COMMENTS: I love the sturdiness of this mold so much that I now have four of these!
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Mary • Ohio
Date Submitted: 08/14/2016
I Recommend This Product!
|
|
"Great" |
|
COMMENTS: I use this for a soap I'm trying out - don't want to make a 40 oz loaf that might not sell. It's great - will be getting another.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Allison • Texas
Date Submitted: 07/07/2016
I Recommend This Product!
|
|
"Great" |
|
COMMENTS: Nice to use to try out recipes using a loaf mold. Can half it to have 4 bars verses 8.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Carl • Ohio
Date Submitted: 07/05/2016
I Recommend This Product!
|
|
"Nice sturdy mold - holds 22.5 fluid ounces" |
|
COMMENTS: Hold 22.5 fluid ounces.
I make small batches.
This works great.
Will buy another one soon
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
LaKeshia • Texas
Date Submitted: 07/03/2016
I Recommend This Product!
|
|
"Perfect for Testing" |
|
COMMENTS: Great small loaf mold for easy testing. Love it. Very Sturdy!!!!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Rebecca • Connecticut
Date Submitted: 06/18/2016
I Recommend This Product!
|
|
"Sturdy Mold" |
|
COMMENTS: Great size for making small batches of soap. The sides are quite stiff. This makes the soap a little bit difficult to remove but also is why the molds do not bow out for me.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size
|
|
|
|
|
|
Beth • Maryland
Date Submitted: 06/04/2016
I Recommend This Product!
|
|
"Excellent size " |
|
COMMENTS: I love this size for trying new soap recipes or experimenting with new fragrance oils.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Sarah • Virginia
Date Submitted: 05/21/2016
I Recommend This Product!
|
|
"Great for making small batch" |
|
COMMENTS: Love this mold to make test batch! The mold is made of sturdy material so I expect the mold to last a long time!
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Thick material
• Doesn't bow
|
|
|
|
|
|
Sylvie • Massachusetts
Date Submitted: 05/08/2016
I Recommend This Product!
|
|
"Great size" |
|
COMMENTS: This is perfect for test batches
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
JENNY • Iowa
Date Submitted: 03/25/2016
I Recommend This Product!
|
|
"GREAT SIZE" |
|
COMMENTS: I am liking this little mold. I am working on teaching a class and love the size of this mold. Everyone will get 4 bars of soap to take home. Contructed very well and the perfect size.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Mia • West Virginia
Date Submitted: 02/04/2016
I Recommend This Product!
|
|
"Nice mold" |
|
COMMENTS: This 1 lb. mold is a bit trickier to unmold than the 3 lb. mold. However, the silicone is nice as are the straight edges. You will get EXACTLY 4 1" slices though, so depending on whether or not you like the end pieces. I filled mine to 20 ounces and preferred that height to just using 16 ounces.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Judi • Florida
Date Submitted: 01/03/2016
I Recommend This Product!
|
|
"Great Test Mold" |
|
COMMENTS: I love this little mold for testing new FOs or practicing different techniques. Makes 4 nice sized bars.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
lmbbcare • New Jersey
Date Submitted: 12/04/2015
I Recommend This Product!
|
|
"Great Product" |
|
COMMENTS: I think this product is awesome!!! My cp soap come out nice and easy and all together. Also I like,the size for when I don't want to make alot of soap.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Melinda • Tennessee
Date Submitted: 10/21/2015
I Recommend This Product!
|
|
"Love the small size" |
|
COMMENTS: This is excellent for testing small batches of soap. Will purchase again
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size and price
|
|
• Nothing
|
|
|
|
Marie • South Dakota
Date Submitted: 10/17/2015
I Recommend This Product!
|
|
"Nice Size " |
|
COMMENTS: This mold is the perfect size for 4 bars of soap. It's also good for pouring any extra soap and using to make embeds.
The bottom is very thin so be careful removing your soap from the mold.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Angela • Georgia
Date Submitted: 10/08/2015
I Recommend This Product!
|
|
"Nice mold for small batches" |
|
COMMENTS: This mold is a great size for making test batches of cp and hp soap. It makes perfectly square loaves with no bowing
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Good size to test small batches
• Cleans easily
• Does not bow
|
|
|
|
|
|
Veronica • Texas
Date Submitted: 10/06/2015
I Recommend This Product!
|
|
"easy release" |
|
COMMENTS: perfect for try with small batches or tilting technique
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Dawn • Wisconsin
Date Submitted: 09/28/2015
I Recommend This Product!
|
|
"Small Silicone Loaf Mold" |
|
COMMENTS: I tried using drawer containers as a substitute mold, but it never worked out for me especially as they sometimes have a hump on the bottom. I didn't want to make a large loaf, so this one is perfect for me. If you fill it right to the top it holds 20 oz but I find it difficult to unmold the soap when it's filled to the top so I fill with 19.6 oz. I cut the loaf into 4 large bars.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Samantha • South Carolina
Date Submitted: 08/24/2015
I Recommend This Product!
|
|
"Awesome" |
|
COMMENTS: I love this little mold! Perfect for test batches! Am going to purchase another one. I used 14 oz of oils for this mold and it didn't come to the top so I would suggest using at least 15 oz.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Pennie • Maine
Date Submitted: 08/06/2015
I Recommend This Product!
|
|
"Good But thin Bottom" |
|
COMMENTS: Shows differently in picture, Is still very usable just very thin bottomed.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size and easy of use
|
|
• thickness of bottom.
|
|
|
|
Lynne • New Mexico
Date Submitted: 08/05/2015
I Recommend This Product!
|
|
"nice test size" |
|
COMMENTS: I like to use this mold to test new recipes, designs and small special orders...but it is not as sturdy as it's larger version (44 oz. size). The sides are the same thickness as the larger version but the botton is much thinner than the sides and if the mold needs to be moved after pouring, it bows considerably and the soap gets messed up. Sliding it across the countertop is the only way to move it without distrubing the soap...not always feasible.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• size
|
|
• bottom thickness - make sturdier
|
|
|
|
BARBARA • Maryland
Date Submitted: 07/18/2015
I Recommend This Product!
|
|
"Best.Mold.Ever!" |
|
COMMENTS: Wow! What can I say? I am definitely NOT a person who routinely needs a 5lb mold for my soapmaking, but I like to experiment with different formulations. So this is the perfect size for trial batches.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Hot Process, Soap - Shampoo Bars
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• compact size
|
|
• would love to see a 1lb rectangular mold
|
|
|
|
Dorene • Georgia
Date Submitted: 07/11/2015
I Recommend This Product!
|
|
"Just enough to experiment with!" |
|
COMMENTS: I love this small little mold. It is just large enough to experiment with, use only when there is a need for about 4 pieces of soap and you don't want to use individual molds, throw all the scraps in and make something else. Sides are strong and doesn't bow, (although the bottom is thinner, it hasn't ripped) just the perfect size.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• doesn't bow
• perfect size
|
|
• stronger bottom
|
|
|
|
Gloria • Florida
Date Submitted: 06/15/2015
I Recommend This Product!
|
|
"Wonderful!" |
|
COMMENTS: This little guy is a life saver! I use this 1504 mold to hold extra soap batter. I hate running around like a mad person trying to find something, anything to hold my extra batter. Using 1504 mold saves your nerves for sure!
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Melissa • Pennsylvania
Date Submitted: 06/12/2015
I Recommend This Product!
|
|
"Great Mold" |
|
COMMENTS: I love this mold for intricate designs with MP soap- at least if I screw up, it not a huge waste :) Crafters Choice Silicone Molds are great quality- not like some cheap, flimsy molds I have ordered on the internet.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
YTS • Texas
Date Submitted: 06/01/2015
I Recommend This Product!
|
|
"Great molds" |
|
COMMENTS: Great Molds! I absolutely love all the Crafters Choice molds. They last, don't bow, easy to clean, and even safe in the oven!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP, Soap - Hot Process, Soap - Shampoo Bars, Soap - Shave Shampoo
|
|
|
|
|
Aileen • North Carolina
Date Submitted: 05/29/2015
I Recommend This Product!
|
|
"Why didn't I get this sooner!!" |
|
COMMENTS: I am very new to soap making so I like testing my formulas in mini batches. I was using a cardboard box, but it was difficult to remove the plastic liner I would use. This is fantastic!!!!! Great size easy to remove soap and more uniform cuts. I only wished I had ordered two!!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Love the size
• Easy to remove soap
• Easy to clean
|
|
|
|
|
|
Melissa • Texas
Date Submitted: 05/28/2015
I Recommend This Product!
|
|
"Fun Little Mold" |
|
COMMENTS: Perfect to hold soap made with 16 oz of oils. Easily flexible. Great for small batches or test batches.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Stacey • South Carolina
Date Submitted: 05/18/2015
I Recommend This Product!
|
|
"Love this mold!" |
|
COMMENTS: I use this mold a lot for test batches and the soap comes out easily and cleanly. I would recommend!
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Lisa • Virginia
Date Submitted: 05/12/2015
I Recommend This Product!
|
|
"a must have" |
|
COMMENTS: I love silicone molds, they are great so easy to use, don't stick, don't break, or crack no need to line them like you need to with a wooden mold.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• doesn't stick
• ease of use
• don't crack
|
|
|
|
|
|
1600 Elm Creek Dr. • Ohio
Date Submitted: 04/30/2015
I Recommend This Product!
|
|
"New to soap making" |
|
COMMENTS: This is my first attempt to soap making. I choose this mold to start out with because I didn't want a lot of batches of soap sitting around. This is the perfect little mold for beginners or if you just want a few bars of soap. Very easy to use and it unmolded nicely.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Sharita • Maryland
Date Submitted: 04/27/2015
I Recommend This Product!
|
|
"Sample Size" |
|
COMMENTS: This product is great for whipping up small batches of soap for testing or personal use. I have used it over a dozen times and it works like the first time each time.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Trisha • Idaho
Date Submitted: 04/16/2015
I Recommend This Product!
|
|
"Nice and sturdy" |
|
COMMENTS: This is the perfect mold to make a smaller or test batch of soap with. Need to buy a few more because one is just not enough when you are wanting to make a bunch of new test batches.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Saarene • Pennsylvania
Date Submitted: 04/09/2015
I Recommend This Product!
|
|
"1 lb loaf mold" |
|
COMMENTS: Perfect for small test batches and practice runs.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Merlinda • New York
Date Submitted: 04/07/2015
I Recommend This Product!
|
|
"Perfect for test batch" |
|
COMMENTS: I bought three of these molds for testing small batches. They are just what I expected. Perfect.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Chelsie • North Carolina
Date Submitted: 03/31/2015
I Recommend This Product!
|
|
"perfect for sample molds" |
|
COMMENTS: Bought this as a first time soap maker. Makes about 4 bars. Very easy to get bars out !!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Lauren • Nevada
Date Submitted: 03/22/2015
I Recommend This Product!
|
|
"great for test batches" |
|
COMMENTS: This is such a nice little mold I use it to test fragrance oils and also when I have a little extra soap I throw it in this mold and I get a bar or two for myself. I would definitely buy this again.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• perfect size for test batch
• sides hold up and don't bow
|
|
|
|
|
|
Stacy • Missouri
Date Submitted: 03/14/2015
I Recommend This Product!
|
|
"Perfect size for small batch" |
|
COMMENTS: This 1 lb. mold is perfect to try out new colors or scents. I had a bit of trouble unmolding the first couple times, but I got the hang of it pretty quickly. I will use this for rebatch purposes.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Vanessa • Arizona
Date Submitted: 02/28/2015
I Recommend This Product!
|
|
"Test Batch Mold" |
|
COMMENTS: So much easier than lining a wooden mold! This size makes it perfect for test batches as well! Love this mold
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Beverly • Ohio
Date Submitted: 02/18/2015
I Recommend This Product!
|
|
"Sweet size!" |
|
COMMENTS: Great for overflow soap batter. Perfect for trying out a new recipe.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size & ease of release.
|
|
• Nothing.
|
|
|
|
archana • California
Date Submitted: 02/12/2015
I Recommend This Product!
|
|
"Perfect size" |
|
COMMENTS: Perfect for small projects or testing fragrances. Holds well and does not buckle on the sides.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Queenbee • Wisconsin
Date Submitted: 02/06/2015
I Recommend This Product!
|
|
"The best mold for small quantity test batches " |
|
COMMENTS: This is a great mold ...it's the perfect size for a small batch. It's not a flimsy mold it's built Strong and sturdy...I can pick it up and not disturb my project. Unmolds very easy with clean crisp lines. This mold is also great for pouring thin layers to roll for embeds as well. All in all its one of those must have molds that's very durable and it's quality crafted to last
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Perfect size small batch recipe
• Quality built and strong
|
|
|
|
|
|
michelle • Michigan
Date Submitted: 01/29/2015
I Recommend This Product!
|
|
"Great for Making and Testing Batches" |
|
COMMENTS: I love this mold. I am able to do a small test batch.
|
|
PRODUCT USED IN: Soap - Shave Shampoo
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Small
• Easy Removal
|
|
|
|
|
|
stockdiva • Georgia
Date Submitted: 01/26/2015
I Recommend This Product!
|
|
"Nice size to do test samples" |
|
COMMENTS: This is a nice sized mold to do soap test samples so you won't waste a lot of product testing new recipes. I would suggest using sodium lactate to help release the soap from the mold though.
|
|
PRODUCT USED IN: Soap - CPOP
|
|
|
|
|
Tonja • Florida
Date Submitted: 01/25/2015
I Recommend This Product!
|
|
"Great mold" |
|
COMMENTS: This is one of the first crafter's choice molds that I purchased - love the size. I ordered 2 other molds as well but have not used them yet, I am sure I will be pleased with them as well.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size
|
|
• nothing
|
|
|
|
Deborah • Barbados
Date Submitted: 01/21/2015
I Recommend This Product!
|
|
"Great for small batches" |
|
COMMENTS: I have two of these and I love them. They are great for doing test batches or soap challenges.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Tranquility Mountain • North Carolina
Date Submitted: 01/20/2015
I Recommend This Product!
|
|
"The perfect mold for experimenting!" |
|
COMMENTS: This is the best mold I've found for trying out new colorants and fragrances! If I don't like the soap it's no big deal because I've not wasted a large amount of ingredients. If the soap turns out great I have 4 bars the perfect size to package and sale. This mold is exactly what I've been looking for!
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size
• Dimensions
|
|
|
|
|
|
cheryl • New York
Date Submitted: 01/20/2015
I Recommend This Product!
|
|
"soap bars" |
|
COMMENTS: Being a small mold this is easy to handle and stable. Released M&P well.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
|
|
• i would offer more sizes
|
|
|
|
Erin • Georgia
Date Submitted: 01/02/2015
I Recommend This Product!
|
|
"Great Mold!!" |
|
COMMENTS: I love this 1lb mold. It is perfect for making smaller custom batches!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP, Soap - Hot Process
|
|
|
|
|
Goatrocks • Washington
Date Submitted: 12/27/2014
I Recommend This Product!
|
|
"Love this mold!" |
|
COMMENTS: This wonderful mold is absolutely perfect for small test batches. Cuts into four 1" bars. It washes out easily as well. The demension of bar soap is perfect in my book. :)
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Sapnalona • Florida
Date Submitted: 12/22/2014
I Recommend This Product!
|
|
"Wonderful for Small Test Batches" |
|
COMMENTS: I use this to make facial soap and small test batch CP body soap. When I see the success, I go ahead and make another 40 oz batch with other silicone loaf I bought from here.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Lisa • Indiana
Date Submitted: 12/04/2014
I Recommend This Product!
|
|
"small loaf mold" |
|
COMMENTS: This is the perfect size to try new scents you have never tried before.This way you can try them and see how the behave. This mold makes 4 4oz bars. I am very happy with this mold.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• the small mold
|
|
• nothing
|
|
|
|
Barbara • Ohio
Date Submitted: 11/22/2014
I Recommend This Product!
|
|
"Love my new molds!!" |
|
COMMENTS: Perfect for test batches or leftover soap that won't fit into individual molds.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP
|
|
|
|
|
emmelou • Indiana
Date Submitted: 10/29/2014
I Recommend This Product!
|
|
"mini mold" |
|
COMMENTS: Love this mini loaf mold for doing small 3 bar test batches. I can try out new fragrances, color, and techniques without using up pounds of my supplies. Very sturdy and well made.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Lisa • Illinois
Date Submitted: 10/26/2014
I Recommend This Product!
|
|
"Perfect" |
|
COMMENTS: Great size for a beginner like myself. Releases easily.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Cindy • Mississippi
Date Submitted: 10/25/2014
I Recommend This Product!
|
|
"I am in love with this lil joker!" |
|
COMMENTS: I love this mold. It's great for test batches when I'm trying out a new fragrance oil or color. The soap slips right out and it's so easy to clean. It's perfect. I will be ordering more of these!
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy to use
• Easy to clean
• Soap slips right out.
|
|
• Wish it was a bit cheaper
|
|
|
|
Kris • Minnesota
Date Submitted: 10/17/2014
I Recommend This Product!
|
|
"Perfect for me!" |
|
COMMENTS: This loaf mold is the perfect size for me and what i am doing with my soaps. I own an oline shop and dont make huge batches at a time so this is perfect becuase i can make a small batch as it is ordered.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Andrea • Michigan
Date Submitted: 09/07/2014
I Recommend This Product!
|
|
"Great for testing" |
|
COMMENTS: Love this sturdy mold for testing small batches in order to sample new Fragrances. There is no waste, I get 3 perfectly sized and shaped bars and unmolding is so easy.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Amelia • Alabama
Date Submitted: 09/03/2014
I Recommend This Product!
|
|
"loved it !!!!" |
|
COMMENTS: i loved this mold makes about a pound of soap.I used it to make a pound of orange 15x essential oil soap just loved it will order more of this little mold. great price too!!!!
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• size
• shipping
|
|
|
|
|
|
Shannon • California
Date Submitted: 09/01/2014
I Recommend This Product!
|
|
"Perfect for 4 bar batches!" |
|
COMMENTS: This is great for those little batches! I want to buy more!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Maria • Pennsylvania
Date Submitted: 08/14/2014
I Recommend This Product!
|
|
"Charming little Mold" |
|
COMMENTS: Sturdy,great product!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Hot Process
|
|
|
|
| Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information. |
 |
6 Question(s) Shown Below |
| Distributor & Drop Shipper Minimum Advertised Pricing |
As a Crafter’s Choice Distributor and/or Drop Shipper you have agreed to abide by the following Minimum Advertised Price (MAP) for each product and price level. You are permitted to advertise products at a higher price. You may not advertise the products at a lower price. Below you will find the MAP for this product.
|
|
|
|
|
