|
|
Tall & Skinny Loaf Silicone Soap Mold 1505 |
|
|
|
 |
Additional
Information |
|
Directions &
Ingredients |
|
SDS &
Documents |
|
|
This mold is a new twist on the classic regular loaf. It is basically the regular loaf on its side making a taller and skinnier bar of soap. This mold makes eight one-inch bars of soap.
Makes (1) 40 - 44 oz. Loaf
Loaf Dimensions: 3.5" high x 2.5" wide x 8" long
Country Of Origin: China
|  | This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a). |
|
|
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.
Directions:
Melt & Pour Soap: Pour melted soap into silicone mold. Allow soap to cool at room temperature until hard. Carefully remove loaf from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the loaf and carefully pull out of the mold. Slice into bars.
Cold Process Soap: Pour soap at trace into mold. After at least 24 hours, gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface or cookie sheet and gently push on the bottom of mold until the soap starts to release. Grab hold of the loaf with a gloved hand. Slice into bars and allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Cold Process/Oven Process Soap: Pour soap at trace into the mold. Preheat oven to 170ºF then place mold in oven. Turn oven off, and keep soap in oven overnight. The next day remove mold from oven. Carefully remove loaf from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Slice into bars, and allow soap to cure for 2 to 4 weeks.
Hot Process Soap: Scoop hot process soap into mold. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Carefully remove loaf from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the loaf and carefully pull out of mold. Slice into bars.
Care:
Hand wash mold in warm, sudsy water.
| Average Customer Rating: |
 |
(73 Reviews) |
|
Kathy • Indiana
Date Submitted: 04/26/2024
|
 |
"Tiny mold" |
|
COMMENTS: My bad because I assumed it was the same size as the silicone tall and skinny loaf molds sold by other suppliers. This is so much smaller and a bit more expensive. I would recommend shopping around. This is not a good value.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP
|
|
|
|
|
Kisha • New Jersey
Date Submitted: 04/22/2020
I Recommend This Product!
|
|
"silicone loaf and other products" |
|
COMMENTS: I like the silicone mold loafs and the essential oils you carry . I'm also so a fan of the soap kits you can create on your own .
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Hot Process, Soap - Shampoo Bars, Soap - Shave Shampoo, Liquid Soap & Washes, Bath Fizzies & Salts, Exfoliants & Sugar Scrubs, Face Care, Hair Care, Lip Care, Lotion Bars & Sticks, Lotions, Creams & Butters, Massage Oils, Candles - Paraffin, Candles - Soy
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• I love the quality of the products
|
|
• nothing
|
|
|
|
Shakirah • New Jersey
Date Submitted: 07/29/2019
I Recommend This Product!
|
|
"works well" |
|
COMMENTS: I like the skinny size of the bars.
|
|
PRODUCT USED IN: Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
|
|
• Wish it was longer
|
|
|
|
Kayla • New York
Date Submitted: 04/29/2019
|
|
"Bows out when full" |
|
COMMENTS: It's a decent mold, but it bows out a lot once all the soap is in. The curve is very noticeable once the bars are cut..
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy to unmold
• Nice size
|
|
• Make it sturdier
• Don't have it bow out as much
|
|
|
|
Sabrina • California
Date Submitted: 04/22/2019
I Recommend This Product!
|
|
"excellent silicone mold" |
|
COMMENTS: this mold came in a kit i purchased
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• silicone
• ease of soap removal
• easy clean
|
|
|
|
|
|
Yesenia • New York
Date Submitted: 03/10/2019
I Recommend This Product!
|
|
"Favorite!!!" |
|
COMMENTS: Wow!!!! The quality of this is...amazing!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Theresa • Montana
Date Submitted: 01/02/2019
I Recommend This Product!
|
 |
"Tall Skinny Mold" |
|
COMMENTS: I really like this mold a lot except it does bow a little, so I support it with whatever I can find after I pour my soap in it. Easy to unmold. I do use sodium lactate to help with that. Love the designs I can make with this taller mold!
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy to unmold
• Love the taller soaps!
|
|
• Make it sturdier so it won't bow
|
|
|
|
Tracy • Ohio
Date Submitted: 12/06/2018
I Recommend This Product!
|
|
"Works Great!" |
|
COMMENTS: I really like this tall and skinny mold in silicone. It’s easy to unmold and sturdy. It does slightly bow but gives a nice look to cut bars of soap.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Essentially Naturals • Tennessee
Date Submitted: 06/20/2018
I Recommend This Product!
|
|
"I love this mold" |
|
COMMENTS: I use the mold every single day and it's not let me down once! I love how it's reinforced on the sides and doesn't require much care. It produces perfect tall & skinny bars of soap! I highly recommend you purchase!
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Sandra Lee • North Carolina
Date Submitted: 06/18/2018
I Recommend This Product!
|
|
"Great Shape" |
|
COMMENTS: The tall and skinny loaf has a great shape, a sideways twist to the regular loaf mold. Sturdy and doesn't bow out.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• shape
• easy to remove from mold
• size
|
|
• not a thing
|
|
|
|
Cookie • Maryland
Date Submitted: 05/28/2018
I Recommend This Product!
|
|
"Very sturdy " |
|
COMMENTS: This mold holds very well. It doesn’t bow at all. Releases easily.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Sturdy
• Easy release
• Holds shape
|
|
|
|
|
|
Diane • Georgia
Date Submitted: 03/08/2018
I Recommend This Product!
|
|
"Perfect size" |
|
COMMENTS: This tall & skinny mold is perfect for embeds that you want verticle. I also like the 8" size because specialty bars mean left unsold soap.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• size
|
|
|
|
|
|
Pamela • Florida
Date Submitted: 01/20/2018
|
|
"Hard to Unmold" |
|
COMMENTS: I loved the tall look and was very excited to use this mold; however, it has been such a bear to unmold that it really doesn't seem worth it. I am afraid I am going to damage the design in my soap just to get it out. I have tried several of the unmolding techniques and it is just frustrating.
I wonder if there could be a way to have snap sides like with the columns and ball molds?? That might help to unmold without damaging the soap. Just a thought.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• the tall skinny look
|
|
• unmolding made easier
|
|
|
|
sally • Florida
Date Submitted: 08/16/2017
I Recommend This Product!
|
|
"Nice size" |
|
COMMENTS: I finally decided on this mold for my soaps because they fit nicely in your hand.
|
|
PRODUCT USED IN: Soap - Hot Process
|
|
|
|
|
Lisa • North Carolina
Date Submitted: 06/28/2017
|
|
"Hard to unmold" |
|
COMMENTS: I still use this mold but I know from the start, that I am going to work my tail off to get it the soap out. Love the tall soaps but the unmolding issue causes me not to use it as I would like.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Elisabeth • Missouri
Date Submitted: 06/09/2017
I Recommend This Product!
|
|
"Very sturdy" |
|
COMMENTS: This is a very sturdy mold. However, if you find it starts to bow on the sides since it's so tall I just put some books on the side to give it a little extra support.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• sturdy
|
|
|
|
|
|
Terry • Florida
Date Submitted: 05/27/2017
I Recommend This Product!
|
|
"Works good" |
|
COMMENTS: Was expecting a little longer. Will order a larger one next time.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Everything
|
|
• Nothing
|
|
|
|
Sharon • Utah
Date Submitted: 05/23/2017
I Recommend This Product!
|
|
"Good tall and skinny" |
|
COMMENTS: I did have bowing problems, propped a brick on each side of mold to hold it where I wanted it.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Kelley • Indiana
Date Submitted: 04/24/2017
I Recommend This Product!
|
|
"Tall & Skinny Loaf Mold" |
|
COMMENTS: Love the size of the bars of soap. Just wished the center did not bow when filled to the top.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Lori • Washington
Date Submitted: 04/20/2017
I Recommend This Product!
|
|
"so excited" |
|
COMMENTS: I have been looking all over for a tall skinny mold. I found them on numerous sites but the cost on the other sites was very prohibitive. I was excited when I found this one and the price is very reasonable. I bought two and I'm glad I did. When I calculated out the amount of oils needed, I realized that I can continue making the exact same recipe as I always do because the amount of oils is exactly what's needed to make the two loaves. It was as though it was meant to be.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• size
• shape
|
|
• nothing
|
|
|
|
Edina • California
Date Submitted: 03/29/2017
I Recommend This Product!
|
|
"Tall n Skinny mold" |
|
COMMENTS: Wonderful
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Veronica • California
Date Submitted: 03/13/2017
I Recommend This Product!
|
|
"Love this mold!" |
|
COMMENTS: Sturdy mold, no issues removing finished soap. Very satisfied.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Sturdy
• Easy removal
|
|
• Longer tall and skinny loafs
|
|
|
|
SHERRIE • Virginia
Date Submitted: 03/12/2017
I Recommend This Product!
|
|
"Tall Skinny Mold" |
|
COMMENTS: This is a great mold. So excited to have it in my collection for variety.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Christine • Massachusetts
Date Submitted: 03/11/2017
I Recommend This Product!
|
|
"Wonderful Mold" |
|
COMMENTS: It looked smaller then my usual bread loaf mold but it has the same volume. It made a nice tall, narrow bar. It needs a little support in the middle but over all no real issues
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Tonya • Missouri
Date Submitted: 03/10/2017
I Recommend This Product!
|
|
" Tall & Skinny Loaf Silicone Soap Mold" |
|
COMMENTS: I just love the look of my soaps using this mold. I had so many size molds, so I ordered 5 of these and problem solved. Now all my soaps are the same size!
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Joanna • Pennsylvania
Date Submitted: 03/02/2017
I Recommend This Product!
|
|
"A must have!!" |
|
COMMENTS: I feel so spoiled! Using homemade molds, fumbling with freezer paper, to using a no fuss mold! I feel like I'm forgetting to do something, because I no longer have to waste time just preparing my mold! I ordered one to test it out first, I'm definitely ordering more! Great quality, as I knew it would be and now I will have a coupon to order more!
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Excellent quality
• Less mistakes and saves time
• Wrinkle free soap!!!
|
|
|
|
|
|
Cynthia • Illinois
Date Submitted: 02/24/2017
I Recommend This Product!
|
|
"Awesome Mold!" |
|
COMMENTS: Very nice mold for a tall and skinny look soap. I've been using this mold for years and never wrote a review in addition I have the same one I bought years ago. Good quality and obviously lasts a long time.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Good Quality
|
|
|
|
|
|
Melissa • Pennsylvania
Date Submitted: 02/22/2017
I Recommend This Product!
|
|
"Great Mold!!" |
|
COMMENTS: Hands down, my favorite mold!
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
|
|
|
|
|
Kim • South Carolina
Date Submitted: 02/06/2017
I Recommend This Product!
|
|
"Tall Skinny Mold" |
|
COMMENTS: Love this mold 1st time using it was difficult to remove the soap. by the 3rd time it was a breeze
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Karen • Ohio
Date Submitted: 02/03/2017
I Recommend This Product!
|
|
"nice mold" |
|
COMMENTS: the only issue with this mold is that when I texture the tops, it wont fit in my mitre box to cut evenly. I first time I used it I had no trouble unmolding. I do use SL with my cp soap
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
CYNDI • Ohio
Date Submitted: 01/29/2017
I Recommend This Product!
|
|
"Tall & Skinny Loaf Mold" |
|
COMMENTS: Absolutely love this mold. It does bow a bit on the sides, not enough to make a stink about. First time I have ever used a tall & skinny. I think I like this better than a normal loaf mold! Nice to have a little variety for customers. Also noticed a bit of sodium lactate and water discount helps to unmold a little faster.Thanks for another great product!! will be back for another!!
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Etosha • Georgia
Date Submitted: 01/18/2017
I Recommend This Product!
|
|
"Tall and Skinny " |
|
COMMENTS: Loved the New Shape added to the line
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
rex • California
Date Submitted: 12/30/2016
I Recommend This Product!
|
|
"Nice mold" |
|
COMMENTS: I really enjoy using this mold so much that i ordered a second one! I cut my soaps thick at 1-1/4 inches & can get 6 bars out of each mold. They look very nice in this tall stye bar & the soap slides out of the mold easily.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
corena • Oklahoma
Date Submitted: 12/18/2016
|
|
"Tall and skinny" |
|
COMMENTS: I probably won't use this very often. It was a nightmare getting my soap out.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Jennifer • Nevada
Date Submitted: 12/12/2016
|
 |
"Disappointed " |
|
COMMENTS: So I bought this to make the tall and skinny soaps. Well, the mold is not very thick and it bowed as soon as I poured soap into it. Have only used it once and will probably never use it again because my soap turned out bowed in the entire center.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
|
|
• Silicone not thick enough
|
|
|
|
Carl • Ohio
Date Submitted: 11/29/2016
I Recommend This Product!
|
|
"Nice size" |
|
COMMENTS: Came with a kit. Very versatile.
I need more!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Catarina • Sweden
Date Submitted: 11/28/2016
I Recommend This Product!
|
|
"Love it" |
|
COMMENTS: Love it. No need for milkcartons anymore.
|
|
PRODUCT USED IN: Soap - Hot Process
|
|
|
|
|
Debbie • Florida
Date Submitted: 10/26/2016
I Recommend This Product!
|
|
"Love IT!" |
|
COMMENTS: Make cutting the right size bars so easy. Unmolding is very easy with this mold.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• It doesn't need any extra bracing.
|
|
|
|
|
|
Dee • Washington
Date Submitted: 10/07/2016
I Recommend This Product!
|
|
"Sturdy mold showing no signs of ware so far." |
|
COMMENTS: Great loaf mold. The soap slides right out with smooth sides and it doesn't require any extra support.
|
|
PRODUCT USED IN: Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Doesn't need support
• Easy to remove soap
|
|
|
|
|
|
Barbara • Oregon
Date Submitted: 09/30/2016
I Recommend This Product!
|
|
"I have used this mold allot !" |
|
COMMENTS: Loving this mold. Great for drop swirl designs
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Jessica • Maine
Date Submitted: 09/17/2016
I Recommend This Product!
|
|
"Tall & Skinny Awesomeness!! " |
|
COMMENTS: I love this mold for making smaller tall and skinny bars of CP soap. It's just the right size for small batches and I love the sophisticated look you get from these elegant bars. The only downside, which is easily overcome, is that it bows a bit when full. I brace it between two more sturdy objects and/or other molds if I am making more than one. This solves the issue pretty easily.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Durable
• Consistent Quality
• Perfect Size
|
|
• Bows a Little
|
|
|
|
Cheryl • Connecticut
Date Submitted: 09/15/2016
I Recommend This Product!
|
|
"Great size " |
|
COMMENTS: Love this shape mold works well with cp,hp and melt and pour soaps. The only down fall is the soap is hard to get out of the mold sometimes. To solve this place the mold with soap in the freezer for 30 minutes to 1 hour it will release just find after that.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Hot Process
|
|
|
|
|
Aime • Florida
Date Submitted: 08/08/2016
I Recommend This Product!
|
|
"Pretty good" |
|
COMMENTS: It does bow out but I put hard items around the loaf to help it straighten
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Karen • Washington
Date Submitted: 07/19/2016
|
|
"Great Little Mold" |
|
COMMENTS: Bought this to collect left overs from batches and then slice them thin for samples. Works perfect. It does bow in the middle so I have to bump it up against something on both sides to keep the mold perfectly even and avoid it bowing out at the sides in the middle of the mold. Wish it were more reinforced on the sides to avoid this problem.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Nice size for making samples
|
|
• More reinforcement on the sides
|
|
|
|
Tisa • Ohio
Date Submitted: 07/17/2016
I Recommend This Product!
|
|
"Good. " |
|
COMMENTS: Love the mold. Just really hard to get the soap out.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• A different syle of loaf soap.
|
|
• Make it so it is easier to get soap out
|
|
|
|
ronella • New York
Date Submitted: 06/09/2016
|
 |
"Horrible ??" |
|
COMMENTS: I used this mold 4 times and every time I have a hard time unmolding. My soap edges and sides are damaged so bad that I have to cut them. So I never get 8 bars. I get around 6 bars. Plus this mold bows so bad! I'm just cutting all my profit away! ??
|
|
PRODUCT USED IN: Soap - CPOP
|
|
|
|
|
Caroline • New York
Date Submitted: 05/14/2016
I Recommend This Product!
|
|
"GREAT MOLD!" |
|
COMMENTS: Extremely sturdy and didn't bow out at the sides. The size was really good for me because it wasn't too big or too small and I was able to make a medium batch of M&P soap. I really like that it is reversed in the layout and is tall and skinny which will suit certain patterns of soap better. Wonderful and exactly what I was looking for!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Very Solid construction.
|
|
• Nothing
|
|
|
|
Julie • New York
Date Submitted: 04/26/2016
I Recommend This Product!
|
|
"Tall & Skinny Loaf Silicone Soap Mold" |
|
COMMENTS: Great T&S silicone molds! Bows a bit on the long sides but easily fixed with cardboard and tape.
Am buying again!
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy to use
• Easy unmolding
• Easy to clean
|
|
|
|
|
|
Kyrstie • Connecticut
Date Submitted: 04/04/2016
I Recommend This Product!
|
|
"Amazing " |
|
COMMENTS: I absolutely love this mold. It's sturdy, held up to my high top so without having to re-enforce it. It releases the soap very easily. It also is very easy to clean. I will be buying more in the near future.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Rasah • Minnesota
Date Submitted: 03/20/2016
I Recommend This Product!
|
|
"Excellent Quality" |
|
COMMENTS: I am very happy with this mold. The silicone is very sturdy and bars are the perfect size!
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Ruby • Kentucky
Date Submitted: 03/18/2016
I Recommend This Product!
|
|
"Love this mold" |
|
COMMENTS: I'm hooked on the tall & skinny look after getting this mold. Took me a little bit to get the hang of getting my loaf out of it. Now that I do I can pop them right out. Everyone is loving the soaps I've made with it!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Retta • New Mexico
Date Submitted: 03/17/2016
I Recommend This Product!
|
|
"Sturdy" |
|
COMMENTS: I love this silicone mold. I have never purchased CC silicone molds and now that I have, I will not purchase silicone molds from anywhere else.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Sturdy
|
|
|
|
|
|
Amberine • South Africa
Date Submitted: 03/04/2016
I Recommend This Product!
|
|
"ABSOLUTELY THRILLED" |
|
COMMENTS: I was absolutely thrilled to receive my molds. Fantastic size and quality. Cannot wait to start using them. :-)
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
|
|
• None
|
|
|
|
Sharan • Pennsylvania
Date Submitted: 02/28/2016
I Recommend This Product!
|
|
"It's Great Being A "Tall and Skinny" Mold" |
|
COMMENTS: Love this mold. It gives lots of room for me to add details to my soap loaf.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Katherine • Michigan
Date Submitted: 02/27/2016
I Recommend This Product!
|
|
"Great TS Mold! " |
|
COMMENTS: Love the tall skinny size for soaping and this mold works just like other (more expensive) TS molds. Yes you have to support the sides but I don't know of any silicone mold that doesn't require some support for straight bars. This mold makes a perfect size of each bar of soap and is great for smaller batches. If I'm impatient and want to unmold sooner I just pop my soap in the freezer for a little bit and it slides right out.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Nice size
• Good price
|
|
|
|
|
|
Leann • Pennsylvania
Date Submitted: 02/18/2016
I Recommend This Product!
|
|
"Perfect!" |
|
COMMENTS: I don't know how I managed to soap for so many years without a mold like the tall & skinny! Unmolds beautifully, cleans up with barely a wipe and makes the perfect small batch size of 8 bars! I will be purchasing more!
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size, heat resistant, sharp corners,
• super smooth sides and bottom,
• easy release
|
|
• Bows slightly on the long sides when
• full easily fixed with a piece of tape
|
|
|
|
Dorene • Georgia
Date Submitted: 02/06/2016
I Recommend This Product!
|
|
"Loving It!" |
|
COMMENTS: Love my tall & skinny mold! The sides & bottom are sturdy and I don't have to worry about ripping it! Soap came out nice & get more pieces with the same design from it than the regular rectangular molds. Just love it!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• sturdy
• right size
|
|
|
|
|
|
Janice • New Jersey
Date Submitted: 02/05/2016
I Recommend This Product!
|
|
"Perfect" |
|
COMMENTS: I totally love silicon molds. Easy to get your soap unmolded without damage. Gives it a professional finish. The tall, skinny look worked great for a soap I did that looked just like a Mojito drink. Sold out quickly. Clean up is simple.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy clean up
• Easy to unmold the soap
• Clean finish to the soap
|
|
• None
|
|
|
|
Fran • Texas
Date Submitted: 02/03/2016
I Recommend This Product!
|
|
"Easy to unmold" |
|
COMMENTS: Love this mold. It works great with the column molds as embeds. I used this with 3 of the little fish column mold. My next will be the christmas tree with a star on top.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Donna • Florida
Date Submitted: 01/30/2016
I Recommend This Product!
|
|
"great mold" |
|
COMMENTS: I really like this tall and skinny loaf mold. Alot of customers like a smaller soap to hold in their hands so this works out great. Soap comes out of the mold with very little effort. I do like to use sodium lactate in all of my cold processed soap molds. Just me after i had ruined a couple of batches trying to get out of different molds i had used. It is a great silicone soap mold. If filled to the absolute top it will bow alittle in the middle. So what i do is put it on a cookie tray and put a soup can on each side , and that does the trick.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• tall and narrow
|
|
|
|
|
|
Crystal • Ohio
Date Submitted: 01/27/2016
I Recommend This Product!
|
|
"Didn't bend!" |
|
COMMENTS: With other silicone loaf molds I've had problems with the mold bowing out on the sides and bottom, but this one didn't do that. I didn't put a top or overfill - I know sometimes that's the reason why it bows.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Price
• Keeps shape
|
|
• Easier to remove soap (suction)
|
|
|
|
pamela • Texas
Date Submitted: 01/23/2016
I Recommend This Product!
|
|
"Like it" |
|
COMMENTS: It bows out when full
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process, Soap - Shampoo Bars
|
|
|
|
|
Jenean • Texas
Date Submitted: 12/30/2015
I Recommend This Product!
|
|
"Skinny soaps" |
|
COMMENTS: I really like the shape of the bars of soap from this mold. They are easier to hold onto in the shower. Nice smooth sides to the bars also.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
SHERRI • Texas
Date Submitted: 12/28/2015
I Recommend This Product!
|
|
"Tall skinny mold" |
|
COMMENTS: love this mold- it helps for my special orders
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• it flexible and makes a great bar
|
|
• wished it was 2 inches bigger-
• only makes 8 bars not 10
|
|
|
|
Angela • Arizona
Date Submitted: 11/15/2015
I Recommend This Product!
|
|
"Enjoy Using This Mold" |
|
COMMENTS: I have used this mold several times with CP soap and haven't had a problem with it. Its probably one of my favorite silicone mold. I would have liked to give it 5 stars; it just takes some wiggling to get the soap. And, I wish the length was longer.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
|
|
• Length
|
|
|
|
Cindy • Ohio
Date Submitted: 09/22/2015
I Recommend This Product!
|
|
"Great mold" |
|
COMMENTS: I would like if this was a little bigger but am happy with how easy soap pops out of the mold.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy to unmold soap
|
|
• A little small
|
|
|
|
Rhonda • Mississippi
Date Submitted: 09/18/2015
I Recommend This Product!
|
|
"A great size T & S Mold" |
|
COMMENTS: I love this tall & skinny mold. When completely filled, it does bow a little but I just wrap a round or two of duct tape
around it before pouring my soap and walla, no bowing!! Very easy release of hp & co soaps.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size
• Easy release of cp & hp soaps
|
|
|
|
|
|
Becky • Utah
Date Submitted: 08/30/2015
I Recommend This Product!
|
|
"Nice mold" |
|
COMMENTS: We love using this mold to do the tall and skinny soap shapes.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Rebecca • New Jersey
Date Submitted: 08/18/2015
I Recommend This Product!
|
|
"Love it!" |
|
COMMENTS: Absolutaly love love love this mold. My soaps look great and I love the size! Very easy to unmold
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
torim • Arizona
Date Submitted: 07/08/2015
I Recommend This Product!
|
|
"Awesome" |
|
COMMENTS: Does what its made for lol. Only problem is it does bow out a little bit.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Ashley • Pennsylvania
Date Submitted: 05/07/2015
I Recommend This Product!
|
|
"EXCELLENT mold!!!!" |
|
COMMENTS: This mold is strong and sturdy. Built in spines insure that you will not need outside support at all. I love this mold for my M&P sample bars which I slice thin and have unwrapped at reduced cost. Perfect!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Strong sturdy spines prevent bulging.
|
|
|
|
|
|
Mystilyn • Michigan
Date Submitted: 04/21/2015
I Recommend This Product!
|
|
"GREAT BUY. I WANT MORE" |
|
COMMENTS: Love this I bought 2 the best soap product I ever bought. I cut my soap into 1 inch bars so not a big batch but it works for me. I do notice that if I fill it all the way to the top it does start to bow out a little so I have started to leave a little room my bars still come out great palm size exactly what I wanted. It took a little longer for to ship then my other orders but they just came back from being out of stock so I imagine they were trying to play catch up. All in all GREAT BUY!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• easy clean
• great size bars
• sturdy mold
|
|
• does bow when filled to top ( a little )
• Not a great big mold but works for me
|
|
|
|
Kay • Illinois
Date Submitted: 03/19/2015
I Recommend This Product!
|
|
"I Love These Molds!" |
|
COMMENTS: I just tried a batch of soap in the tall skinny molds! I love them!! I will definitely order more. The only downside is that one mold only makes 8 bars of soap but I can deal with that. The price can't be beat either!
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy to use
• Price compared to other tall skinny mold
|
|
|
|
|
| Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information. |
 |
12 Question(s) Shown Below |
| Distributor & Drop Shipper Minimum Advertised Pricing |
As a Crafter’s Choice Distributor and/or Drop Shipper you have agreed to abide by the following Minimum Advertised Price (MAP) for each product and price level. You are permitted to advertise products at a higher price. You may not advertise the products at a lower price. Below you will find the MAP for this product.
|
|
|
|
|
