|
|
Heart Column Silicone Soap Mold 2001 |
|
|
|
 |
Additional
Information |
|
Directions &
Ingredients |
|
SDS &
Documents |
|
|
Make Valentine's Day soap for the loved ones in your life with this mold. We love it embedded in a loaf! Embed fits in Crafter's Choice Regular Loaf Silicone Mold 1501 and Rectangle Regular Column Silicone Soap Mold 2009.
Country Of Origin: China
|  | This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a). |
|
|
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.
Directions:
Melt & Pour Soap: Close the mold by firmly pressing the edges together. For added safety, clamp the edges. Slowly pour melted soap no hotter than 130ºF into mold. Allow soap to harden then open mold and remove soap. Trim edges with a potato peeler or spatula. Embed soap into a loaf or slice into bars.
Cold Process Soap: Close the mold by firmly pressing the edges together, and clamp the edges. Slowly pour traced soap into mold. After at least 24 hours, open mold and remove soap with gloved hands. Trim edges with a potato peeler or spatula. Embed soap into a loaf or slice into bars. Allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Care:
Hand wash mold in warm, sudsy water.
| Average Customer Rating: |
 |
(35 Reviews) |
|
Wendy • Kentucky
Date Submitted: 05/07/2024
I Recommend This Product!
|
|
"Awesome" |
|
COMMENTS: Make sure you use clips to clamp it shut, otherwise an awesome product
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy to use
|
|
• Send clips with the mold
|
|
|
|
Tayloredbytrish • California
Date Submitted: 11/03/2022
|
 |
"Not as expected" |
|
COMMENTS: I do not like the shape of this heart as it is more long than wide. I wish the sides snapped together better to prevent leakage.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
|
|
• I wish it held more soap.
• Heart shape could be rounder.
|
|
|
|
Melisa • Kansas
Date Submitted: 12/09/2020
|
 |
"Wouldn't Stay Together!" |
|
COMMENTS: The first time I used the mold I only filled it half way. The embed was beautiful, kept it shape perfectly! The second time, I *tried* to fill it completely. Once I got past the 1/2 way mark though, it refused to say together. I've got rubber bands, clothes pins and binder clips holding this thing together, and the heart is now misshapen because of it. Would not recommend if you need the FULL embed. I'm really disappointed.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Marie • South Dakota
Date Submitted: 03/04/2019
I Recommend This Product!
|
|
"Heart Mold" |
|
COMMENTS: This mold is very well made and sides are thick and sturdy. It held the soap without having to use binder clips. I have some of the other column molds and I have never had a problem with them leaking.
My only negative is that the heart is a bit too big. It does fit in the rectangular 1501 mold used as an embed , but I think it is a little bit too large.
Otherwise it works great.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Used as embed in 1501 rectangular mold
• Well made
|
|
• Make it a little bit smaller
|
|
|
|
KATHRINE • Minnesota
Date Submitted: 01/30/2019
|
|
"Beware! separates while in use" |
|
COMMENTS: If you don't clamp or tape this together it WILL come apart with raw soap in it. I promise. You'll have a huge mess. I had hot pink soap all over myself, my clothes, my floor and my table. Even after clamping with some clothes pins it tried to come apart any place it wasn't clamped.So cute mold. But if you've used others like this with success without clamping this one is not like those. It'll come apart. Just fyi.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Cute
|
|
• Better Construction
|
|
|
|
Lisa • Indiana
Date Submitted: 01/15/2019
I Recommend This Product!
|
 |
"Fun Mold!" |
|
COMMENTS: Loved using this to make a heart inside another soap!
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• held togther good
• released soap nicely
• great size
|
|
|
|
|
|
Aimee • Kentucky
Date Submitted: 02/06/2018
I Recommend This Product!
|
|
"No leaks, good shape" |
|
COMMENTS: Love this mold! Makes perfect heart-shaped columns that embed well. I wish it were just a hair shorter so that they could be embedded into more sizes of soaps, but otherwise perfect.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Perfect shape
|
|
• A little smaller
|
|
|
|
None • New Jersey
Date Submitted: 11/27/2017
I Recommend This Product!
|
|
"perfect heart" |
|
COMMENTS: This heart is great for embedding. I have used smaller column molds but this make a big impact!I used it with the column loaf mold.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• the size
• ease of use
|
|
|
|
|
|
Christi • North Carolina
Date Submitted: 09/13/2017
I Recommend This Product!
|
|
"Wonderful" |
|
COMMENTS: Excellent mold for CP SOAPERS and melt and pour!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Erinne • Louisiana
Date Submitted: 08/23/2017
|
 |
"Popped All Over My Table" |
|
COMMENTS: Wow... I was so excited when I saw WSS had a large heart silicone mold fit for my needs. Happily bought it and finally came the day to use it. I made a huge batch of melt and pour soap to pour into a few heart molds including this one. Made sure it was sealed and ready to go but when I began pouring in I noticed one side started to undo itself and made it hard to snap back with the melt and pour stuck in it. So I pour out the soap and try again. This time it popped all over my work table, over all the molds I had set out to work with later that day, spilled onto my floor and onto my hands (which felt lovely). I was barely able to make the mold work but I still lost a good bit of my soap I had made.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• The heart shape is huge and long.
|
|
|
|
|
|
Jill • Ohio
Date Submitted: 08/16/2017
|
|
"Dissapointed" |
|
COMMENTS: This mold comes out looking nice but to get to that point is a lot of work, comes apart very easily, actually had to make wood frame to slide it in to hold it.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Theresa • Tennessee
Date Submitted: 02/10/2017
I Recommend This Product!
|
|
"Heart Mold" |
|
COMMENTS: I love this mold,just the right size to make embeds.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Everything
|
|
• Nothing
|
|
|
|
Amy • New Mexico
Date Submitted: 02/03/2017
I Recommend This Product!
|
|
"I love this mold!" |
|
COMMENTS: This mold was very easy to use. I took the advice of others and used binder clips to secure the edges and had no problem with leaking.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Ease of use
• Easy to clean
• Price
|
|
|
|
|
|
JamiAnn • Utah
Date Submitted: 01/30/2017
I Recommend This Product!
|
|
"Nice shape" |
|
COMMENTS: I like this mold, however be sure to clamp edges together with Clothespins or paper binder clamps otherwise it WILL come apart when pouring raw soap into it.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Peggy • Delaware
Date Submitted: 01/26/2017
I Recommend This Product!
|
|
"Hearts" |
|
COMMENTS: So very happy this came early. It will look wonderful as an embed for my melt and pour soaps. I can't wait to start using it!!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Kandy • Florida
Date Submitted: 12/29/2016
I Recommend This Product!
|
|
"Nice and Easy" |
|
COMMENTS: Nice 'n easy... This mold is well made and easy to use. Soap pops right out. The mold stays together with no gaps.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Seams stay together
• No leakage
• Easy soap removal
|
|
|
|
|
|
Barbara • Oregon
Date Submitted: 09/30/2016
I Recommend This Product!
|
|
"Love the colmn molds" |
|
COMMENTS: Works great for my MP designs
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Tami • California
Date Submitted: 08/08/2016
I Recommend This Product!
|
|
"Heart" |
|
COMMENTS: I love these silicone molds. I am not sure why people day the leak? They snap together perfectly and make the most precise embeds...I LOVE IT!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
|
|
• nothing
|
|
|
|
Jeanne • Georgia
Date Submitted: 05/03/2016
I Recommend This Product!
|
|
"Heart Column Silicone Soap Mold" |
|
COMMENTS: This mold works really, really well. I use paper clamps to hold it closed and place the mold in a cup to keep it upright. I use sodium lactate for easy release. There is a slight line that needs to be trimmed along each side, and I do wish it was 10" to better fit traditional loaf molds.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Elizabeth • Florida
Date Submitted: 05/02/2016
I Recommend This Product!
|
|
"HEART " |
|
COMMENTS: I loved it and used it with my clear melt and pour. I used the black big clips that I bought at the dollar store. Excellent. Actually I like everything I have bought from you. THANKS
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Elizabeth • California
Date Submitted: 04/07/2016
I Recommend This Product!
|
|
"Heart Column Silicone mold" |
|
COMMENTS: Very nice mold. I thought it would be smaller. I went ahead and ordered the smaller one. Good quality though.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• quality
• easy to use
|
|
|
|
|
|
Retta • New Mexico
Date Submitted: 03/18/2016
I Recommend This Product!
|
|
"Love it!" |
|
COMMENTS: I absolutely love this mold. Very sturdy and I will forever begin to purchase crafters choice silicone molds!! Very sturdy, I love it.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Sturdy
|
|
|
|
|
|
Julia • Pennsylvania
Date Submitted: 02/08/2016
I Recommend This Product!
|
|
"Great Mold" |
|
COMMENTS: This mold is fun to work with and makes perfect heart shape soap for embeds or just as decorative stand alone soaps. I recommend this mold to anyone wanting to experiment and have fun with their soaps.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• easy to work with, easy to clean
|
|
• nothing
|
|
|
|
tammie • Alabama
Date Submitted: 01/08/2016
I Recommend This Product!
|
|
"I wouldn't say an excellent product, but it's okay" |
|
COMMENTS: I would not say that the heart column mold is an excellent product but a it is a good product. It gave me the shape and design in which I was looking for, but on the other hand, it made a hot mess. I thought I had completely closed the sides with clamps but as I was pouring the soap into this mold, the sides came undone and spilled soap everywhere. All on the carpet, counter everywhere. I lost almost a pound of soap using this mold. If you decide to buy this mold, pleASE make sure that you use many clamps throughout the side of this mold, and pour soap at temp of 123F, put this mold inside a bowl or cup just in case it break through and spill on your counter, using a cup or bowl you can still reheat your melt and pour and nothing is wasted. I am not sure if I will buy another one right now, time will tell.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• free shipping
• the shape and size
|
|
• I hate the way the sides come undone
• when pouring.
• price
|
|
|
|
Anne • North Carolina
Date Submitted: 11/30/2015
I Recommend This Product!
|
|
"Fun product!" |
|
COMMENTS: I was a bit skeptical at first, but now I am a convert. Easy to use, soap pops right out. I CP and then embed the heart into a loaf mold, so every slice of soap has a heart in the center. Customers love this! My only suggestion is to make sure that you hold the sides of the mold shut with something like large binder clips or closepins as it can pop open. If you have them firmly shut, then the column mold is a breeze to use.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Ease of use
|
|
• Better closure system
|
|
|
|
Sonja • Tennessee
Date Submitted: 08/13/2015
I Recommend This Product!
|
|
"Great mold" |
|
COMMENTS: This mold is great!! Easy to release. Just make sure you fill it slowly or it will come apart! I learned from experience!! :-(
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Kirsten • Indiana
Date Submitted: 07/16/2015
I Recommend This Product!
|
|
"So much fun!!" |
|
COMMENTS: I looked at this for a little while before I ordered it. When I got it I had just made a large batch of melt and pour for imbed in my soaps. I put it to work that night! It has an ingenious seal to keep the liquid soap from leaking. It makes little heart sticks so it cools quickly and you can get several made in a short amount of time. I already have about 3 rainbows worth and at least that many that I have sliced into little hearts to decorate the tops of soaps.
I have been watching the other mini column molds just waiting for them to necessary available. I ordered 3 of them this week!!! I guess I better get another batch of melt and pour made up.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• silicone is substantial, feels well made
• the seal around it is tight.no leaks yet
• makes a great in bed for any soap
|
|
• I would have ordered it sooner
|
|
|
|
Kathy • Illinois
Date Submitted: 07/01/2015
I Recommend This Product!
|
|
"Holds together firmly and no bulging issues! " |
|
COMMENTS: I like how the sides firmly "snap" together. As long as you spend the time to ensure they are locked together I have not had any issues with separation,
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Rachelle • Colorado
Date Submitted: 04/08/2015
I Recommend This Product!
|
|
"Perfect size!" |
|
COMMENTS: Love these shapes! I have several of these and like all of them. I did use a rubber band for extra security like the other reviewer recommended. No problem. I didn't think about the length much, but I agree, it would be nice if they were a little longer. I have to make two and a half to use them in my long loaf mold projects as embeds. However, if they were longer, you would have to keep them from falling over with raw soap in them by supporting them some how. But very fun designs! I would buy again.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Jecci • Ohio
Date Submitted: 03/19/2015
I Recommend This Product!
|
|
"Heart shaped soap" |
|
COMMENTS: I made this soap to use as embed for a regular loaf soap. It worked great. Only thing I would recommend is to put rubber bands around to help it stay close. Also it was shorter than my 11 inch long loaf mold.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
YTS • Texas
Date Submitted: 01/11/2015
I Recommend This Product!
|
|
"nice size" |
|
COMMENTS: Easy to pour and easy to release my products. Great for embeds.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP, Lip Care, Lotion Bars & Sticks
|
|
|
|
|
Krista • California
Date Submitted: 12/28/2014
I Recommend This Product!
|
|
"I love this heart mold" |
|
COMMENTS: This mold is quickly becoming my favorite mold. It makes a perfect heart and is super easy to unmold. I pour reinforce the sides with binder clips and pour soap at a thick trace. I absolutely love it!
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Jackie • Georgia
Date Submitted: 12/23/2014
I Recommend This Product!
|
|
"Nice product" |
|
COMMENTS: I used this to hold my cold process soaps. The mold is nice, as long as, you don't try to move it. I tried to move it over a little and the mold broke open and the soap went everywhere.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Sarah • Tennessee
Date Submitted: 10/15/2014
I Recommend This Product!
|
|
"Works well, use clamps for the sides" |
|
COMMENTS: I got this to add some flare to my cp soaps. I ordered the love spell fragrance oil and made a Purple Heart using the mold. I had to work fast to put clamps on it so I wouldnt lose my soap. Other than that it is absolutely perfect.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
veronica • Texas
Date Submitted: 10/13/2014
I Recommend This Product!
|
|
"First timer" |
|
COMMENTS: This was the first time I used a column mold. I turned out great.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
| Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information. |
 |
8 Question(s) Shown Below |
| Distributor & Drop Shipper Minimum Advertised Pricing |
As a Crafter’s Choice Distributor and/or Drop Shipper you have agreed to abide by the following Minimum Advertised Price (MAP) for each product and price level. You are permitted to advertise products at a higher price. You may not advertise the products at a lower price. Below you will find the MAP for this product.
|
|
|
|
|
