|
|
Oval Guest Silicone Mold 1608 |
|
|
|
 |
Additional
Information |
|
Directions &
Ingredients |
|
SDS &
Documents |
|
|
The small classic soaps made using this mold are perfect for the hospitality industry. Create soaps for hotels and bed & breakfasts with this quality silicone mold.
Country Of Origin: China
|  | This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a). |
|
|
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.
Directions:
Melt & Pour Soap: Pour melted soap into silicone mold cavities. Allow soap to cool at room temperature until hard. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Cold Process Soap: Pour soap at trace into the mold cavities. After at least 24 hours, gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface and gently push on the bottom of mold until the soap starts to release. Grab hold of the soap with a gloved hand, and allow soap to cure for 4-8 weeks. Note that some cold process soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Cold Process/Oven Process Soap: Pour soap at trace into the mold cavities. Preheat oven to 170ºF then place mold in oven. Turn oven off, and keep soap in oven overnight. The next day remove mold from oven. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Allow soap to cure for 2 to 4 weeks.
Hot Process Soap: Scoop hot process soap into mold cavities. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Lotion Bars: Pour melted lotion bar mixture into mold cavities. Allow mixture to solidify. Carefully remove lotion bars from mold by gently pulling the sides away from the lotion bars, and then push on the bottom of the mold until the lotion bars starts to release. Grab hold of lotion bar and carefully pull out of mold.
Care:
Hand wash in warm sudsy water.
| Average Customer Rating: |
 |
(49 Reviews) |
|
Belen • New York
Date Submitted: 07/13/2021
I Recommend This Product!
|
|
"I Love this mold" |
|
COMMENTS: I wanted to buy this mold for a while but was curious about what to make. I came across the tea tree honey soap kit and so I said, buy it, I won’t regret it. The mold makes an elegant bar, not too big but not too small either. It fits nicely in your palm. Now I have so many ideas for future soaps to make. Your finished bars release easily and the mold is easy to maintain making sure you’ll get many bars use. You won’t be disappointed.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Nice sized bars
• Easy to release
• Makes 9 at one time
|
|
• Nothing
|
|
|
|
Sandra Lee • North Carolina
Date Submitted: 06/07/2019
I Recommend This Product!
|
|
"Perfect size!" |
|
COMMENTS: This mold is the perfect for facial soaps and shampoo bars.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Shampoo Bars, Face Care
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size
• Price point
• Quality
|
|
|
|
|
|
Susieq1763 • Georgia
Date Submitted: 10/06/2017
I Recommend This Product!
|
|
"Very pleased" |
|
COMMENTS: I received this soap mold in a kit that I ordered. Actually thought the mold that would be in it might be a cheaper one, because some of the kits I have bought from other companies have the really cheap plastic ones in them. This was a nice surprise as it is a sturdy silicone mold that I will use over and over again. I even think the size of the soap mold is perfect for what I was looking for. Very happy with this mold.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• The quality of this mold
|
|
|
|
|
|
Michelle • Oregon
Date Submitted: 03/28/2017
I Recommend This Product!
|
|
"Lovely smooth bars!" |
|
COMMENTS: I love the shiny smooth bars this makes. The size is PERFECT for me. Each bar is consistently 2oz. I will definitely be purchasing more of these!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Cavity Size
• Smooth "texture"
|
|
|
|
|
|
Ginger • Kentucky
Date Submitted: 02/13/2017
I Recommend This Product!
|
|
"Very Sturdy" |
|
COMMENTS: Great Molds!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Shanita • Texas
Date Submitted: 11/03/2016
I Recommend This Product!
|
|
"Great mold!" |
|
COMMENTS: Soaps came out perfectly.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Lotion Bars & Sticks
|
|
|
|
|
Sherry • Tennessee
Date Submitted: 08/24/2016
I Recommend This Product!
|
|
"My favorite shape!" |
|
COMMENTS: I like the shape and size of these bars for making a test batch of a new recipe. I do have to let CP soap remain in the mold for several days to make sure I get a clean release, but that's true with all silicone molds, you just have to be patient. (I don't like to freeze my soap, personal preference).
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size
|
|
|
|
|
|
Ida • New York
Date Submitted: 06/28/2016
I Recommend This Product!
|
 |
"Easy In, Easy Out" |
|
COMMENTS: I made a honey base oatmeal melt and pour soap using this mold. The bars are a great size and easily fit in one's hand. The firm bars are very easy to remove from the cavities.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Ease of removal
• Size of cavities
|
|
• bar
|
|
|
|
Mary • Washington
Date Submitted: 06/06/2016
I Recommend This Product!
|
|
"Guest Silicone Mold" |
|
COMMENTS: These work great, so easy to get product out of
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP, Soap - Shampoo Bars, Bath Fizzies & Salts, Lotion Bars & Sticks
|
|
|
|
|
krista • Idaho
Date Submitted: 06/02/2016
I Recommend This Product!
|
|
"Love this mold " |
|
COMMENTS: Perfect shape for soap
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Shampoo Bars
|
|
|
|
|
Darla • Kentucky
Date Submitted: 05/12/2016
I Recommend This Product!
|
|
"Really like this mold!" |
|
COMMENTS: So easy to work with. Soap pops out easily and rarely with any flaws. This is a small/medium soap mold. It's good for different purposes. I find it to be a good exfoliating bar mold. Every soap maker needs this basic mold.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Leslie • California
Date Submitted: 03/06/2016
I Recommend This Product!
|
|
"Oval guest mold" |
|
COMMENTS: Very cute easy to work with mold. Perfect for guest soaps or for sample soaps or gifts. Cute oval soaps.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size for guest soaps
• Silicone material
|
|
|
|
|
|
MARY • Massachusetts
Date Submitted: 10/09/2015
I Recommend This Product!
|
|
"Perfect for facial soap bars" |
|
COMMENTS: I have been making facial soap bars for acne prone skin. These smaller bars are perfect size for face soap. Super easy to remove hardened soap!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Face Care
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• size
• ease of removal
|
|
• nothing
|
|
|
|
Catherine • Illinois
Date Submitted: 09/11/2015
I Recommend This Product!
|
|
"Silicon Mold the way to go" |
|
COMMENTS: This seems like an expensive mold...UNLESS you've been making melt & pour for a while. Makes plastic soap molds seem outdated and "why bother?" Consistently shaped soaps, easy to pop out, easy to wash. I have three of these already, and may get more, if not this size, then others. A work horse of a mold. If you're planning on knocking out a lot of 2 oz bars, you will appreciate how great this mold is.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Ease of use. Consistent product shape
|
|
|
|
|
|
Sara • Iowa
Date Submitted: 09/11/2015
I Recommend This Product!
|
|
"Another great mold!" |
|
COMMENTS: As with all the rest of the Crafter's Choice silicone molds, this one is great! Perfect for sample sizes or kid sized soaps.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Marie • South Dakota
Date Submitted: 08/11/2015
I Recommend This Product!
|
|
"Nice Size, Great Quality" |
|
COMMENTS: This mold is sturdy and durable. I made pink M&P soap with Love spell fragrance and added rose petals to the top. I also used lemon colored M&P with Lemon Verbena fragrance and added the rose petals. People loved it.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Lynne • New Mexico
Date Submitted: 08/09/2015
I Recommend This Product!
|
|
"Perfect size" |
|
COMMENTS: I love these guest molds. They're the perfect size for sample and test bars.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• size
|
|
• nothing
|
|
|
|
Lori • Florida
Date Submitted: 07/27/2015
I Recommend This Product!
|
|
"Great guest bar size" |
|
COMMENTS: I use this for facial bars and larger sample bars for gift packages. Works very well for making soap. Just make sure to poor on a flat surface and use a movable surface if your soap is not going to set where you pour it.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Jen • Georgia
Date Submitted: 07/22/2015
I Recommend This Product!
|
|
"Love the mold" |
|
COMMENTS: Easy to unmold.
|
|
PRODUCT USED IN: Face Care
|
|
|
|
|
Home • Michigan
Date Submitted: 06/26/2015
I Recommend This Product!
|
|
"PERFECT!" |
|
COMMENTS: Loved everything about this mold, bars came out perfect!!
|
|
PRODUCT USED IN: Lotion Bars & Sticks
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• shape
• flexibility
• size
|
|
|
|
|
|
Kim • Texas
Date Submitted: 06/25/2015
I Recommend This Product!
|
|
"My GO- TO mold" |
|
COMMENTS: I use this mold for practically all my soaps and scrubs. I love how easy it is to hold in your hand. Easier to hold onto than round soaps in my opinion.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Bath Fizzies & Salts
|
|
|
|
|
YTS • Texas
Date Submitted: 06/01/2015
I Recommend This Product!
|
|
"Great Molds! " |
|
COMMENTS: Great Molds! I absolutely love all the Crafters Choice molds. They last, don't bow, easy to clean, and even safe in the oven!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP, Soap - Hot Process, Soap - Shampoo Bars, Soap - Shave Shampoo, Bath Fizzies & Salts, Lotion Bars & Sticks
|
|
|
|
|
jeffrey • Minnesota
Date Submitted: 03/27/2015
I Recommend This Product!
|
|
"Great product." |
|
COMMENTS: I would by this product again.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy to use
• Makes a nice small size soap bar.
|
|
|
|
|
|
SCOTT • Illinois
Date Submitted: 02/11/2015
I Recommend This Product!
|
|
"Love this mold!" |
|
COMMENTS: I use this for my facial bars, perfect size, great shape!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Pamela • North Carolina
Date Submitted: 02/10/2015
I Recommend This Product!
|
|
"Couldn't make my sample bars without it" |
|
COMMENTS: I use this mold very little, but I do love the size of the soaps that it makes just by filling it half way up. It makes the perfect sample size bar. Its big enough to hold on to but not enough to waste of my product.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• size
• how easy it is to remove the soap
• easy clean up
|
|
• nothing perfect the way it is
|
|
|
|
Krista • California
Date Submitted: 02/05/2015
I Recommend This Product!
|
|
"great for samples" |
|
COMMENTS: I use this mold when I am making samples for customers. It makes a nice size bar to giveaway.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Theresa • North Carolina
Date Submitted: 01/28/2015
I Recommend This Product!
|
|
"Love these molds" |
|
COMMENTS: These oval molds hold just the right size soap for my luffa exfoliant soaps. The soap is easy to pop out and customers love the shape.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Exfoliants & Sugar Scrubs
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• size
|
|
• price
|
|
|
|
Danielle • Colorado
Date Submitted: 12/28/2014
I Recommend This Product!
|
|
"perfect size" |
|
COMMENTS: This is the perfect size for guest soaps and for facial soaps!
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Janelle • Idaho
Date Submitted: 11/26/2014
I Recommend This Product!
|
|
"Love the size of these bars" |
|
COMMENTS: I love this mold. I keep it close by in case I have extra soap batter, and have also used it for re-batching. The soaps come out easily and have a wonderful sheen to them. I love the size of these bars, so am here today to purchase another.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Perfect size for sink-side and gifts
• Bars come out super easy
• Wonderful sheen on finished bar
|
|
|
|
|
|
Barbara • Oklahoma
Date Submitted: 11/22/2014
I Recommend This Product!
|
|
"Oval Guest Silicone Mold 1608" |
|
COMMENTS: I was looking for a nice guest soap mold. This mold is easy to unmold and the soap looks so nice.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Gena • Mississippi
Date Submitted: 11/11/2014
I Recommend This Product!
|
|
"Great molds!" |
|
COMMENTS: This was my first try at any kind of soap and the silicone molds were awesome. Easy to use, easy to get the soap out of and easy to clean up. Great product!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
PO Box 785 • Oklahoma
Date Submitted: 11/06/2014
I Recommend This Product!
|
|
"Great Quality" |
|
COMMENTS: I was looking for something other than large round bars or square bars. This is perfect, strong and pliable. Soap easily unmolds and this mold has held up through a lot of soap making.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Pliable
• Smooth edges
• Great bar size
|
|
|
|
|
|
Sherri • Ohio
Date Submitted: 09/20/2014
I Recommend This Product!
|
|
"Crafters Choice™ Oval Guest Silicone Mold 1608" |
|
COMMENTS: I bought this mold because a shop owner wanted smaller more uniform soaps to sell at the same price. I tried it with M & P and the size is just perfect for what he is looking for. I plan on using it for baby soap as well since it is a good size for that as well. I should have bought two.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Lekesha • South Carolina
Date Submitted: 09/18/2014
I Recommend This Product!
|
|
"easy" |
|
COMMENTS: I'm new to soap making, so I ordered a startup set & this mold came with it. The bars it creates are just a tad smaller than I thought they would be, but they are a perfect oval shape & they popped right out of the mold. I tried one mold before & was very unsuccessful, so I'm sticking with this type in the future. These couldn't have been easier to use. Thx
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Kelly • Pennsylvania
Date Submitted: 08/10/2014
I Recommend This Product!
|
|
"Nice mold" |
|
COMMENTS: I love this mold. Releases like a dream and the perfect size for solid lotion bars or guest soaps.
|
|
PRODUCT USED IN: Soap - Cold Process, Lotion Bars & Sticks
|
|
|
|
|
Mary • Nevada
Date Submitted: 07/22/2014
I Recommend This Product!
|
|
"Great mold" |
|
COMMENTS: I have made so many soaps using this mold. Great size for little hands.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Yolande • Texas
Date Submitted: 07/22/2014
I Recommend This Product!
|
|
"Love the simplistic shape of the mold. " |
|
COMMENTS: I use this to make facial bars. It was so easy to take them out. Also, would be great for a guest size bar of soap.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Simply mold.
• Love the shape.
• Will buy again.
|
|
|
|
|
|
Shirley • North Carolina
Date Submitted: 07/22/2014
I Recommend This Product!
|
|
"Oval guest silicone mold" |
|
COMMENTS: I like this mold. It released well and the soaps are a good size. It shows as a larger bar because of the shape.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• oval shape, good quality, good release
|
|
|
|
|
|
Carrie • Virginia
Date Submitted: 04/29/2014
I Recommend This Product!
|
|
"Great size!" |
|
COMMENTS: This really is the perfect guest size soap!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Ashley • New York
Date Submitted: 04/18/2014
I Recommend This Product!
|
|
"Love!" |
|
COMMENTS: I bought this mold to make Oatmeal Scrub Soaps and it is perfect. I love how flexible it is, and does not hold scent which is great!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Flexiable.
• Doesn't hold scent
|
|
|
|
|
|
Hayna • New York
Date Submitted: 04/12/2014
I Recommend This Product!
|
|
"Perfect size for medium tins" |
|
COMMENTS: This mold is heavy duty, durable, does not hold scents, and releases easily. The bars fit perfectly in hinge-top tins. I'm ordering more of these molds because the size is so popular!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Lotion Bars & Sticks
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size, flexibility, durability
|
|
• Nothing
|
|
|
|
Renee • Maryland
Date Submitted: 01/27/2014
I Recommend This Product!
|
|
"My Favorite for Face Bars" |
|
COMMENTS: This mold is a snap to use, super easy clean up. I love to use 2oz bars for gift sets....great size for face bars too! This one is a keeper for sure.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy to use
• Cleans up fast
• Nice size for face bars
|
|
|
|
|
|
Kendra • Arkansas
Date Submitted: 12/06/2013
I Recommend This Product!
|
|
"I Love this mold! " |
|
COMMENTS: Now I accidentally got this one thinking it was a full 4-5oz mold but that was my fault. It works awesome for giving samples, displays, & just a small hand soap! It doesn't bow & has worked wonderfully for me under HOT temperatures! I LOVE how easy of a clean-up this thing is! I can bend it and all the access soap pieces just peel off! I also love how easy it is to get the soaps out after they have dried they just POP right out! No breaks or bends!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Hot Process
|
|
|
|
|
Tip • Georgia
Date Submitted: 12/05/2013
I Recommend This Product!
|
|
"Easy to use" |
|
COMMENTS: Mold is very easy to use and I have had no problems with it since I have had it. Washes very easy which is always a plus when cleaning up after fun soap making :)
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Flexibility
|
|
• Nothing
|
|
|
|
Katina • Florida
Date Submitted: 11/05/2013
I Recommend This Product!
|
|
"Easy to use" |
|
COMMENTS: This is a life saver, I am a silicone fan! This makes 2 ounce bars and my soaps pop out without any mess. I can put it in the dishwasher. Very sturdy and yet flexible. For the price, you will get your money back ten fold.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy to clean
• flexible
|
|
• Nohting
|
|
|
|
Nicole • Georgia
Date Submitted: 10/30/2013
I Recommend This Product!
|
|
"Gives LOVELY Guest-size Soaps!" |
|
COMMENTS: I love, love, LOVE this mold! Easy to pour, EASY to unmold, and the capacity of each cavity is as stated in the description. Love the oval shape and glossy of my soaps, and the soaps are a PERFECT guest-size.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Gwen • Indiana
Date Submitted: 09/08/2013
I Recommend This Product!
|
|
"Great size" |
|
COMMENTS: A great size bar soap. Not huge and not too small. Soap comes out of the mold easily.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Wendy • Pennsylvania
Date Submitted: 08/21/2013
I Recommend This Product!
|
|
"Just what I wanted!" |
|
COMMENTS: I was wanting an oval mold to make my soaps even better and I got it! The soaps are incredibly easy to unmold and I love that it is silicone! Also, I love that is has a total of nine cavities so I can make many great shaped soaps!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Lisa • Michigan
Date Submitted: 06/30/2013
I Recommend This Product!
|
|
"Love the size" |
|
COMMENTS: This is the perfect guest soap size. Soap unmolds easily too.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
| Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information. |
 |
4 Question(s) Shown Below |
| Distributor & Drop Shipper Minimum Advertised Pricing |
As a Crafter’s Choice Distributor and/or Drop Shipper you have agreed to abide by the following Minimum Advertised Price (MAP) for each product and price level. You are permitted to advertise products at a higher price. You may not advertise the products at a lower price. Below you will find the MAP for this product.
|
|
|
|
|
